SolarCentre® Evo SMD Outdoor Solar Powered PIR Motion

Mains Brightness from a Solar Powered Light

The Evo SMD Solar Security Light offers 350 Lumens brightness from a highly compact solar light that offers waterproofing and can deliver 500 activations lasting 30 seconds each from a full charge. The activation time can be set so that the Evo SMD lights up from between 10 seconds and 9 minutes each time it detects motion.

The Evo SMD uses a high performance rubber compression seal and numerous waterproof O-rings on the light body and motion sensor which guarantee waterproofing to IP56 standard.

How Does it Work?

The Evo SMD is fully automatic so once it is installed and turned on you don’t need to worry about it. During the day the sun charges the Evo SMD’s internal battery (supplied and installed) giving it the power it needs to work after dark. At night the Evo SMD will automatically illuminate as soon as it detects motion and turn off after motion stops. At dawn the Evo SMD stops detecting motion and starts charging again ready for the night ahead.

Settings

The Evo SMD’s motion sensor offers three settings, Time, Lux and Sens. These settings can be adjusted by turning the dials on the underside of the motion sensors (see image above).

Time adjusts the length of time the light stays on for each time it detects motion. This can be set from between 15 seconds and 3 minutes.

Sens adjusts the detection range of the motion sensor.

Lux determines how dark it needs to be before the lights will start detecting motion.