2 Way Hose Manifold Splitter Brass Garden Outside Tap

2 Way Hose Manifold Splitter Brass Garden Outside Tap Splitter

2 Way Hose Manifold Splitter Brass Garden Outside Tap Splitter,3/4″ Tap Adapter Hose Pipe Tap Splitter Outdoor,Dual tap Connection 2 Ports with On/Off Valve with 2 * 3/4″inch Quick Connecto


124523


Weight: 350 g
Size: The two way hose connector is a standard 3/4 inch accessory.
Dimensions: 10 x 5 x 10 cm; 350 g
Model: Xpendhoze123
Part: 123
Colour: Yellow
Pack Quantity: 3
Batteries Required: No
Batteries Included: No
Manufacture: Xpendhoze
Dimensions: 10 x 5 x 10 cm; 350 g
Quantity: 3
Size: The two way hose connector is a standard 3/4 inch accessory.

5 Responses

  1. Anonymous says:

     United Kingdom

    Having installed and used this I need to reduce the rating to 4. The actual fitting is very good and I am pleased with it but the connectors provided to attach a hose are a little shorter than standard. This means that, although you can fit a hose, it doesn’t feel secure and could detach. However, other connectors from companies like Hozelock fit the splitter allowing it to be used with various attachments.

  2. Anonymous says:

     United Kingdom

    I’m very pleased with my purchase, not sure if it would leak, very quick delivery all arrived in a box, all parts were in good condition, assembled finger tight, with gaskets and thread tape provided, connected up hoses, and no leaks at all, great value for money, well worth it, thank you.

  3. GTG says:

     United Kingdom

    I have had several plastic Y hose connectors for my garden tap, but they have all had quite a short life without cracking. This one seems stronger and the fit seems tighterr – no leaks. The lever controls are particularly efficient.

  4. Anonymous says:

     United Kingdom

    A really well made garden hose splitter , its plated and manufactured to a good standard.

    No leaks as of yet once fitted altough i have found that the little inline taps of this design do tend to leak after a while on most similar splitters ive had so it will be interesting to see how this holds up over time.

    Includes all you need to connect two hosepipes including the push fit connectors and some PTFE plumbers tape.

    Price isnt too bad although not much in it between DIY huts and this.

  5. Anonymous says:

     United Kingdom

    i needed to run two hosepipes from one outside garden tap and this splitter did the job nicely.Made of brass it should last for years unlike the plastic ones I have had in the past.It fitted my tap and existing hose fittings perfectly. Thoughtfully it came with a small roll of PTFE tape for sealing the threads and two spare sealing washers and after fitting it there were no leaks at all.The two valves made it easy to adjust the water flow . I can control each outlet independently ,once again there were no drips or leaks.Its well engineered,will not rust and performed perfectly.I recommend it.

    5.0 out of 5 stars Rustproof sturdy Tap Splitter.