Noctua NM-M1-MP83, CPU Cooler Mounting-Kit for AMD AM5/AM4
Noctua NM-M1-MP83, CPU Cooler Mounting-Kit for AMD AM5/AM4 and Intel LGA1851/LGA1700/LGA12
For Noctua coolers with 83mm mounting pitch
The NM-M1-MP83 kit is compatible with a wide range of Noctua CPU coolers that use 83mm mounting pitch, whereas heatsinks with 78mm mounting pitch must use the MP78 version. Please refer to our detailed compatibility information to check which kit is right for your cooler.
Multi-socket support
The NM-M1 sets are Noctua’s most comprehensive multi-socket mounting-kits today: Supporting AMD AM5 and AM4 as well as Intel LGA1851, LGA1700, LGA1200, LGA1151, LGA1150, LGA1155 and LGA1156, it’s the ultimate kit for a wide range of upgrading or switching scenarios.
Offset mounting option for AMD AM5
The NM-M1 includes Noctua’s offset mounting bars for AM5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact pressure right above the Core Complex Die(s). This improved contact exactly at the processor’s hotspot can significantly reduce CPU temperatures with typical improvements in the range of 1-3°C.
NM-SD1 magnetic tip screwdriver
The NM-M1 sets include Noctua’s NM-SD1 Torx T20 head screwdriver that is ideal for all the screws of the kit. Thanks to its magnetic tip and the 150mm long shaft, even remote screws in tightly packed environments such as ITX or HTPC builds are easy to handle without dropping.
| Socket Compatibility: | Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 and AMD AM5, AM4 |
| Scope of Delivery | NM-M1-MP83 SecuFirm2+ Torx-based mounting kit, NM-SD1 Torx T20 screwdriver |
| Cooler Compatibility: | NH-D15 (SE-AM4, chromax.black), NH-D15S (chromax.black), NH-D14 (SE2011), NH-D9L, NH-C14, NH-C14S, NH-C12P (SE14), NH-L12, NH-U12, NH-U12F, NH-U12P (SE1366, SE2), NH-U9, NH-U9F, NH-U9B (SE2), NH-L9x65 (SE-AM4), NH-P1 |
| Caution: | Please note that the NM-M1-MP83 is only compatible with heatsinks that have 83mm mounting pitch (see detailed compatibility information) and that the NM-M1-MP78 kit must be used for heatsinks with 78mm mounting pitch. |
 |  |  |  | |
|---|---|---|---|---|
| Socket Compatibility | Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 and AMD AM5, AM4 | Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 and AMD AM5, AM4 | Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 and AMD AM5, AM4 | Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 and AMD AM5, AM4 |
| Cooler Compatibility | 78mm mounting pitch | 83mm mounting pitch | 78mm mounting pitch | 83mm mounting pitch |
| Colour | Silver | Silver | Black | Black |
| Weight: | 340 g |
| Dimensions: | 4 x 4 x 1 cm; 340 Grams |
| Model: | NM-M1-MP83 |
| Part: | NM-M1-MP83 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Noctua |
| Dimensions: | 4 x 4 x 1 cm; 340 Grams |
Produkten i sig r toppen.
Dock r Amazons “packning” under all kritik.
Fick produkten skickad i produktkartongen och tejpning, s nr jag hmta ut ordern hos mitt ombud var frpackningen halvt ppen och jag kunde skaka ur innehllet.
il kit serve per avere le viti torx ed il cacciavite torx. Non detto che nel kit ci siano anche le staffe che sono necessarie alla stostituzione ma se uno deve solo prendere le viti e staffe torx ed il cacciavite va benissimo.
SE invece uno lo vuole usare come kit completo di sostituzione allora va scelto il modello esatto in base al socke
Ottimo kit per nh d15 che mi stato regalato da un mio amico. completo disponibile tutti i supporti, per Intel e amd. Per amd ha anche il supporto che fa calare la temperatura della CPU di un paio di gradi.
I used a back plate , lga 1700, from a deep cool aio, i used on an amd chip, to mount an lga 1151 ek aio to an lga 1700 socket over an i7 14700k. Didn’t need to but I used the hex heads from this to tighten it down. Spare parts. Idles around ~30ish. Thanks