GALAX PRO Rotary Tool Kit,135W Rotary Tool with Variable
GALAX PRO Rotary Tool Kit,135W Rotary Tool with Variable Speed 8000-32500rpm, 40 Accessories, 3 Attachment Ideal for DIY Creations, Craft Projects, Drilling, Cutting, Sanding, Polishing and Engraving
From the brand
| Weight: | 1.82 kg |
| Dimensions: | 31 x 22 x 9.8 cm; 1.82 Kilograms |
| Colour: | Silver, Black, Green |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | GALAX PRO |
| Dimensions: | 31 x 22 x 9.8 cm; 1.82 Kilograms |
This is so cheap for what it is…does everything a well named brand one does and more. Perfect for so many things and the extension included just opens it up for some many more jobs. It’s a tad heavy but solid and really well built. 100% recommend.
The on/off switch went faulty shortly after the warranty expired.
Easy to set up and quite good quality for the price, small selection of bits to get you started, and all comes in a sturdy case
If you’re considering buying this then it more than likely you need it for a specific job. I needed to reach into a tube and remove some protruding screw tips. It works well and it will remain as part of my workshop tools. Very handy bit of kit.
i reviewed this a few days ago its great but only one problem, the stand looks good but the thread’s for the stand and the nut were not the same so i had to make a new thread that would fit apart from that is good
Bought this as a back up for my Dremel. Only used it a little so far, but seems to do the job.
It was fiddly to construct the clamp and extendable pole it hangs on but if you’re buying one of these you have some common sense and mechanical sympathy to get the bar to screw into the bolts. The threads needed some massaging to start to wind on.
Apart from that it’s an unbeatable price and came same day.
Just for model making not heavy duty but zero complaints so far.
Well worth the money. I bought it for a specific job, and it did the biz.
I’ve got a number of uses for it now.
The flexible attachment is very useful too
I had a dremel that was lent to me, so decided to get something like it. This is perfect, the tool is very good build quality and very quiet at lower rpm. The stand is decent enough and does what it should the other accessories are not as good quality and might be best trying others, still do their job for the most part.
Does what any Dremel style tool will do but one major downside is the clamp that holds the drill in the air so you can use the extension lead. The clamp is plastic and ad I tightened it to the table it bent outwards making the stand with attached drill keep sliding off the table top. Luckily I’ve got an old version made from metal that works. Aside of this the rest is good.
I use it for fragging corals and so far it’s done a decent job, I would suggest running a little bit of oil down the wire because it causes some resistance in torque but not noticeable if running at higher rpm.
I also purchased a set of diamond wheels to use with the set, oh and the lock out for the wire is a little hole in the handle.
This comes a selection of burnishing attachments, and also a flexible drive shaft so that you have much more control of the grinding tools, and not only that, a clamp and vertical support unit to hang the actual drive motor on. Therefore very good kit, in a cary case.
I bought this to cut off a pair very hard to reach bolts that had seized in our car engine compartment. Did the job nicely, using the flexible shaft. Cut off discs are very fragile and I got through five doing the job. Tool is surprisingly quiet in use. It helps to have a bit of knowledge of tools like this as there aren’t any instructions.
Will be getting some more cutting discs on Ebay ( diamond ones will last a bit longer ). Any bits with a 1/8″ shaft will fit this one. For the price you can’t really complain and it’ll be ideal for those jobs where a conventional drill or angle grinder is just too big. Recommended.
If as a DIYer where use is not constant good value and nice to have around. Will be interesting to see how it performs
after time and mutliple times, time will tell.
The only downside, however, is the grinding wheel is not very strong. Fortunately, the kit came with several. Two broke clean off when being removed.
Also, the sanding belt is not exactly safe. The wheel, which holds the belt, is ever so slightly narrower than the belt. As a result, when being used, the belts kept rolling straight off at very high speed.
The drill itself also, heats up rapidly. But then again, it’s practically pocket-sized; and has a very powerful motor.
In my opinion, the tool kit could be better; but for such an affordable price, it’s worth the money. Another plus-side, is the stand, which comes with it.
The stand is basic, but useful.