Lupo 60ml Vinyl Repair Kit for Hot Tubs, Inflatable Spas
Lupo 60ml Vinyl Repair Kit for Hot Tubs, Inflatable Spas and Above Ground Swimming Pools & Inflatables (Repair Patches, Glue and Application Tool)
| Dimensions: | 15.7 x 4.8 x 4.6 cm; 120 Grams |
| Manufacture: | Hague Global |
| Dimensions: | 15.7 x 4.8 x 4.6 cm; 120 Grams |
Brought to mend a hole in side of spa. Stickiness was good although wasn’t easy to use soon as you apply glue to patch it starts to ruffle up so not so easy to use. But did do the job .
I used this on a small hole in an Intex “burger” pool raft. The pre-cut patches were bigger than I needed for a dry mend of a small puncture in a deflated toy, I think they are more suitable for making a wet mend of a pool? I cut my own patch that was about 20mm across instead.
The patch stuck well, though there’s a bit of a ridge around it where excess glue squeezed out that’s down to me not the glue.
60ml is actually quite a large tube IMO and will last a long time doing the kind of small mends I was doing. It won’t last so long for doing rough underwater mends as you need to be much more generous with the glue.
There is a generous amount of patch material for cutting to size, so this kit could be used to mend a ripped seam.
If you are mending printed vinyl you may want to remove the print where the patch will go for better adhesion, this can be done with false nail remover (acetone). Otherwise the ink disolves in the glue.
The adhesive and patches successfully repaired a cut in a small inflatable bouncy castle.
The only tricky step in the repair is the application of the adhesive to the patch. Having flattened out the patch as directed, I applied the adhesive to one side of the patch whereupon the patch curled in on itself making it tricky to unroll and apply to the item to be repaired. Also difficult to remove all air bubbles. Having said that, the repair has held on re-inflation so it seems to be OK despite my poor technique.
I blew my hot tub up now where coming into summer and it had a tiny puncture in and it kept going flat so I located the puncture and ordered this kit of Amazon and it comes today my hot tub is now back to full working order couldn’t be anymore more happier for the sake of 12 quid it’s just saved me the expense of a new hot tub.
Thank you very much I highly recommend this produc
Excellent value for money. We managed to patch up the small holes at the bottom of our pool even when it was full of water. The mice had a good nibble of the pool but this glue repaired it as good as new.
We have an emergency inflatable bed for when we have guests and it developed a small hole, leading to deflation in the night. This arrived next day and sealed the hole and it has now held for several weeks with many uses.
Do not leave adhesive on patch for too long as it starts to react very fast. Slap it on patch and get it put on asap. At first I didn’t hold out much hope but this is brilliant stuff when cured. Used on a better quality lazy spa in two places with one being a seam on the inflated side which is under a lot of pressure .Been repaired now for a couple of months and lasted brilliantly and still going strong. Well worth the money.
Brought my hot tub out after a long winter to discover 2 holes in it. Used this product and was amazed the hot tub stayed up all summer without loosing any air. Great product.
Found the hole in the hot tub, blew it up, attached some adhesive with a patch and allowed a few minutes to set. This was a few weeks ago and it’s worked a trea
This repair kit was so easy to use glue runny but strong,I used it on a tear on the inside of my paris hot tub were the jets blow out I cut a large piece of patch glued it left it for 24hrs hot tub bubbles work.cant rate this kit highly enough now I’m using it on another tub on a puncture on the outside *****
Can definitely recommend for novices at repair 🙂
Waiting 24 hours was a little annoying, however more importantly it looked a better repair than some kits I’ve seen. Also this is not really noticeable