Yale YDM-PRO-PVCU-35 Doormaster Professional Multi-Point
Yale YDM-PRO-PVCU-35 Doormaster Professional Multi-Point Door Lock Replacement, 35mm Backset, 16 mm Faceplate, Steel Finish, Suitable for PVCu Doors
Weight: | 1.33 kg |
Size: | PVCu 16/35 |
Model: | YALYDMPRO35 |
Part: | YDM-PRO-PVCU-35 |
Colour: | Grey |
Pack Quantity: | 1 |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | Yale |
Quantity: | 1 |
Size: | PVCu 16/35 |
These are quite expensive compared to similar products – but you definitely get the quality you pay for!
I’ve only fitted them on two doors, but based on the options I think they would have fitted just about any variety of UPVC door.
Just remember to order the correct “depth” to fit your door.
Good universal replacement for my conservatory door and about 20 cheaper than Screwfix
very easy to fit, make sure to see a youtube video and read instructions, look at all parts and understand them, before you start that is what i did it takes about 1 to 2 hours to fit at a slow pace .when fitting the euro lock back make sure you use the small screw if you have a 35mm doormaster 45mm large screw.
This is a good repayment item at a reasonable price, take a bit of time to get it in the right place , but works well
Fitted this to my front UPVC door as existing had failed. Pretty straight forward instruction with plenty of fixing screws. I had some snagging on the keep when the rollers tried to run in the locking channels. I removed all “4” keep channels and refitted one at a time and adjusted individually to suite until all working correctly. Would definitely order this product again. Fast delivery also from the company.
Super easy to install having removed a very old/worn locking mechanism. Didn’t even follow the instructions, simply cut down the sections for the top/bottom hook mechs, offered up to the door and screwed into place. Door jambs needed minimal adjustment and existing frame holes required minimal elongation to accept top/bottom hooks. All in, took about forty five minutes to install.
Friend bought a pvcu door from a well known DIY retailer but the multipoint locking mechanism provided with the door was poor quality. Purchased this to replace it, easy to fit, good instructions, all necessary accessories provided. Took under an hour to complete changeover.
Bought this to repair my tenants door. Arrived on time and good quality. Unfortunately it was just slightly the wrong size which was not the fault of the manufacturer, it’s just there are loads of different types and makes. I returned it with no problems at all and was very pleased with the service and would not hesitate to use this company again.
Good product pity about lack of packaging as it arrived open.
Very easy to fit and works like a dream – just what I needed. I’d been putting off doing it for ages living with a door I couldnylock and my dog could open and let himself out. Should have ordered this lock about a year ago. Very satisfied.
A good replacement lock. This was used to replace the broken mechanism on a set of double upcv doors, everything is working fine, but need need a decent amount of adjustment to lock correctly (not to be blamed on the lock)
Initial impressions not great from the packaging – something that should probably be improved (all parts there, but barely given the damage to the box).
Instructions mostly good. Worth following. If using with upc doors, you may also need to adjust the hinges themselves on the door to get a good fit. e.g. You might notice the door closes, but you can’t lock the handle – the door might need moving towards the keep. I also needed to do a bit of adjustment with a saw to let the main latch go into the frame.
Perfect. Tried changing just the handle gearbox but couldn’t get one to fit my existing door strip so I bit the bullet and bought this product and with the help of a couple of You Tube videos managed to fit it with out too much trouble.
Tried for weeks to find a replacement gearbox for a discontinued roto lock both online and with a locksmith.
Came upon this product which matched all the dimensions etc. Delivered and fitted within 2 hours at a massive
saving over getting someone in or replacing the french doors. Had to fiddle with fitting the latch plate due to the
width of the door and found that removing the mushroom / roller keep plates and fitting and adjusting them one
at a time helped.
Cannot comment on longevity yet but being Yale and coming with a 10 year guarantee can’t envisage any issues.
This item replced my existing broken mechanism. It was simple to fit to the door in a few minutes and then a little time was spent adjusting it to get it working right.
End result was it worked better then the original one ever did and the whole job from start to finishe took less than an hour.
Fitted in about 20 mins but took anothe 20 mins doing ‘minor ‘adjustments to the keep, which is what I expected. Overall a great product and saved me a lot of time trying to find original replaceme
Arrived on time with Yale packaging, fitting the lock gearbox was straight forward, reversing the latch was easy, reversing the night latch was a bit tricky, the instructions is not very clear, but i managed to do it at the end.
Only problem i have is that the gearbox doesn’t lock from outside, it locks from inside without problems, but from outside it doesn’t lock with the key, i will try to contact the seller.
Youtube video that shows the installation is missing some details, like reversing the night latch
Update: I have changed the lock cylinder and this seems was the problem, it locks perfect from outside and inside without any problems
Used this lock unit to replace very old existing lock on front door. Took a few hours to install but satisfactory product when completed. Hope it lasts as long as the old lock. Recommend that the lock unit is installed by someone who is experienced in DIY.
I had a problem with one of my double glazed doors. It was stiff to turn the handle up to lock the door. I removed the locking mechanism and opened it and the two hooks at the top and bottom were knackered. I purchased this in the 35mm version . It wasn’t too difficult to fit. The instructions were not very clear. I had to read it a couple of times. There is a video online to show how to fit it apparently. It did the job. Door now closing exactly as it should be. Recommended product. Make sure you get the right size.
My daughter had just moved into a new house and the lock was showing all the classic signs of age-related failure, so I need to replace it. Locksmiths prices are silly, so with some trepidation I decided to have a go myself. It turned out to be very easy to fit, was suitable for the door and after a bit of tweaking (using the Yale video available on YouTube) it now works perfectly. Very impressed.