Trend CR/KFP/5 C153 1/2-inch Kitchen Fitters Cutter Bit Pack
Trend CR/KFP/5 C153 1/2-inch Kitchen Fitters Cutter Bit Pack (5 Pieces)
PTFE Coated bodies minimise resin and heat build up for cleaner cuts
All Trend cutters have a ‘K’ Mark for safe & correct insertion depth
Highly ground tip face ensures a durable, clean cut that will maintain its edge
Tungsten Carbide Tips for use on all timber and timber based abrasive materials
| Weight: | 345 g |
| Dimensions: | 20 x 12 x 7 cm; 345 Grams |
| Model: | CR/KFP/5 |
| Part: | CR/KFP/5 |
| Colour: | 5 Pack |
| Pack Quantity: | 5 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Trend Machinery & Cutting Tools Ltd |
| Dimensions: | 20 x 12 x 7 cm; 345 Grams |
| Quantity: | 5 |
great blades, I bought the 5 piece kit because I know how fast router blades go blunt, but these last a long time, I did multiple cuts with one blade and its still sharp enough to do more, very sharp and sturdy cut into 40mm high gloss kitchen top like butter with no chipping, highly recommended, great price to boot.
router up to the job as power is vital especially on solid . you want smooth,smooth, smooth.here is a tip , when you open a fresh pack and take one out tape up the remaining cutters with insulating tape to stop them from knocking against each other and you also know which are the new ones…
Great cutters. Bought a pack of these to make several cuts in a solid oak worktop and they cut incredibly clean lines every time. They remain sharp and could probably do 2 cuts per cutter at least. They were so good I used an old one to cut out the sink and it had no problems. Excellent quality
Stayed sharp enough to make both sides of the mitre and create a smooth finish on the end abutting the wall.
Most chippies say that it’s best to use a fresh bit for each join, so this set should be enough for 5.
A must have for doing worktops etc and do last a good time. I used two cutting out 1 sink, two joins and cutting the back of the worktop to ‘fit the wall’
appx 1.5m.