Fusion – Balmoral Check – Curtain, 117 x 183cm, Ruby

Step 1: Fit the curtain pole before taking measurements

Our eyelet curtains can only be fitted onto a curtain pole (max 35mm diameter)

If there is no curtain currently in place, then one should be fitted first and positioned around the following dimensions.

· 15cm (6 inches) above the window top

· 15-20cm (6-8 inches) either side of the window edges

Step 2: Measure the total width of the curtain pole

Note:

• Don’t measure between the window edges
• Exclude the decorative finials / ball ends

Follow the steps below to select the right panel size for your window.

Step 3: Use the guide below to select the best width of curtain to buy

Our curtains come in pairs and are available in 3 pre-set individual panel width sizes

• Pole width 35” to 63” (90cm to 160cm) – Choose curtain size (46”) 117cms Width
• Pole width 55” to 87” (140cm to 220cm) – Choose curtain size (66”) 167cms Width
• Pole width70” to 118” (180cm to 300cm) Choose curtain size (90”) 229cms Width

Step 4: To select the required drop (length) of curtain

Last step is to determine the length / drop of the curtain from the pole.

Please measure from the top of the pole to where the curtain should drop to:

1) Pole to window ledge – Measure to the bottom of the window ledge and add 2-4” (5 to 10cm)

2) Pole to radiator – Measure to the top of the radiator and add 2” (5cm)

3) Pole to floor – Measure to 1” (3cm) above the floor to allow for ease of cleaning the floor.

Select the drop length required from our pre-set sizes that is more or equal to your required drop

Note: Choose a drop size equal or longer than the measured required length as our ready-made curtains can be reduced in length at any local clothing alteration to fit your window more accurately if required.