Lay-Z-Spa BWA0010 Vinyl Repair Kit for Hot Tubs, Inflatable
Lay-Z-Spa BWA0010 Vinyl Repair Kit for Hot Tubs, Inflatable Spas and Above Ground Pools (Repair Patches, Glue and Application Tool)
60ml Glue
Application Tool
1 x Rectangular Patch
9 x Circular Patches (3 Different Sizes)
| Dimensions: | 10 x 4 x 10 cm; 120 g |
| Model: | BWA0010 |
| Part: | BWA0010 |
| Manufacture: | Lay-Z-Spa |
| Dimensions: | 10 x 4 x 10 cm; 120 g |
Had a tare where the cat had jumped up into the spa while cleaning it. I used the glue and patch, used a clamp to apply pressure overnight and it worked! Spar is still holding air well.
Had a small 5p size tear in the bottom of a Lazy Spa hot tub, normal bike puncture repairs didn’t work (just not robust enough and the repair doesn’t have the tire to hold it on. Used the larger patch of circa 3inch diameter, followed the instructions and then left it for a few hours, inflated by half then fully and it’s still up after a few days now with water in.
Our hot tub had managed to get two different holes in its side. Neither were huge but it meant it had become unusable.
Purchased this and followed the clear (if small) instructions and the repair was done in no time.
Quick, easy and effective. Exactly what I needed.
I purchased this kit to repair the drain plus at the base of a LazySpa Paris.
I was drainibg the tub for cleaning and refill and i pulled the drain tab the wrong way ripping it half out of the base. So, ordered this kit, selected a round patch, measured up and marked the hole. Cut the hole out. Applied the cement as per instructions and fitted the patch, used a bumb bell to push the plug down onto the new patch and left 24hours. Perfect seal, no leaks after 5 months, confident its going to hold. Very very happy.
Ordered based on reviews as my hotbtub was slowly deflating. I identified 2 areas that were possibly the culprits. As bubbles formed with spray Made sure area was well cleaned. And allowed to dry off then applied glue as needed I marked around the patch with pencil so could see was keeping glue in area needed. I applied patch and rubbed it in and left little bit weight on. Next day had fully cured. Pumped hot tub back up was no air leaks there. As before unfortunately It deflated more slowly upon taking advice I found where the motor was inside hot tub liner one of the plastic pipes had a very crack in. Couldn’t get spare and even though attempted fix no joy. Can’t fault this product as I worked a treat made sure area around patch was cleaned of the glue. So didn’t discolour it have put the rest of patches and glue away as have got new hot tub a lazy spa just in case