PZOZ (4 Pack) Airtag Holder Stick-on Mount Case for Apple
PZOZ (4 Pack) Airtag Holder Stick-on Mount Case for Apple Air Tag, Sticker Cover Hidden Protective GPS Tracker Accessories, Bike, Bicycle, Car, Luggage Tag, Loop, Motorcycle
| Dimensions: | 10.2 x 10.2 x 1.8 cm; 40 Grams |
| Manufacture: | PZOZ |
| Dimensions: | 10.2 x 10.2 x 1.8 cm; 40 Grams |
| Origin: | China |
The holders are constructed of sturdy plastic just large enough to hold an AirTag without excessive rattling. There is an adhesive pad on the bottom so you can conceal the unit conveniently. There is a decent depth of thread on the two pieces so I don’t think there’s much risk of the lid coming off by mistake.
I’m new to Apple AirTags (I know, I know) but I’ve recently invested more into the ecosystem which prompted me to look into ways to keep an eye on the varying tech and ideally give me a fighting chance to track down my possessions heaven forbid anything gets stolen.
To help me achieve that goal I wanted a protective case that would keep them in place, protect them and conceal them from the average prying eyes.
I bought this pack of 4 and installed them in various places such as my tech bag, iPad setup kit (went full iPad only set up last year), and car.
They are nice and compact, have a slim fit and smooth texture design and most people wouldn’t assume they contain AirTags.
Note:
When you place the AirTags in these cases it will pretty much render the beeping alarm useless so if you want to be able to hear your AirTags I recommend you buy a case which has the sides on display.
I actually modified mine by removing the speakers because I don’t want a would-be thief finding my AirTags too soon when they are notified there’s one travelling with them.
I stuck the car one under the bonnet so it’s not easily accessible and I’m pleased to say the casing, screw function and the 3M tape is all holding up well so I hope this gives you some confidence in that function.
I was flying with a brand new 8K wheelchair and wanted to ensure it’d be safe. This was perfect, it’s extremely firm and doesn’t come off – but no one would know that it’s an AirTag holder, so they wouldn’t think to take it out either. Love this!
I liked these, but as a closed container it means the sound generated by an air tag is very much attenuated. The air tag beep is weak at the best of times, so enclosing it makes it even harder to hear. That’s more the fault of the air tag. I like this product.
I specifically got these AirTag cases for use in the car, having a few instances of thefts in the area, made me a little conscious of having some of my own security measures in place. I was actually expecting just a single case and was surprised to find 4 in a pack, which is incredible value. I’ve seen many such cases previously on Amazon, but they looked cheaply made and overpriced, these, on the other hand, are very well-made and designed and look almost like a camera lens cover. They feature rubber padding on the inside to provide protection and avoid scratches to the AirTag, and they screw on smoothly once the AirTag is fitted.
Each case has the Pzoz branding on the covers and a 3M label on the bottom making it easy to attach to your valuables. They’re waterproof, small in size, which makes them undetectable and can be placed practically anywhere on a car, bike or luggage. Personally, I’ve hidden mine under the bonnet of my car, and it’s practically invisible.
This is a very good solution for protecting your valuables, not only does it work well, but it’s designed with thought and purpose. Definitely a recommended product.
These are just what I needed to hold my AirTags inside large mobile electronics. Previously I’ve ‘glue gunned’ the tags in place but when it’s time to change the batteries it becomes a chore. These, with their 3M self adhesive pads mean I can simply unscrew the lid and take the AirTag out, swop the battery, and it’s all back in place in moments.
They are also small enough to be inconspicuous which is very important.
Nice bit of kit.
Good quality plastic with some rubber material inside to prevent the AirTag from sliding around too much. I’ve ordered these cases to put in the cars, so I have no need for them to be waterproof.
However, I did a little experiment to test the stated IP68 effectiveness as I was a little skeptical due to the low price. I’ve put one of the cases in a glass of water for 12 minutes. The case had a folded piece of paper inside, which was kept dry throughout -see attached video for the experiment.
These are great. The sticky pad is 3M adhesive so it should endure. They’re fully waterproof too so I’ve stuck one to a pair of skis. The build quality feels good.
This product is genuinley a really good idea, and something that I had not thought about before myself.
The fact that this holders are adhesive and also IP68 waterproof means that there are so many uses for them! So far, I have attached one to my car to hold an AirTag, as well as another to my bike. Each time, the process has been really easy, with the adhesive acting strong and binding quickly, and the holder performing a stellar job at holding the AirTag.
At 16.99 for four holders, I feel that perhaps this product could be a lot more affordable, considering they are just plastic holders. However, it cannot be denied that they do a great job at their intended task, and offer those who use AirTags more options on how to mount or secure them!
It was only after I received them I realised it was a pack of 4! A pleasant surprise.
Feel really well made, nice secure screw fit and the AirTag fits nice and snug as a bug.
3M double sided tape attached. I secured mine with the tape and superglue just for an added level.
Strong pack of four tag holders that work well with other tags made from strong plastic with 3m sticker on the base, make sure you clean the area first to get maximum stick, I like the way this unscrews easy good value for money see pictures to show mounts so many places you can put them to be able to located your items with ease
Got these to put an air tag into the car, well made and the lid screws on tight with a self adhesive pad, you can deposit it almost anywhere.
It says the lid is watertight but I will placing mine inside of the car hidden.
It comes as a 4 pack although I only needed the one , for now anyway.
Yes I would recommend this item.
I already have some quite nice AirTag cases for use with our keys and was going to use a spare one for my car but when I saw these they looked much more suitable so I ordered them and I’m glad that I did.
On opening, this set comes with four identical AirTag cases which look well made from an ABS type of plastic so are very strong and being black they can be tucked away out of sight to act like a tracker for the car without the need for a subscription.
I placed one of my AirTags inside one of these units which fitted perfectly inside and is protected by two silicone pads that hold the AirTag securely in place and hold it tightly. I next set the AirTag up to my iPhone and made sure that it was being detected properly which it was and I had no issues with the pairing.
I then fitted the case using the double sided sticky pad thats pre-fitted to the case to the underside at the top of the cars glovebox so it is well hidden and not likely to be found by anyone.
My wife used the car to go shopping the next day so I thought it a good time to test the tracking capabilities, unfortunately I found that the AirTag was a little intermittent in showing me the location but thats due to the way that the AirTag works and not a problem with the case. After the car had been parked at the supermarket for about fifteen minutes it did then show up on my phone with the correct location so if the car was ever stolen I believe that this will work as a low cost tracker.
Well built and sturdy case thats easy to use and secure in place.
Recommended.