Reversing Radar Extension Cable, 2.5M 8Ft Extension Cable
Reversing Radar Extension Cable, 2.5M 8Ft Extension Cable for Car Auto Parking Radar Sensor Kit – Only for Rear Sensors
From the brand
Wireless Parking Sensor
| Dimensions: | 2 x 10 x 1 cm; 80 Grams |
| Manufacture: | Cocar |
| Dimensions: | 2 x 10 x 1 cm; 80 Grams |
| Origin: | China |
| Reference: | LED070-EXC |
Los he instalado en una autocarabana de 6,5m de largo y ha llegado el cable relativamente bien. Compr el kit de 8 sensores, ya que trae 4 de 2,5m y 4 de 6m aproximadamente.
En cuanto a los sensores como tal funcionan bien, al ser un vehculo tan ancho hay algunos puntos ciegos si no distribuyes bien los sensores a lo largo del ancho del parachoques trasero.
De noche funcionan bastante bien tambin, y de da no tienen problema en detectar obstculos a 2m o as.
Achet ce produit ,pour un jeune conducteur,3 aprs-midi de travail, rsultat satisfaisant, voir dans le temps , bien rflchir pour le perage des pare-chocs , car il se peut que les dtecteur ne passent pas, notice succincte, pour un pack 8 capteurs il y a un plus ap contact et lr contact de frein et marche arrire cabler , pour l instant le rsultat est intressa
Funziona bene ma non eccelso. Plastiche del monitor povere. Abbastanza preciso nel complesso. La fresetta fora un po’ pi largo rispetto al diametro dei sensori. Quindi ho dovuto usare un po’ di silicone per fissarli.
Car this was fitted to was easy to get from bumper to internal wires in lamps. Installed the “sounder” at the rear to avoid getting the cable to the fro
L’installation n’est pas si simple car nous n’avons de notice (relle) et pas juste un papier qui dcrit les fils, mais sinon cela fonctionne bien une fois que l’on a compris
Bonne rception dans les dlais.
J’ai pris le pack de 8 radars (gris fonc)
Installation sur une Polo 4 qui n’est pas de la mme couleur mais passe inaperu.
4 radars avant et 4 arrires.
Les BIP sonnent partir d’1m et moins.
Be careful with the wires running from the front, for some cars they might be short. Consider well where you place the control box to allow all the wires reach it.
It is also important to well consider the positions of the sensors. Don’t put them too low, they might detect the ground.
When you reverse, the 4 rear and the two front corner sensors are working. After pressing the brake pedal all 4 front sensors are working for a while, but definitely not for 15 seconds, maybe for 5-8.
Some people advised to turn the sensors upside down if they detect the ground after installation. Don’t. The sensors are bent upwards a little bit if they are in the right position. You can put a spacer or something under the bottom of the sensors to turn them more upward. After two days playing with them they now work perfectly.
Well worth the money, but think about the installation time or money you spend on getting it done by a mechanic. If installed properly, they work perfectly.
Fortunately the colour I have ordered almost perfectly matches the colour of my wife’s little Suzuki. She had a factory reversing camera, but preferred to have radar as well.
La instalacin es algo complicada puesto que tienes que tener toma de ACC (positivo de contacto, al estar el contacto del coche puesto), buscar el cable de luz de marcha atrs (para activar los sensores traseros) y buscar el cable de freno, para activar los sensores delanteros (supongo, an no puse stos).
En general por la relacin calidad-precio y la instalacin, que lleva su tiempo para dejarlo bien rematada, estoy super contento con la compra. Lo recomiendo encarecidamente.
guide en langue trangre pour pas changer…manque de prcision sonne un peu tout le temps(appuis sur le frein: sonne… obstacle imaginaire sonne)bip un peu trop aigu mrite rai un rglage mais c’est un gadget vous n’aurez pas le rendu que l’on as sur un vhicule quip en srie :rien voir!!!!!!!!
The installation instructions were a joke. The colour of the wires on the product did not match the diagram. The propduct was bought because it had 8 sensors. The installation instructions that were supplied hinted that only two were needed for the front. * sensors were provided in the kit, with socked to connect each one. However. 2 of the sockets did not work (the sensors did as I was able to try them in other sockets). The distances measured appeared to be accurate enpigh for my need. The audible signal in way too loud. A bit of Black Tak type material fixed that Just have to fit it n ow, once I have worked how where the wiring goes.
Would I buy it again? Probably not. For the price and quality, it’s not worth the effort needed to fit it.
PleaE could the supplier give me details of where the wires from the cluste , the blue wire, red and black wire and green wire are to connect to to get power ? In the instruction there is a yellow wire but no wire cam just from the red DC12v cluster 1 X5 black/red wire, 1 x blue wire and 1 grew wire many thanks