GAMDIAS Gaming PC Case, ATX Mid Tower Computer Case
GAMDIAS Gaming PC Case, ATX Mid Tower Computer Case, Tool-free Side Tempered Glass Panel, High Airflow Gradient Mesh Front Panel, Pre-install 3 x 120 mm FRGB Fan, Black, AURA GC7
GAMDIAS Gaming PC Case, ATX Mid Tower Computer Case, Tool-free Side Tempered Glass Panel, High Airflow Gradient Mesh Front Panel, Pre-install 3 x 120 mm FRGB Fan, Black, AURA GC7
I appreciate that the door on the side is glass instead of acrylic, so much harder to scratch and easier to keep clean. The glass is held on with four screws, which is a little tedious to take on and off, so definitely finish your build before you put it on. This chassis didn’t have enough space for the radiator I was going to use, so I had to pick a normal air-to-air cooler. Overall, I think this is a nice case, as long as rainbow LED colors don’t make you upset.
You can clearly tell the style it’s mimicing but at almost half the price of the branded model this case is a nice one.
The only downside to these cases is the metal used is solid but could be bent if not careful. It’s not flimsy but you will notice the quality of metal is cheap.
Wire management requires a bit of finesse but that will depend with how many drivers or connections you use. Most cases will require this.
The price I paid I knew what to expect and honestly, is worth it. It looks great and functions very well.
The only thing I’d change are the fans as they use molex pins but handy to have until I replace them.
Was looking to replace my larger tower,found this thought it looked cool.
The fans are static RGB no control,may need to replace if wanting the control other than that they work as intended
For the price, this is actually a pretty nice case. I moved my current rig into it, and here’s the pros and cons I identified:
Pros:
– Looks nice, regardless of the actual quality of the materials
– Tempered glass side panel
– Very lightweight
– Fairly compact, which is nice as long as you confirm your GPU will fit inside (my RX 6800 barely fits)
– Decently sized space behind the motherboard tray for cable management
Cons:
– Metal for the case is pretty thin, feels cheap when working with it
– Fans use 4-pin molex connectors, so no speed control and no RGB control. I swapped them out for other ones that I can connect directly to my motherboard
– SSD mounts are in a sort-of inconvenient location, I had to wrangle the power and SATA cables a bit to get them into both my SSDs. There is a removable 3.5 inch drive bay down by the power supply I could have used instead (with a 3.5 to 2.5 inch adapter) but it works fine as it is
– Drive bay is located behind the power supply in a spot that could interfere with some power supplies. Mine barely fit without removing the drive bay, any longer and the cables would have been kinked
Overall it’s a pretty nice case at a price of $60, though I would still recommend shopping around to see if any others are a better fit for your build. And I wouldn’t suggest buying this for the RGB, unless you really want it at a low price point.
Case is nice, no complaints there. Maybe I read dimensions wrong (which is my fault) but it was a little smaller than anticipated. Thankfully this is just for the spare pc in my room. Even though it does fit an ATX motherboard, with everything else in it, the cable management was a little difficult. I did also swap out 2 of the front fans with my own since because I use fan hub controller for all my fans to sync the RGB. So that hub controller did also take space in the back and made it hard to close the back of the pc. If you’re using an ATX motherboard and CPU air cooler like I did (see picture) you want have room to put two fans at the top. I would recommend this for a super budget build.
Colors on the Gan don’t move or change AT ALL. What you see is what you get.
Overall great case for the price point. Liked it in a flip, but due to the fixed rgb, I probably won’t purchase again.
This is great case! Solid materials. Very aesthetically pleasing and very simple to build in. I did not expect my EATX motherboard to fit in here.
I know there’s not alot of reviews on this but trust me, worth the price.