HCJYC All in One – Protective Case for Flipper Zero
HCJYC All in One – Protective Case for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board with GPIO Dust Plug – Green Se
HCJYC All in One – Protective Case for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board with GPIO Dust Plug – Green Se
The case is nice and soft, the strap is helpful, but the hardcover case I’ll probably never use though you may. It comes with a protector case for the wifi card as well as either a glass or a TPU screen protector that you can choose which you prefer.
As described and excellent quality product for flipper zero case is of high quality and really does protect the flipper zero and all the other bits that comes with it including a 64GB sd card will come pretty useful shortly. Highly recommended seller.
I really love this case! It’s excellent in feel and compactness. It also fits my F0+VGM without an issue. I also love the fact that I can pack around everything I need in a single case.
I do not own the wifi dev board, so I haven’t been able to use the protective case that cane with this set, but the quality is very nice and sturdy.
I’d recommend this to anyone who wants a convenient protective case for their F0.
This is a really good case a little on the larger side if you have a lot of accessories you want to keep in easy reach of your Flipper. The little wifi board is also a fun little addition to tinker with, and even though it has 3d printer parts, the quality of the print and the strength of them is some of the best I’ve seen.
I just got myself a Flipper Zero, and the first thing I thought about was protecting it. This pack comes with everything I needed. A case for the Flipper itself, dust protection USB-C , SD Card slot, and GPIO port. Not only that, but you can choose between two screen protector types. I went with the TPU over glass. Also, the wrist straps are *CLUTCH*. I used the longer one for the Flipper and strung it through the USB-C dust cover plug. I did not use the WiFi module case since I don’t have one (yet). And the protective zipper case holds it all. All-in-all I would stay this is a good deal at 40 bucks.
This is a nice kit that has everything I needed to keep my FZ protected while transporting around with me. The case itself is black in color and is hard enough to help against damage if dropped. It came with a case for my wifi device board and is put together that allows me to use it without taking it out. Included in the kit were 2 screen protectors, one soft and one hard. It is well made and is comparable to the name brand case that is available. The main difference is the price. This is cheaper.
This Case Set for Flipper Zero is a comprehensive solution for tech enthusiasts who want to keep their devices safe while on the go with some side perks as well. The case set, catches the eye and also promises durability and a snug fit for all Flipper Zero modifications and the device itself.
One of the standout features of this case set is its tool-free assembly. This design choice is a nod to the DIY spirit of the Flipper Zero community, allowing for quick and hassle-free access to the device. Whether you’re a seasoned tinkerer or new to the world of modular gadgets, the ease of use is a significant plus.
The inclusion of a 64GB Micro SD Card is a thoughtful addition, providing ample storage for all your projects, apps and experiments. The hand straps and screen protectors included in the set ensure that your device is not only protected from physical damage but also remains easily accessible and ready for action.
This set was a well-thought-out accessory pack that complements the Flipper Zero perfectly. It’s clear that the designers have considered the needs of their audience, delivering a product that’s as functional as it is stylish.
This case set will ensure that your device is always ready and protected. I highly recommend it. It’s a small investment to make, but well worth it.
I got this product because I have a Flipper Zero. First, it comes with a firm-shell zippered case for all of the kit and your Zero. Next, it has a rubber-like skin to protect your Zero. Uniquely as you can see in the pictures, it comes with a set of strips that act like dust plugs in the case, so for example if you’re not using the pinouts on top, you won’t get junk or rain in the in the field. Likewise if you’re going to use an expansion module, it comes with printed cases for that too. The small packet-looking things in the photos are Zero screen protectors. It comes in with straps for the Zero, either one big enough for your wrist, or a smaller one to clip onto for basic carry or securing on another object through the locking slider. Finally this kit has a 64 Gbyte micro-SD card and a USB-C cable for charging or data.
All of the provided items work quite well for the intended purposes, and as a new Zero owner that is excited about using it, this gives me a great start to keep everything in good shape for many years to come. Recommended.
So ive got a few flipper accessories before none were this complete. This has EVRRYTHING
A sleek nice feeling black case, dust covers, both soft and hard screen protectors , a wifi devboard, a case. Perhaps the most notable thing an actual memory card. I’m VERY happy. Oh also tbis is the first time I can use my Devboard and flipper cases BOTH on while still havjng a connection. With My previous case is I would have to take off the flipper case to work with the dev board, but this one is thin enough to work. Perhaps a few minor notes and definitely not in any way deal breakers. But 1, For some bizarre reason the charge port cover is gray and not black and I don’t really know why when everything else is black. So I found that a little strange.. The other thing is really a complaint with all cases I’ve ever had but I don’t know why the dust covers always go on the inside of the case and no case is made for them to go on the outside which is a little bit annoying because you have to take off the case to remove the dust covers to insert The memory card or the dev board. And I really wish somebody would come up with a solution to this. But besides those two little things, this collection is most definitely amazing and perfect and I definitely recommended to anyone who gets a flipper because this is the perfect starter kit.
Note – for those not reading the product description, this is just the cases, the FZ and the dev board are NOT included
I already have 2 other silicone sleeves for my FZ (white and orange), but this one is nice as it’s black, so makes it a little less conspicuous. The case for the dev board fits well, and even comes with little silicone protectors for the buttons and the USB-C port (though I didn’t realize what they were when I first snapped it together, so had to pry it apart again – the only docs are for the FZ case and the screen protectors).
The hard case is on the big size for a FZ, it’s definitely not a custom case and looks like a lot of the 2.5″ drive cases outs there (elastic strap on one side and mesh pocket covering 1/2 on the other side).
The port protectors for the FZ silicone sleeve are a little difficult to put on and off, so I’m not sure I’ll leave them on.
The kit also comes with a protective elements for the dev board when it is not installed to protect the pins. It’s substantial, so I don’t think anything will happen to the pins.
Overall, a decent value for the cost, if you don’t already have most of the major elements already. But if you have some of them, it’s more cost effective to buy just what you need.
Note that the dev board does work with the FZ with the silicone case installed, but not if you install it straight onto the FZ. You sort of push it in and then tilt it a little at the end for it to make a solid connection and remain in place. you aren’t flexing the pins or bending anything that I can tell.
The case for the esp32 wifi module is good for keeping it safe while on the go. It has the silicone button covers, a silicone cover to protect the connection pins, and of course the stylish green case. I don’t know if it’s really necessary to have the cutout for the esp32 module itself as it allows for dirt and debris to potentially get in, but it looks kind of cool and definitely won’t block any signals.
The silicone sleeve for the flipper is pretty nice since it has the gpio labeled on it. There are covers that can slip in to protect the slot for the mini SD card and gpio pins, but I would have liked to see one to cover the USB charging port.
It also comes with 3 screen protectors one that’s tempered glass and 2 TPU film covers, which is nice but one of those would be better if it were for protecting the IR sensor.
For the price I feel like a cover for the USB port and IR sensor should have been included.
The HCJYC All-in-One Protective Case Set for Flipper Zero & Wi-Fi Dev Board is well-made, with a silicone skin that fits nicely around the device. Though it lacks a protective ridge on the front, it compensates by providing more comprehensive coverage. The inclusion of covers for the SD card and dev board is a thoughtful touch, keeping everything together. The quality is high, and it feels good to the touch. My only concern is the value, as the price seems a bit steep for what’s included. Despite this, the kit does a good job overall and remains a solid choice.
This flipper zero caring case in protection bundle is superb. It comes with everything you need to install. The included screen protectors, and the cases are really easy to put on your device. The dust caps included are OK. I would prefer something that was a little more built in with the main case as I do see myself losing the smaller pieces in the near future. Good price.