HumanTeck Dual Monitor Arms for 17 to 35 Inch Screens, Heavy
HumanTeck Dual Monitor Arms for 17 to 35 Inch Screens, Heavy Duty with Increased Load Capacity from 2-16kg, Tool Free Tilt Swivel Height Adjustment Monitor Stand Desk Mount, VESA 75/1
This height-adjustable monitor stand conveniently routes power and AV cables through the arm pocket for clean, discreet cable management. The maximum height is 21.26 inches, so you can adjust it as needed while sitting or standing. Expand your screens 22.24 inches forward to see them closer.
These monitor arms are awesome. They work great for my two screens, which are 34 inches each. The setup was pretty easy too. They feel really sturdy and can hold my monitors without any problems. I like that I can adjust them to the perfect height and angle for me. It’s made my workspace much more comfortable and organized. Overall, I’m really happy with my purchase
The arms can both be on the same side and it’s designed so the separate arms don’t bump into each other. Building it out of the box was extremely easy, and actually quite fun. The monitors fit easy, and were held up well. The spring assisted arm works extremely well and adjusting it for the monitor weight is the simplest thing ever. 10/10 would recommend. For the mid-range price, you would definitely be getting a top tier product.
Overall it works great, the build quality is very good, the gas arm system is smart and it can hold heavy monitors, but some important notes to bear in mind.
First, I personally found it very difficult to mount a large monitor. I’ve used other stands where the VESA mount was detachable, could easily be screwed onto the monitor then the whole thing just slides onto the stand. With this one you are supposed to mount the monitor to the VESA mount while it is attached to the stand. I found this difficult and risky, but eventually got it on. The screws provided were also too short, but luckily I had longer ones from my old stand.
Second, each arm has two plastic cable management trays each of which has a different mechanism to slide and lock in place. Space is very limited in upper one and it is hard to lock in place. The lower one is easy to slide and lock but falls off easily when too much pressure is applied to it. It can be difficult to channel more than 3-4 cables coming from a monitor through the upper channel, especially if they are thick cables. I had to ditch the upper one and buy sticky hooks instead.
Finally, if you’re planning to mount a monitor on one arm and laptop on the other it does work, but placement is tricky. I had to put the base at the very end of my desk to get my external monitor near the centre of the desk and the laptop off to one side at an angle. I think it is really meant for mounting two monitors, but it did work out for me in the end thankfully. It does look a little weird having the base at the edge of the desk but it works.
Very happy overall but not without its quirks.
Klare Empfehlung meinerseits. Ich habe zwei 34″ UltraWide (21:9) Monitore angebracht und bin mit dem Ergebnis vollends zufrieden. Die Montage ist sehr einfach, alles in allem rund 20 Minuten. Die Kabel lassen sich sehr schn unterbringen und die Flexibilitt der Arme ist schon ein nettes Feature, auch wenn es fr mich eine eher untergeordnete Rolle spielt.
Ein Hinweis an dieser Stelle:
Wer, wie ich, curved-Monitore verwendet, bentigt vermutlich noch ein paar Distanzbolzen; in meinem Fall 35mm (M8). Htte man fr das Geld aus meiner Sicht auch beilegen knnen, aber das soll jetzt kein Kritikpunkt sein…
Ottimo supporto per doppio monitor, ho installato sopra 2 monitor da 27 pollici di cui uno pesa abbastanza all’incirca 9kg e il supporto riesce a tenerlo molto bene.
L’installazione molto semplice si ha la possibilit di avere pi scelte secondo lo spazio di cui si ha
Il fatto che si possa regolare facilmente in altezza molto conveniente rispetto ad altri che ogni volta andavano svitati
La gestione dei cavi ottima si riesco ad inserire pi cavi all’interno dei passaggi predisposti
Ottimo supporto davvero consigliato
Ich habe von meiner Arbeit 2 Bildschirme fr Hybridarbeiten bekommen. Und fr die beiden schweren 24-Zoll-Bildschirme, brauchte ich einen Schwenkarm, der stark und robust genug ist. Ich bin sehr beeindruckt von diesem Halterung. Der Aufbau war relativ einfach. Mir wurde klar, dass es fr diese Halterung besser ist, Bildschirme mit dnnem Rahmen zu kaufen. Ich brauchte einige Zeit, um mich an dieses Setup zu gewhnen. Auerdem musste ich den Tisch etwas von der Wand wegziehen, um sicherzustellen, dass die Monitore nah genug dran sind. Worber ich nicht sehr glcklich bin. Insgesamt bin ich zufrieden, denn jetzt kann ich meinen Bildschirm in die gewnschte Position bewegen.
Positiv:
– sehr stabil, auch nach der Montage meiner schweren lteren Monitore
– spart Platz auf dem Schreibtisch
Negativ:
– die Flexibilitt, die Bildschirme nahe beieinander aufzustellen, ist nicht so einfach, wie ich dachte
Fazit:
Insgesamt bin ich mit der Qualitt des Produkts zufrieden. Es hlt, was es verspricht. Die Montage der Bildschirme an den Schwenkarmen war einfach und erforderte auer einem Schraubenzieher nichts weiter. Die Verarbeitungsqualitt ist ausgezeichnet. Ich wrde die Verwendung mit eher neueren Bildschirmen mit dnnerem Rahmen empfehlen.
P.S Wenn Ihnen meine Rezension gefllt, wrde ich mich ber einen Daumen nach oben freue
This is easily the best monitor arm I’ve owned.
It’s made completely out of stainless steel with a matte black coating and looks just dominating. I love it.
It has trails under the arm for wire management and it’s covered with plastic flaps.
It was fairly easy to assemble and to mount my monitor and laptop on it.
It’s easy to move around and change the angle and height on the go. I also use my setup now as a sit stand setup because of the flexibility this gives. Especially when I did not want to invest too much at the moment in a sit stand table.
The price is a little high when compared to other alternatives but then, I find this one worth the extra buck as it gives me the flexibility and asthetics I desire in my setup.
I could not recommend it more. Just go for it.
A good quality dual monitor arm. The instruction delivered with it are poor so takes some time to set up whilst you work it out. There’s alot of assumptions that you know how these things operate. Anyway after a little frustration I got it sorted and it works a treat.
This dual monitor is just perfect! Every component is super heavy so the monitor is super sturdy on this stand and I don’t have to worry about the monitor just collapsing on me. By placing the monitor on the stand, it is at my eye level so my neck is always straight and I wouldn’t get any backaches from looking down. The best part is that I can adjust where the monitor is facing with the 180 degrees spin it offers, I can even see the monitor when I am cooking food in the kitchen. This is just so good that I will be investing another monitor just so the 2 arm will be filled.
I needed an upgrade to my computer set up, so I got these HumanTeck Dual Monitor Arms. They have a very unique design, as I can now easily and smoothly move my screens around, unlike most stands which have very limited mobility. The arms can swivel and tilt at multiple angles, which gives me the opportunity to adjust to my specific preference, whether I am working alone or with company. It’s great for my set up, as I can now work a lot more comfortably as well. They were easy to install as well, as they’re simply placed on the edge of my table then tightened into place using the clamp. However, they can also be installed via grommet mount. Along with the arms being strong, both installation methods are stable and secure, which reassures me that my screens are safe when moving them about. These are fantastic monitor arms and I highly recommend. Happy customer!
Quick and easy to set up and can easily hold the weight of two 32″ monitors which is ideal for my editing setup. It doesn’t leave marks on the monitors or on my desk and is very reasonably priced.
The HumanTeck Dual Monitor Arms took about 20 minutes to assemble. The weight and quality of the materials used is reflected in the price. I used the clamp to desk option rather than the grommet alternative.
Included are three different size Allen keys. There is also a tool-storage plastic bracket that attaches to the back of the clamp. It is a nice touch that you can store the tools easily if you need to make any further adjustments.
There are a number of advantages of using the dual arms over the standard stands the come supplied with each monitor. You get more of your desk surface area back as the desk clamp takes up so little desk space compared to the two individual stands. Another benefit is that these arms have a much higher vertical reach. By having the screens higher means that you can look more directly at the screens rather than tilting your head downwards. I found this much more comfortable to use as there was less strain on my neck.
The arms have a cable management system built into them. By hiding the cables in the arms, it gives a much neater finish to your installation.
So far so good. The arms have supported both screens and have not dropped the position. Highly recommended.