Perlegear TV Wall Bracket for Most 37–82 inch TVs
Perlegear TV Wall Bracket for Most 37–82 inch TVs up to 45kg, Low Profile Tilt TV Bracket, Heavy-Duty TV Wall Mount for Flat or Curved TVs, Max VESA 600x400mm, PGLT4
Perlegear Tilting TV Wall Mount | Low-Profile TV Mounting
Large TVs with standard table legs are at risk of tipping over if they are accidentally bumped, so mounting your TV is a smart choice to keep the screen secure and out of reach from kids and pets. Crafted from heavy-duty steel, the Perlegear PGLT4-U TV wall bracket is an ideal mounting choice.
Easy 3-Step Installation
Compare with Other Perlegear TV Wall Brackets
 Tilt TV bracket |  Tilt TV bracket |  Tilt TV bracket |  Tilt TV Bracket | |
| TV Size Range | 37-82 Inch | 37-82 Inch | 13-42 Inch | 26-55 Inch |
| Max. Load Capacity | 45kg | 60kg | 45kg | 45kg |
| Max. VESA | 600x400mm | 600x400mm | 300x300mm | 400x400mm |
| Tilt Angle | 0°~8° | 0°~7° | 15°~-15° | 0°~8° |
| Wall Distance/Extension | 37mm | 30mm | 62mm | 32mm |
| Dimensions: | 44.5 x 10.8 x 4 cm; 1.2 Kilograms |
| Model: | PGLT4-U |
| Manufacture: | Perlegear |
| Dimensions: | 44.5 x 10.8 x 4 cm; 1.2 Kilograms |
I used this to put a telly in my sunhouse the best thing was the amount of screws and washers different lengths and sizes it was so easy to put up
I used it for a Panasonic tv with 26″ between the fixed bolt holes. As the plates are bolted to the wall, I opened the two plates at the centre and the set is now secure on the wall. The unit has done the job perfectly, thank you.
Bracket easy to assemble, accessories (screws/spacers) perfect, the spacers capture the bolts used so they don’t fall off when fitting rails to back of TV, great feature. Good tilt adjustment, well worth the money would buy again.
Great build quality and really compact not taking up too much space. Very easy to install and comes with it’s own clip on spirit level which came in handy. Many fitment options to accompany LEDs on the TV ect. Would recommend to anyone.
We were dreading putting this up but it was a cinch. The hardest part was lowering the TV into place (because it’s such a slim fitting. Top tip, set the rear TV fitting to max lean forward and hang the tv then push it upright (if that’s how you want it) and then tighten the holding screws using a VERY long screwdriver (if your TV is wide).
It’s very sturdy and we can’t believe it only took 30 minutes from pack to hang on wall. The supplied mini spirit level is a nice touch, which means the wall bracket was easy to get exactly level.
A wall mounted tv saves space and looks so much better. This is Suitable for 37 – 82 inch TVs. It’s very easy to put up. The most time consuming thing is finding the wall studs (i use a strong magnet and just wave it around until it stick to a screw, then go up to confirm there’s a few more and it is a stub and not a random bracket). They include lots of screws. So just attach the larger bracket to the wall (making sure you attach screws to the studs or use plugs for brick/cement walla), then attach the strips to the back of your tv and lift it onto the wall bracket. It’s a good idea to put a large pillow underneath should anything bad happen. It’s also a good idea to use 2 people to lift the tv onto the bracket as it can be akward and heavy. The brackets are solid and strong. You can tilt the tv up and down but not to the side. Or pull it out from the wall so accessing sockets in the back can be tricky.
Got this for my 42inch tv and it fits perfectly. Easy to install but didnt come with great instructions. Everything came with it like screws etc. Did need another set of hands to help. Overall good bracke
I have no hesitation in recommending this bracket.
This is a pretty nice bracket to use and for the price it’s even better.
There is even a level included so you don’t mount it wonky.
I put up a 50inch TV with this and it fits against the wall with enough space for the cables. It can tilt so you can get a perfect viewing angle and putting up and taking it down is very simple; it has a mechanism which auto locks in place and can be released by pressing it.
I’ve been using it for almost a month and my TV hasn’t fallen down, so it’s doing its job perfectly 10/10.
It can practically support any TV from 37–82 up to 45 kg.
Maximum compatibility and ease of installation.
The structure is basic and simple. The material with which it is made is robust and resistant.
Solid offering a particularly stable solution.
Tiltable to obtain the best viewing conditions.