EVO-STIK All Purpose Silicone Sealant, Waterproof, Suitable
EVO-STIK All Purpose Silicone Sealant, Waterproof, Suitable for a host of different applications, Colour: Clea
From the brand
Weight: | 299 g |
Size: | 300g |
Dimensions: | 23.29 x 6.2 x 4.8 cm; 299.37 Grams |
Model: | 30811724 |
Part: | 515601 |
Colour: | Clear |
Pack Quantity: | 1 |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | Evo Stik |
Dimensions: | 23.29 x 6.2 x 4.8 cm; 299.37 Grams |
Quantity: | 1 |
Size: | 300g |
Well known make was a re-assurance firstly. I used it externally on my ‘older’ caravan where a slow rainwater ingress persisted. Some rotten wood in one corner from roof or window top. Removed and hardened as much of the remaining traces of rotten wood as possible. At the same time cleaned suspect areas above and around windows and between caravan roof and awning rail. When bone dry, applied sealant fairly generously. Not necessarily as the experts, however as is clear, it was totally forgiving and looked good and unobtrusive. Next wood filler to fill hardened area having established that moisture ingress had stopped completely! Very satisfied indeed with this produc
I used this sealant ( brown) to seal around my garage front door ,window and back door. Just make sure your bead is the correct size.I used a wet finger to tool the sealant and it was easy. It was also easy to go back and add a little to bits that were not tooled as well as one would like. A re-wetted finger and a quick swipe and it was perfect. This product is not as unpleasantly sticky and horrible to use as some and the smell is hardly noticeable. Just make sure the nozzle is kept clean. I found it bonded well and gave a really good finish. I used silicone because the sealant I was replacing was a acrylic sealant and it shrunk away from the wooden frames and was removed easily- I won’t have that problem after using this product as you get a feel of how well it has bonded. Great stuff and well worth the cost.
Used for attaching and sealing the plastic exterior part of an extractor fan cover to the outside facing of a stone wall, without the possibility of any fixing screws. Because the stone facing is “rough-hewn” whereas the fan cover is “square and level”, and because I was standing on a wobbly step ladder with no assistant to hold the fan cover in place, it became a non-trivial task. But it has worked ok so far, and weathered a couple of windy storms.
I tried twice and it failed to stick – got a plumber out and he said that sometimes different brands stick to different surfaces better than others. Probably not a fault of this product but would be handy to know how well it will work in a particular situation.