COMFEE' 60 cm Chimney Cooker Hoods Class A+ Stainless
![COMFEE' 60 cm Chimney Cooker Hoods Class A+ Stainless Steel Extractor Hood with LED and Recirculating & Ducting System Wall Mounted Hood 600 mm with Carbon Filters [Energy Class A]](https://k4s.uk/posts/wp-content/uploads/2023/06/31oeUNb2-hL.jpg)
COMFEE' 60 cm Chimney Cooker Hoods Class A+ Stainless Steel Extractor Hood with LED and Recirculating & Ducting System Wall Mounted Hood 600 mm with Carbon Filters [Energy Class A]
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Size | 60cm | 60cm | 90cm | 60cm | 60cm | 60cm |
| Extraction Rate (Max) | 400m³/h | 320m³/h | 320m³/h | 400m³/h | 350m³/h | 200m³/h |
| Noise Level | 65dB(A) | 67dB(A) | 68dB(A) | 62dB(A) | 68dB(A) | 62dB(A) |
| New UK Energy Efficiency Class | A+ | B | B | A+ | B | B |
| Speed Modes | 3 | 3 | 3 | 3 | 3 | 3 |
| Recirculation Mode | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Dust Out Mode | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 12-Month Warrantyy | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Carbon Filter for Internal Recirculation Mode | 2 Packs of Carbon Filters Included (CF04 Carbon Filter) | Need Separate Purchase(CF04 Carbon Filter) | Need Separate Purchase(CF04 Carbon Filter) | 2 Packs of Carbon Filters Included (CF04 Carbon Filter) | Need Separate Purchase(CF04 Carbon Filter) | Need Seperate Purchase (CC01 Cotton Filter) |
| Weight: | 6.7 kg |
| Dimensions: | 44.8 x 59.8 x 17.9 cm; 6.7 Kilograms |
| Brand: | COMFEE' |
| Model: | PYRA17S-60-Pro |
| Part: | PYRA17S-60-Pro |
| Colour: | stainless Steel |
| Batteries Required: | No |
| Manufacture: | COMFEE' |
| Dimensions: | 44.8 x 59.8 x 17.9 cm; 6.7 Kilograms |
| Origin: | China |
Very happy with cooker hood only a little disappointed because only brought yesterday and fitted today. All good but went back on to see about buying spare carbon filter’s as spares to see that today you can add a 15 off voucher! Wasn’t there yesterday so as I said a bit disappointed. Nothing wrong with hood that’s great thanks
Bought this to replace my existing hood made by Z……. This is better made, much quieter even on full speed and extracts more efficiently. Very pleased with it. Installation straightforward with good instructions.
Just make sure you don’t cut yourself on sharp edges of hood.
Waited a good 2 months to test this before leaving a review. Firstly it was easy to install, even for a novice like me. I cut the the template to length then taped it to the wall, made sure it was level.
I had to order this kit
https://www.amazon.co.uk/gp/aw/d/B01KA8DK0S?psc=1&ref=ppx_pop_mob_b_asin_title
Check that the hole diameter if you’re venting outside.
The extraction is much higher than my previous one, it expels a great deal of cooking smells outside. If you are expelling outside no need to use the charcoal filter.
Contrary to another 2 star review here, the extension piece can be set to whatever length required. You use the bracket provided. As you can see from my photos I only needed a few inches.
The fan noise isn’t too high in my opinion, the first setting is very quiet.
Only thing I’d like changed is the light brightness, which I’ll do when the bulb goes.
The appearance of the COMFEE’ 90 cm Chimney Cooker Hood Class A+ Extractor Hood, I do like and the value for money, the lighting is at the rear and good for the rear, but not bright enough for the front, the Suction is better than my old one and quieter too, I can talk instead of shouting, When it takes a few seconds before the motor work.
My dislike is: not all parts was included or I was aware of, as I needed a Reducer as the extractor outlet is bigger than my outside ducking pipe and I needed to order one, so could not finish setting up the same day.
The finishing for the ducking had no outlet for the main cable, I had to make hole for the wire to past though.
All and all, I would have given it 5*, and I would recommend it.
P. S. Main plug was not uk 3 pin.
There was nothing wrong with the product…. in fact it appeared really good. However, my electrician ruled I ordered the wrong item…. too big for my needs. The provider proved good by accepting the immediate return of the item without any difficulty on their part – for which I am pleased to offer 10/10 for ethical and professional conduct.
This is a good product but a little disappointed with the finish quality of the stainless steel. That being said the fan is powerful and fairly quiet and the light is very bright.
This is a very high quality item and I am very pleased with this cooker hood. The finish is perfect and the design is very stylish. I love the on/ off buttons, again they are very high spec and whilst the design is simple, it looks like pure quality
A decent cooker hood that’s put together reasonably well and appears to be quite robust
It’s not a well known brand, however, it works just fine
It’s easy to install and easy to use, cleaning it is a breeze
Reasonably priced and well worth trying
Came with everything you need. Had a sheet of paper to help measure where you needed to drill. It looks good. Suction works great, there’s 3 levels of suction. It is pretty loud. The light is nice and bright, hard to tell in the picture as it’s daytime. It is easy to clean, but I struggle a little with finger prints when my husband installed it.
We had to buy pretty few bits to get it installed.. But at the end of day it looks pretty good and works very well, suction is good, you can feel difference between all 3 speeds. It’s pretty light and easy to clean.
This chimney cooker hood is very well made with a high (efficient) energy rating. The hood has different fan settings with lights that can be switched on/off during cooking. The hood is easy to install with clear instructions and the necessary screws to install into the wall. The chimney height can be adjusted as it comprises of two sections with a bracket in-place to keep its shape. It has good suction power for cooking smells. It is a good product and good addition to the kitchen. Found the product value for money and would recommend this product!
Having used a similar hood to this for many years, I needed a replacement as the buttons on it were starting to fail. My hopes were that the mounting in the wall would be the same when at this appears from the outside to be an upgraded version (different buttons and LED lighting in place of incandescent bulbs).
Taking it out of the box, I was still hopeful as the chimney is made in a similar 2-section design and the metal is held in place with a back brace. Putting this together is something for two people really as the inner section falls very easily and the metal is quite thin, so can cut if not careful.
Initially I mounted to main fan body and found the mounts had changed, annoyingly only by around 1cm, but enough that I couldn’t reuse the existing holes. Luckily you get a mounting sheet so can mark the required holes for all the mounting plates before trying to mount the hood itself.
With everything mounted, I plugged in the hood (it comes with a 3-pin plug) and fitted the large carbon filters inside (these are replaceable and hopefully by the time they are required Comfee’ with have them in stock – https://smile.amazon.co.uk/dp/B098XFSKXH) I was ready to go. The light at the back works well and is a colder white (bluer) than the incandescent I have used before. The buttons have a good positive feel, and the movement travel gives me more confidence that they will last years. There is some noise when the fan runs but not louder than I expected, and the air flow generated is great for pulling odours and steam away from the hob.
An extra thing I like about these types of cooker hoods is the removeable initial filters (not the carbon ones) are all metal and are easily cleaned by putting them in the dishwasher. They help trap grease etc so do need cleaning more frequently.
Recommended
This was fairly easy to assemble and install, instructions and a wall chart for drill holes are included.
It has good suction with 3 levels to choose from. There’s an LED light at the front, cold white with no brightness setting.
It comes with a plug on the lead but no slots in the hood for the lead to go anywhere so I had to leave a gap between the hood and my ceiling.
I found the metal is a nightmare for fingerprints and marks easily.
As for value for money, it does a good job suction wise but it feels a little flimsy, the metal hood and removable mesh parts flex when wiped and handled. The plastic tube part is very thin and looks cheap but it can be angled and stretched as required.
So to sum up, I found the hood easy to install, the suction works really well and the light is bright enough, and that’s all I need from a cooker hood.
It’s using a proper external extractor fan. Nice control panel with a clear keyboard and is easy to operate, the buttons are power, low, medium, high, and led on and off. Highly reliable suction. Powerful airflow to efficiently remove the most unpleasant odors, steam, and grease. The motor allows the installation of the extra charcoal filter (comes with 2 filters ) which traps some of the contaminants and neutralizes odours more efficiently.
Very good price for what you get, I would recommend it!