Outsunny 3 Pieces PE Rattan Patio Lounge Chair Set, Outdoor

Outsunny 3 Pieces PE Rattan Patio Lounge Chair Set

Outsunny 3 Pieces PE Rattan Patio Lounge Chair Set, Outdoor Recliner Lounge Chairs with Wheels, for Outside with Cushions, Headrest, Coffee Table for Garden, Poolside, Black


From the brand

藤编躺床outsunnyOutsunny 2 Seater Assembled Garden Patio Outdoor Rattan Furniture Sofa Sun Lounger Daybed with Fi...Outsunny PE Rattan Lounge Set, 5 Pieces Patio Conversation Furniture Set, Garden Round Sofa Bed w...Outsunny 2 Seater Assembled Garden Patio Outdoor Rattan Furniture Sofa Sun Lounger Daybed with Fi...Outsunny 3 Pieces Patio Lounge Chair Set, Garden Wicker Wheeling Recliner Outdoor Daybed, PE Ratt...

Rattan Lounger Set



Dimensions: 200 x 73 x 103 cm; 17 kg
Model: UK862-010BK0331
Part: UK862-010BK0331
Manufacture: Sold by MHSTAR
Dimensions: 200 x 73 x 103 cm; 17 kg

4 Responses

  1. Anonymous says:

     United Kingdom

    Very nice comfortable garden loungers. Quite a bit of work to put together but the instructions and assembly kit were easily identifiable and straightforward.
    Just remember lay everything out in order before you start your assembly and you can’t go wrong.

  2. Anonymous says:

     United Kingdom

    My husband took over 4 hours to put these together you get 2 boxes as the table and glass is in one of the boxes with 1 lounger. the holes don’t all match up the bolts are difficult to tighten up with the tools provided but they look great once we found some extra bolts at home we managed to finish to table. They feel comfortable the cushions as a good thickness and they are a bluey grey not a full grey I am surprised my husband finished them he wasn’t happy with the process but I helped with the second one. so I would recommend a 2 person construction.delivery in the time scale but slow at the end of the expected date I was to be away when the delivery was due so I contacted the delivery company and was able to rearrange to date for when I came home, that was very helpful

  3. Anonymous says:

     United Kingdom

    Golden Review Award: 4 From Our UsersSo, flat pack arrived in 2 boxes. Instructions were quite easy to follow. I have 2 pieces of advice. All the screws washers etc are on cardboard. So I would advise the assembler to use a Stanley knife to carefully cut round the screws so you know what letter they are. If you destroy the cardboard, you will not complete the assembly. Secondly, make sure the holes are perfectly aligned and take your time getting the thread right. Otherwise you will cross thread the screws. I had to buy a couple of replacements as I cross threaded a couple. The screws are not very resistant to cross threading. I would have given it 5 * if better quality screws are provided. Do not use power tools as you need to feel the threading.
    But once assembled, I am very pleased with the 2 chairs and table with nice comfy cushions.

  4. Anonymous says:

     United Kingdom

    Golden Review Award: 14 From Our UsersI purchased this End of January 2022 when it was cold outside so the price at 259.00 was worth a punt after reading the other reviews on how difficult it was to assemble and possibly bolts and instructions being missing.

    Note take a photograph of the nuts and screws before you start as you have to destroy the card to remove them. I have also added photographs of the instructions in case anyone else’s arrives and they are missing.

    My husband and I thought in the start we would have a race on who could assemble one quicker which rapidly put me in the lead as of course he went looking for power tools to do the job. Note to future assemblers this is not a job for power tools. You get basic caveman tools in the set for assembly and we mainly used those but an Alan key screwdriver will make it a ton quicker and if you have an ikea Alan key kicking about this will be your best tool.

    We were both motoring along until it came to step 5 and 6 where we decided to join forces and work together (risking the costly divorce warned by another reviewer)

    At this point ignore the instructions. The first thing to do is screw the bolts into the nuts to remove the excess coating on the screws use some lubricant if you have some we used cooking oil. When doing this you can keep a note of the odd angles that the nuts have been welded on at.

    We tried 3 or 4 times and failed to do step 5 before step 6 then ignored it. I have attached a picture of the order we put the screws in. This leaves you being able to flex the larger section easily to put in the rest of the screws.

    Once we did that on the first one we flew through the other side and repeated the process on the second lounger.

    The table we did the same kind of thing, removed the excess coating by screwing them in and removing but only located them in the holes and tightened them all once all screws were lightly located.

    I hope this helps someone else.

    All in all a very happy with them. Especially for the price of similar products.

    4.0 out of 5 stars Great value a complete Cow to assemble Until we ignored instructions.