HNNHOME 870mm Pre – Curve Rubber Plastic Bath Shower Screen
HNNHOME 870mm Pre – Curve Rubber Plastic Bath Shower Screen Seal Strip Perfect for 4-6mm Curved or Straight Glass Door Up to 20mm Gap
From the brand
Shop Our Top Products
Weight: | 60 g |
Dimensions: | 89.5 x 3.4 x 3.1 cm; 60 Grams |
Part: | 1 |
Colour: | Clear |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | HNNHOME |
Dimensions: | 89.5 x 3.4 x 3.1 cm; 60 Grams |
Reference: | 1 |
Seems to be a good quality product but only time will tell. Was perfect for my 5mm thick screen. Easy to trim to length and firm pressure only needed to fit.
This product initially l thought was wrong size as it was long yes l know the measurements are stipulated. Once l looked into it a little further realised it can be cut to size it’s perfect done in exactly what it’s supposed to for the intended purpose
There isn’t too much that can be said about a seal strip, this particular seal was for 4mm glass and a 15mm gap.
These measurements are important as they determine how much the outer water seal (18mm) is in contact with the tub, and the width is how well it hold to the glass.
The original seal supplied with the screen door seal was 24mm and made of very flimsy plastic almost like paper.
Having replaced that seal with this one, the screen looks better and no water whatsoever reached the other side.
Make sure to use a box cutter or other strong blade when trimming the length of the seal as it is quite sturdy and thick in the middle where it would be just under the glass screen.
Very happy and impressed with this item.
it’s durable and easy to put on. hasn’t gotten too dirty yet and was fairly cheap. the only problem i have with it though is that sometimes it’s not as flexible when moving it and can get stuck sometimes
Quite plasticky feel, less rubbery than the original. Relatively easy to fit and was certainly long enough. Large glass shower screen and was approx 6 inches longer (not cut to size yet) but keeps the water in the bath.
Due to the current over length it does get caught on limbs etc and sometimes pops off, when cut to correct size this should be eliminated.
Had to replace bottom edge of curved shower screen over bath. This fits really tight and keeps water in bath without issues. Had to obviously cut down to correct length but that was easily done. Happy with results
This product was ideal to bring a new lease of life into my shower screen. The old one was mouldy and looked disgusting, now the new one is fitted it looks a new screen Easy to fit great for a curved screen.
I tried a straight seal a few years ago where you had to soak it in hot water to make it pliable, not that straight forward. With the preformed seal although a bit more expensive, worth the extra for ease of fitting.
Bought for two shower doors at bottom. Easy to fit. We had to cut the flanges off at the bottom as they stopped doors from closing but easily done and water doesn’t escape.
This item arrived safely and well packaged, within delivery time suggested. It seems a bit stiff but maybe because it is new . I found that I have had to replace it almost every 18 months to 2 years. A short life span for my liking.
Does the job and lasted a while. However, I’m writing this around 15 months after purchase because it broke and am buying again. That’s why I’m giving it 4 stars. But I’m happy to buy again in case it was a one off.
Pur hated this item as my other one wasn’t long enough to stop the water seaping under the shower door to stop the water, trimmed a bot off the end firm and flexible good buy did the job perfect!
Now that it is installed it looks great, almost invisible compared to the original seal.
It was very difficult to install though. Sliding it, we only managed to get it halfway across the screen.
In the end we put it into position, and wedged something underneath to push it up into place.
If you have a P shaped screen I would definitely make sure you buy the ‘pre-curved’ version.
Use appropriate seal, curved or straight accordingly, cut to size and soak in hot water while you rub some liquid soap along the bottom of glass door. It’s a tight fit so be persistent it’s not easy, but very happy with the results in the end.
This seal strip effectively keeps water from escaping under the glass screen on our bath/shower. It was awkward to fit, although I managed it with the aid of some silicone grease and using my wife’s hair drier to slightly soften the plastic.
I have a p shaped bath with glass shower screen on the curve. Have never managed to get one to fit. This took a little pushing but fit much better than others. Only problem is that the bottom bit puckers in places so still leaks. However if you have it going outwards from the bath, it doesn’t leak.
This took literally hours to install despite being the correct size, just couldn’t get it to slide all the way on. With patience however it fits perfectly and looks so much nicer than the old manky one left behind by previous home owners. Instantly freshened up the bathroom. Good value.