UNBREAKcable AirTag Holder[4 Pack], IPX8 Waterproof AirTag
![UNBREAKcable AirTag Holder[4 Pack]](https://k4s.uk/posts/wp-content/uploads/2024/04/41h-Pnsn2dL.jpg)
UNBREAKcable AirTag Holder[4 Pack], IPX8 Waterproof AirTag Case Tracker with 3M Adhesive Sticker, Screw Top Design, Protective Airtag Cover for Car, Bike, Luggage, Remote Control (Translucent Black)
I used these AirTag holders on various items including my bike and luggage. The adhesive is strong, adhering securely to different surfaces. I appreciated the discreet design — they don’t draw attention to themselves as tracking devices. The waterproof feature came in handy during a rainy bike trip, protecting the AirTag effectively. Installation was simple, though ensuring a clean surface before applying is key. Their durability over time has been impressive, showing no signs of wear.
I needed a way to securely attach my tracking device to various items. This holder’s adhesive is remarkably strong – it stayed firmly attached to my bike and luggage during extensive travel. The waterproof feature was a plus, especially during unpredictable weather. It’s discreet, doesn’t draw attention, and the protective case seems durable. Installation was a quick process, and it hasn’t shown any signs of wear so far.
These things look tough, I’ve tried putting them underwater, they seem water proof, I can’t speak for the stickiness as I don’t think I’d dare stick them on a bike or outside of a car, for fear of them falling off, but I’d have no fear of damage from someone stepping on them for example. if you want something safe and water tight, perhaps even just to hide the appearance of the air tags, these would do a great job I have no doubt. they are considerably bigger than the airtags themselves which need not be a disadvantage in most uses
My experience with these AirTag cases has been quite practical. The adhesive is robust, sticking firmly to various surfaces. I attached one to my bike, and it’s held up remarkably well, even after several rough rides. The case itself is sturdy and discreet, blending seamlessly with whatever it’s attached to. The waterproof feature adds a layer of security, especially when I’m out in unpredictable weather. However, I did find the installation process a bit fiddly, particularly when trying to align the AirTag perfectly in the case.
We use Airtags a lot, mostly on luggage but also for some other applications.
These are fairly chunky plastic containers, in two parts – a back part with a sticky 3M pad on it and a front part that screws onto the back part. The Airtag goes between the two.
It’s a great idea, but it only works if the thing one is sticking it to is absolutely flat and smooth. We had a lot of trouble making them fit inside our luggage which all has curves and dimples. But I can see that this would work really well for folks who want to stick it to smooth/flat surfaces.
Recommended if you need to stick Airtags to smooth/flat surfaces 🙂
This is a super simple way to attach an airtag to something, which is both discrete, and secure.
I’ve used it to hide one on on my car, in a place which makes it open to the air for the radio signal, but otherwise discrete and out of sight to those who don’t know it’s there. This works nicely as both a bit of added security, and an easy way to locate the car in an open car park or something (assuming you don’t use carplay in the car, as that’ll log it to your phone anyway!).
It’s waterproof and the sticky pad is super strong so it should stand the test of time.
Very handy and definitely recommended to anyone using AirTags..
This pack of 4 airtag holders are a bit on the pricey side, however they are well made, water tight and can be stuck to most hard surfaces.
Transmission of signal didn’t seem affected by using this holder and it’s small enough to allow placement pretty much anywhere.
Overall it’s not cheap at 20, but if you want to hide this inside your car, or attach to your bike, this should work well.
These tags holders/cases are held in place by 3m tape and so far so good – I’m using these on our bikes and having just got back from a very wet mountain biking, they were covered in mud yet still holding very firmly and working fine. My partner tried removing one and it looked like he’ll be taking the paint with it. So I am really pleased with how well they hold in place.
Really robust, simple yet effective and excellent value for money. Highly recommended.
These are very simple, you unscrew them into two parts, insert the tag and screw back together.
You really couldn’t make a more secure and simple container that keeps things so compact and easily hidden.
The choice of 3M VHB tapes is great, this tape is incredibly good at keeping things in place. Just clean the surface you want to attach to with one of the included wipes, give it a min to dry and stick it.
I shall be using one on my motorcycle and two on cars. The fourth will probably sit inside my laptop bag somewhere.
I really like the idea of these, they take hiding and protecting the tags to another level. Superb.
These air tag holders are super strong. They feel very well made with quality hard plastic. They create a good waterproof seal around the airtag and the adhesive sticks really well. Make sure you lined it up where you want it before sticking it down because getting it off in the future is going to be a task (which is exactly what you want).
This is clever and so worth while, we know the AirTags are a cracking idea but how to attach them to some items can be a bit of a challenge.
As described on the page, there are so many options and I’ve already hidden a tag in the van and another in the car and just considering the dog’s collar as it makes the tag water proof
Doesn’t affect the range of the airtag and especially for luggage (my fav usage) being able to stick to the outside of the case just improves the signal for that time when you need to go hunting for the case.
Easy to fit and nice and sturdy a clever idea with a super sticky mount
Very clever and I like them
Unlike my other AirTag holders, which go onto key rings, luggage, etc, these are meant to be fixed in place to give a secure, waterproof home to your Tag.
They fix in place using 3M double sided pads which will stick to just about any surface, so you can hide an AirTag on your car, bike, or anything you want to keep track of, knowing they’re secure and protected.
Strong and sturdy screw top holds the disc in place but is easy to unscrew when you need to change batteries or remove the Tag.
They come with a small cleaning kit to make sure you have a good surface to stick to, plus simple instructions on use, which most people won’t really need!
At 5 each these are will made, they look and feel super strong and secure. The internal design ensures they stay nice and dry inside. The cap is easy to remove when you need to get in to it. All you need is a nice clean surface to stick to or stick the thing to a strong magnet and then you have it ready to stick under a vehicle or heavy plant equipment. Signal is still good for the AirTag and I’m happy with the overall design and function of these. Easy recommendatio
If you need to attach an Apple tag to anything then these will certainly do the job for you.
they are a little obvious for placing on tools that people ‘forget’ to give back but ideal for larger items or vehicles or bicycles they would be perfect.
You simply fit your apple tag into the unit and screw the top on, clean the surface you wish to attach it too then peel over the protective cover from the double side tape and apply.
Obviously the duration of the fitting will depend on the surface you are applying too, but a clean surface should give you a good connection.
I’ve tested it on a wheel barrow and in my car and both connected well.
If you have a need to fix some Apple tag to a device, or items then this will do the job perfectly well.
4No AirTag holders with 3M double sided tape. They are a substantial case, suitable to protect the AirTags.
The enclosure includes a sealed washer so these are okay to take on the elements. If Sticking the case – it needs to be a cleaned flat area.
These are well made and fit for purpose!!
I recommend this product!
Delivered fast with Amazon Prime.
The Airtag is being used for so many purposes these days, here I thought what if I fit one to my car, but the range is greatly reduced if placed inside the car and I did not want it easily found. So I needed something that would encapsulate the AirTag and to keep it safe whilst being able to fit it to my car. I found that there is plenty of room on the inside of the fuel flap without out it pressing against or stopping any of the mechanics.
I cleaned the area in readiness for attaching the Airtag holder, then attached it, I only did so lightly so that I could move it if needed, but the adhesive took straight away and it was not going anywhere.
The design is simple enough and is marketed as unbreakable and time will tell, but looks to be able to handle the job.
These arrived well packaged with each item in its own tray. The plastic construction feels strong and good quality with a simple but effective design.
You simply unscrew them, insert the air tag and screw it back together it’s that simple. The air tag fits really well and there is a rubber seal in the lid to prevent water ingress which is great. I put one inside a glass of water for an hour and there was no water inside.
All 4 have adhesive tape already applied which is the only method to attach them (no ringlets or other options). I will point out this is quality 3m tape and VHB (very high bond) which I have used before and is very strong when applied correctly.
These are well made, strong, waterproof and easy to attach – highly recommended.