Wireless Parking Sensors Kit, Reverse Radar System with 4
Wireless Parking Sensors Kit, Reverse Radar System with 4 Car Backup Sensor, Wireless LED Distance Display with Sound Warning + 4 Deep Red Car Sensors For Parking for Auto Vans RV Traile
From the brand
Wireless Parking Sensor
Dimensions: | 20.8 x 12.7 x 5 cm; 340 Grams |
Model: | WS-LED068-FR |
Manufacture: | Cocar |
Dimensions: | 20.8 x 12.7 x 5 cm; 340 Grams |
Origin: | China |
Easy installation, works very well.
I put the monitor in my rear window as it’s a convertible, so it can be seen through rear view mirror, then put sensors in the opposite connection sockets so it shows left and right through mirror.
Accurate and loud enough to be used safely.
Would recommend.
Installed on my mitsubishi colt with no issues. Drill bit was very precise and the sensors fit in very snug, easy to wire up and put the beeper away behind the glove box
These sensors work perfectly. I got a mechanic friend to fit them because I didn’t like the idea of pulling this apart and drilling to fit them. My guy used the drill bit supplied. They work very well so far but the only issue is two of them don’t sit flush with the bumper. Not sure if it’s the sensors or my guy fitting them. As I said, we used th3 supplied drill bit but 2 of the sensors stick out from the bumper by about 2mm. Tried to push them flush with the bumper but the small rubber edge on the sensors won’t stay in place. Would I buy again? Yes.
I was a bit dubious about this but decided that as the price was great I’d give them a go. Installation required a bit of thought as the cables for there sensors are not as long as I’d have liked. I decided to break into the reversing light loom to get the power to the main box. Fitting the sensors was relatively easy and the supplied 22mm hole cutter was actually surprisingly good. I didn’t need to file the holes larger and the sensors fitted very well. There is a legend on the rear of the sensors that says “up” so they are installed the right way up.
The cable for the display is very long so I installed the control box and sensors in the boot and then ran the long display cable to the dashboard.
Took me half a day in all but that’s more because I’m cracking on in age and as an engineer, I wanted a god and reliable install.
It’s not mentioned in the kit but the dashboard display has a tiny speaker in it to emit the beeps. It is also surprisingly effective !!
Overall this is an great little unit in my view at the price point and I’m now very happy with the end resul
These parking sensors are simple and seem to be reasonable quality for the price but unfortunately after fully installing them I found 1 sensor not to be detecting anything at all, I tried to move it to different ports with no luck. As I was foolish enough to fully fit before install it is not worth my time take all off to send back for a replacement as it seems to function with one not working but obviously this creates a bit of a blind spot which I put in the middle as it seemed best. Hopefully the seller can see this as I would be giving 5 star review if all was working as just the 3 is massive help with parking but unfortunately there seems no direct contact just return and replace or refund. I would still recommend these to anyone wanting a cheap solution to difficulty parking just make sure to check all sensors before drilling. 😉
Arrived next day with Prime, fitted today Fri 29th Oct 2021 and all seems to be ok. Probably took about half of my day if you take away the Tea Breaks! The only problem I found was that the sensors wouldn’t click into place on the bumper, I cut away the rubber sealing lugs on the sensor bodies and glued them in place using a glue gun on the inside of the bumper. I also gave them a thin coat of paint and laquer to match my car colour and all seams to be working fine. Routing of cables is probably the most time consuming part, I fitted the monitor by my rear view mirror with all cables out of sight. Early days but here’s hoping…
I bought this after my wife revealed that she had a passion for reversing into parked BMW’s, at great expense to my NCB. The colour matches my 2013 Honda Jazz almost perfectly and once fitted they look like they were fitted at the factory. They take a little technical know how to fit as the power supply comes from the reverse light of the car so you usually end up having to do a bit of light wire stripping. Other than that the most nerve racking part is drilling holes into your bumper to fit the sensors. Once all of that is sorted though it all plugs in very easily and works straight away without any set up. I tested the accuracy and it is very close to what it claims so I happy with that. The audible beep and visual indication have long wires so that they can be run up to the dash board where they can be seen and heard but I left them in the boot as the beeper is more than loud enough to hear and I didn’t feel like tuck the wires away behind all of the trim. All in all an excellent product which hopefully for a small out lay and a couple of hours fitting time will save me some headaches in the future.