How to Use:

1.Charging Instructions: After inserting the charging head into the charging port of the charging base, the whale Bottom induction point coincides with the charging contact point of the charging base. The red light flashes like a breath light indicates that the device is being charged . The red light goes out when it is fully charged .

During charging, long touch for 2 seconds to turn off the breathing light, short touch to turn on the breathing light.

2. Night Light Mode: The LED night light can be adjusted, control mode as below:

1st Touch—Turn on, long bright with Red light

2st Touch—Change to Blue light

3st Touch—Change to Green light

4st Touch—Change to Purple light

5st Touch—Several colors flash alternately quickly

6st Touch—Several colors flash slowly alternately

7st Touch—Turn off the night light .

QA:

1、Q: Why is the indicator light not on when I place the whale bath toy on the charging base during charging?

A: If the battery is completely drained, there won’t be an indicator light during charging. Please be patient and continue charging for a while. Then, pick up the whale and place it back on the charging base. The charging indicator light should illuminate at that point.

2、Q: Why did the whale spray toy suddenly stop spraying water?

A: It’s possible that there is air trapped in the water passage. You can try submerging the whale spray toy in water and then lifting it up and giving it a shake. This will help remove the trapped air and allow the toy to resume spraying water.

If the whale does not spray water and there is no working sound from the motor, and the light does not illuminate by touching the switch bit, please charge it first and wait for about 5 minutes to see if the light will come on, and it takes about 36 minutes to fully charge it. （If you have tried all above methods and still can’t work, please feel free to contact, we will provide you with the best after-sales service.）

3、Q: Why is the red light flashing continuously?

A: This indicates low battery power. Please recharge the whale toy by connecting it to the charger.

4、Q: Why did the Whale not stop working immediately when I took it out of the water?

A: It is due to the sensor still detects water on the bottom of the product, you can try to wipe it dry or place it on the charging base for resetting after wiping the whale dry.