Trend Air Stealth P3 Dust Mask Respirator (Medium/Large
Trend Air Stealth P3 Dust Mask Respirator (Medium/Large) with Replaceable HEPAC Filters, Mask for Building & Construction Work, STEALTH/ML
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Plaster, Oil aerosols and Airborne particles | ✓ | ✓ | ✓ | ✓ | ||
| Silica Dust | ✓ | ✓ | ✓ | ✓ | ||
| Wood Dust | ✓ | ✓ | ✓ | ✓ | ||
| Concrete Dust | ✓ | ✓ | ✓ | ✓ | ||
| Brick Dust | ✓ | ✓ | ✓ | ✓ | ||
| Width Outside | 148 mm | 265 mm | ||||
| Length Outside | 150 mm | 205mm | ||||
| Height Outside | 120 mm | 142 mm |
| Weight: | 200 g |
| Size: | M-L |
| Dimensions: | 14 x 10.49 x 14 cm; 200 Grams |
| Model: | STEALTH/ML |
| Part: | STEALTH/ML |
| Colour: | Black/Red |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Trend |
| Dimensions: | 14 x 10.49 x 14 cm; 200 Grams |
| Quantity: | 1 |
| Size: | M-L |
Really impressed with the actual mask and works well, no misting of glasses. However, went to buy some filters to have as spares, and they cost about the same as the mask. Very disappointed and not good value in the long run. Check price first before purchasing.
Of course, this may vary depending on the particular style! But for me, the M/L mask fits well with my (metal frame) glasses. I would suspect that plastic frames, without separate nosepieces, may be a different matter—but at the very least, this style of mask may be worth a try.
It seems to seal well against the face, but again this will vary with face shape and mask size. It’s well worth checking the official measurements, as Trend are pretty good at offering guidance on the choice of size.
The filter inserts are relatively small so may not last as well as some of the larger canister style filters, but the benefit is that they’re much lighter and less bulky. If you’re not using this for protection against significant hazards, you may also be able to get away with vacuuming the filters a couple of times to unclog them, but I’d recommend not doing that if you’re working around particularly hazardous dust such as MDF. (Basically, if you’d want a class M vacuum, use a fresh filter!)
The clip on the strap takes some getting used to, but does do a good job of making the mask easy to put on and remove, other than the fight with the clip!
Usually I’ve gone for disposable masks but glad I finally upgraded. Very comfortable and can be used for 4 or 5 hours without any concerns. Did need to adjust when wearing with close fitting goggles as well but the variable strap position helped. I won’t go back to disposable masks again. These should last for years.
I’m very pleased with this mask, it’s very comfortable also its very light weight! Easy to breath through it and no dust comes through.
I bought it when it was discounted at 40% so I can say its really worth the money lol, but I would even buy it for a full price as it’s really worth that.
I bought this for use in a woodworking workshop, and it is not bad at all, but I can still slightly smell MDF dust after cutting sheets on the table saw when wearing the mask.
Maybe my expectations are too high as it is rated at 3 microns filtering some of the dust might be finer, but it was still a disappointment to smell the dust and maybe Trend should supply 1 micron filters either as standard or as an optio
Having used various face masks over the years at work this one is good .
With the name of Trend any one in woodworking will know the name means quality.
Comfortable, light weight , and effective.
Can’t ask for better , and a great price .
I think this is really good for its money, but sadly it doesn’t fit my face shape very well. I don’t think a small size would work well in my favor as even medium cuts into my nose. I have a high bridge, so I have to sit the mask high to fit face contours, but that leaves a tiny gap under my chin where the mask can’t seal. Not really something you can know beforehand, but despite this I still think this is great for the price.
Great mask I wear glasses and struggle with masks as they steam my glasses up not a problem with this mask every time I’ve worn it my glasses have stayed clear. Very comfortable to wear.
Very good, easy to clean easy to change filters, I can work it for 12 hours Street and I have, very comfortable, and filters sister is good for not get much condensation, I wear for are long hours and don’t get much conversation, very good item.
At last. A dust mask which doesn’t make my glasses steam up! I’ve tried quite a few masks before discovering this one. Each and every so far had me wiping my glasses constantly. I work with a wood lathe and this provides excellent protection. Wood dust can get through an inferior mask very easily, so don’t skimp on a cheap alternative. The replacement filters are a bit pricey but if you shop around you can find them relatively cheap.
Uncomfortable after a few hours of use….maybe I ought to shave my beard off! In all seriousness, protect your lungs… these masks are superb and the filters are outstanding.
Brought for my husband who’s a carpenter. He said this has made a real difference when cutting wood. He does however get really hot when using it so has to take it off at times.
Excellent face mask, great for woodworking and especially valuable when using belt sanders that have bad dust collection. This has been a great purchase and has put all the other masks I have in the shade. Replacing the filters is quick and easy and bit is comfortable to wear for extended periods. As you breath goes downwards it doesn’t fog up eye orotection. All round winne
I’ve had one of the Trend masks for a few years but needed a new one due to breaking the old one. Really pleased with that one so decided to buy another. When it arrived there was a small sticker on the box saying colour may vary due to Covid. I got a green trimmed unbranded mask the same as the cheaper copies available on the market. I hope this as good as the originaland if it is why would I buy a branded version if I ever needed another???
If you wear glasses, be aware that this may not fit.
The nose section, in order to seal properly to your face, comes way up high on the nose, therefore glasses won’t sit correctly.
If you put the mask lower on your nose, it doesn’t seal around the chin.
*EDIT* Amended my rating from 3 to 5. I actually realised that I ordered the M/L version of this mask, but should have ordered the S/M. The mask now fits great and I can wear my glasses with it, so my mistake. It’s actually a really good mask. Make sure you get an appropriate size! The S/M is much smaller than the M/L.
They actually fi
Work well enough but I thought that since they make them in different sizes then the one I bought would fit. Barely. Large people need to look for something else. Recommended with reservations about the size.
I recently took up wood turning, and needed a dust mask. This was my first choice as it fits under a visor. i have now used it a dozen times and clean off the filter after every use. Since using it i have had no trace of dust in my mouth or nose despite working for hours at a time. After 5 minutes I don’t even notice its on.
At 9 price I was rather cautious as to what the quality of this mask would be, especially as it came with filters. I am pleasantly surprised, I have worn it for a good period of times and it comfortable and effective. The filter replacement system is easy and quick and the straps seem to be thick enough to last a while. The mask is very lightweight when on and the exhalation vent is low on the mask, a real benefit as it stops safety goggles from steaming up. After 2 days use this gets a thumbs up from me.
Similarly to what others have said, mine arrived in one piece in an unsealed box. No bag inside the box for the mask either.
Unfortunately I needed it the day I received it so I had to use it.
As it came from the Trend store on Amazon I can’t see how it would be fake or second hand, but it certainly seems weird that in these germ aware times, it was open to the elements.
As a mask it seems to do a fine job though, and I’ve not contracted anything unpleasant, but I would have been a lot happier if it was sealed.
This is the second Trend branded mask I’ve purchased and I’ve just used this one to protect me from dust while clearing out the loft and again while woodworking/sanding.
It fits very well and kept all nuisance particles away from me.
I’ve read some reviews stating they received a green and black version. I received the red and black version and from looking at the masks detail page it’s pretty clear there’s a chance of either colour arriving.
I spoke with the manufacturers before placing my order and discovered both versions are identical. The green version was supplied temporarily to plug a gap due to extraordinary sales however the red and black version should now be available again.
This is a tremendous product, especially at less than 20. There’s nothing else like it in the market.
Today’s job was to breakdown some MDT sheets & whilst done outside, felt that the mask provided a good level of protection.
I have been using this for over 6 months now in a variety of severe industrial dust environments. The mask is easy to breathe in even when absolutely clogged with crap. The filters can be easily vacuumed out to give much longer use than you would imagine, not that new filters are exactly expensive. With the exhalation valve pointing down it is as fog free as it possibly can be. Warm air rises so it does fog when you are at that critical angle. I would totally reccomend this mask to anyone.
The only thing I considered a potential weakness was the strength of the connection from the inhalation covers to the exhalation cover. However as of yet its holding out fine.
Although I wear glasses, and I don’t find them a nice fit whilst wearing the glasses.
If I wear them for a prolonged period they do start to collect a lot condensation.
Good mask that I used to avoid dust as well as paint fumes.
A little in the large size, but does the job while being relatively comfortable to wear.
I noticed I was coming out in spots around my nose and mouth after wearing one for a few days, so I may have had an allergic reaction to the rubber the mask is made of.
Would recommend though as it does the job intended.