Uncategorised

Basin Sink Waste Slotted Pop Up Click Clack Sprung Plug

Basin Sink Waste Slotted Pop Up Click Clack Sprung Plug with Overflow for Bathroom Sink Tap Frap, Brushed Gold

Step 1

Put the upper washer on the basin hole (Fits basin with hole diameter 45mm)

Step 2

Put the main body into the sink

Step 3

Place the lower thick washer, gasket and nut on the threaded part

Step 4

Tighten the locking nut



color	gold	gold	gold	gold	gold
for	bathroom	bathroom	bathroom	bathroom	kitchen

Check Offer Price

Weight:	280 g
Dimensions:	11.2 x 7.6 x 7.2 cm; 280 Grams
Colour:	Gold
Pack Quantity:	1
Batteries Required:	No
Batteries Included:	No
Manufacture:	FRP
Dimensions:	11.2 x 7.6 x 7.2 cm; 280 Grams
Quantity:	1

Tags: Bathroom Kitchen

Anonymous says:

11/07/2023 at

Used for replacement of a plunger type fitting before which broke. This was so easy to fit that did it myslef with no plumbimg experience other than usual DIY experience. Robust and well finished.
Eunice says:

25/04/2023 at

I don’t often write reviews but felt this Click-Clack Waste warranted one:
A nicely made product, I selected this one to replace the broken one in my bidet because it didn’t have the makers logo etched on the mushroom!
Fitting wastes to basins is always fraught with problems and I often have to resort to using Plumbers Mate to get them water tight. This one seals to the basin well with nice compressible gaskets and a brass nut. But, there is still a leak path via the thread of the body nut, especially as it is threaded all the way up to the overflow slots. I wound some PTFE tape on the thread in the area where it tightens and it was leak tight with the nut hand tightened. Over-tightening with a spanner risks breaking your basin and won’t help. No messy putty or sealants.
This waste was a few mm shorter than the original but the waste pipe lifted enough to compensate.
Anonymous says:

22/10/2021 at

Reasonably priced sink waste unit, easy to fit and works satisfactorily.

Simple to fit, didn’t really need the supplied instructions. The item is designed to fit using only the washers provided, however to be on the safe side I added some clear silicone between the washers and the sink, and no leaks!

Am pleased with the item, looks nice and works ok.
Anonymous says:

03/12/2020 at

A quality product that was extremely easy to fit. So pleased with it that I bought a second for the en-suite! …and as a bonus the tapered washer at the bottom sealed perfectly.
Anonymous says:

29/08/2020 at

Looks fantastic and good quality build Really easy to install took ten minutes and I’m no plumber remember to use the two plastic washers underneath the basin before tightening the brass nut. I would recommend applying a small ring of sylicone to each washer to ensure no leaking
Anonymous says:

05/06/2020 at

bought this because the old one kept sticking. this push sink plug is sturdy & well made, the only thing thats confusing is the instructions. dont go by the paper work , go by the amazon pictures. theres a flat washer that is mentioned nowhere . this flat thin plastic washer goes directly onto the brass nut. i never fitted it the first time & the sink leaked . after fitting the flat washer to the brass nut it seems now that everything is water tight . i would recommend
LindseyRimmer says:

24/04/2020 at

Exactly what I required and works well. Although advert advised it was solid brass and it mighg be. But in my experience it seems too light. However its well made and does the job so I’m happy with purchase.
Anonymous says:

02/02/2020 at

Got this to replace a failed pop-up plug (2 in 7 years) they had failed as the hard water causes them to ‘chalk up’ the design of this one is different, you can unscrew the top making it easier to ‘de chalk’ did mean changing the whole unit- which too about an hour and a half, of which most of that time was getting the old one off, cleaning off the silicone sealer etc. Fitting this one took 15 minutes, and was simple. It seems very good quality and looks good. Time will tell if it ‘chalks up’ but am optimistic. It was also well packed and protected so it did not get damaged in transit. Great produc
fallingtoearth says:

26/10/2019 at

Just the job – I previously had a tap with a pull up/push down plug which was useless as the metal rod that moved the plug kept coming loose and therefore stopped working until you went under the sink to retighten it! This was surprisingly good quality for the price and works well – wish I’d changed to it a couple of years ago!