SUNLU PLA Plus 3D Printer Filament, 1.75mm PLA+ 3D Filament
SUNLU PLA Plus 3D Printer Filament, 1.75mm PLA+ 3D Filament for FDM 3D Printer & 3D Pens, Neatly Wound Filament, Strong and Toughness, Dimensional Accuracy +/- 0.02 mm, 1KG Spool(2.2 LBS), Gold
From the brand
Durable Nylon-Like Resin
| Weight: | 1 kg |
| Size: | 1kg 1.75mm PLA+ filament |
| Dimensions: | 20 x 6.4 x 20 cm; 1 kg |
| Brand: | SUNLU |
| Model: | SUNLU PLA+ 3D Filament |
| Colour: | 1kg-Gold |
| Pack Quantity: | 1 |
| Manufacture: | SUNLU |
| Dimensions: | 20 x 6.4 x 20 cm; 1 kg |
| Quantity: | 1 |
| Size: | 1kg 1.75mm PLA+ filament |
Purchased so I could print some Simpsons figures. Works good and not had any problems with it. It came with a plastic filament clip for holding the filament in place during storage which was a nice surprise.
A big fan of SUNLU PLA recently. A nice shade of red. Plastic spool is great so it can be used in my Bambu AMS. Really fed up of the limited choice of manufactures that are still producing plastic spools but thankfully I’m having great success with SUNLU PLA.
Prints at high speed, adheres to the bed well and prints in perfect quality. No stringing.
Would recommend.
Couldn’t get a replacement for my Bambu Labs filament as it was out of stock and wanted to start a print. Ordered this Green PLA+ try out and have not been disappointed. Worked well with the Bambu Basic PLA print profile. Very pleased with the purchase.
I have been using sunlu since forever. I like the quality of this filament. I bought the “wood” version to test. In fact, it is not wood, but a light brown PLA+ color. After printing, the product was still of high quality like other sunlu, but without the wood touch like, for example, AMOLEN Wood PLA.
Nevertheless, a successful purchase. I recommend.
(The first photo is Sunlu Wood, the second one is Sunlu and Amolen)
If you are having issues with jamming/clogging, poor adhesion, mid-print faults or ugly prints – this is the filament for you.
I have been reliably purchasing this again and again for various artistic and construction projects and I have not since had any of the aforementioned issues. I’ve tried this filament with Ender, Anycubic, and Elegoo printers and the end product is always great looking and pretty durable.
For cosplays, components, quick fix parts, and all other 3d printing needs, this filament is the one you should buy.
If you want a reliable PLA filament that delivers excellent print quality, Sunlu PLA+ is a top choice. It’s easy to print, with great bed adhesion and minimal stringing. The solid black color has a beautiful shiny finish, and the strong layer adhesion ensures a seamless print. No zits or blobs mar the surface. Overall, this is a very good filament that comes highly recommended for outstanding 3D printing results.
I have written other reviews for SUNLU printer filament, and I have always marked the very highly. This fibre continues to follow that high quality.
The filament never clogs or snags, it’s always wound onto the spool neatly, it adheres wonderfully to the Teflon/glass heated printer bed, it is never moisture contaminated, and it always gives me exceptional and crisp reliable 3D print quality.
I literally cannot think of a bad thing to say about it. It makes 3D printing remarkably pain-free!
Please excuse the dust in the photo. That is an early prototype that was in a draw. Not the best of photographs but one can see how crisp the print is.
Used on Bambu machines (A1/P1P) – This white is brighter than the eSun equivalent, and for what I use this has less stringing so I prefer it. I have taken a star off because I have to use adaptors with my equipment which can be frustrating, other than that, this is the go to filament for me.
So I ordered this to try it out. I have a Flashforge Adventurer 3 and I typically stick to their own brand of PLA, mostly because the built in spool holder only takes 500g spools and because I can be pretty sure their own filament will work well. Boy was I wrong.
Before this spool arrived I printed off a couple of Tush rollers to hold the spool externally because as me ruined above, these spools are too big for the Adventurer 3. The spool worked just fine on a pair of Tush rollers. No resistance all good.
I then ran a print using an old job stored on the printer. I have a little bunny rabbit print that I use as a benchmark, mostly because my youngest likes to get a new bunny rabbit when Daddy gets some new PLA but also because the model is tough enough to print that it challenges the printer but easy enough that I won’t get stuck in an infinite loop of troubleshooting that doesn’t matter because I never print anything that is insanely complicated or at the limits of 3D printing. I intentionally spend time making sure anything I print is oriented in a way that makes it easier or I modify it to make it less challenging.
Anyway, on to the PLA+…first print was perfect and I didn’t have to adjust anything. Print settings were 0.18mm layers, cooling off first layer, 60c bed (glass bed, I have the Pro model) and 220c nozzle. No raft. No brim.
I got a clean print, no stringing, perfect adhesion and no warping or layer issues. The final result was a sort of matte finish with a small amount of sheen.
I’ve printed with black PLA before and you typically get that shiny black drainpipe look but with this stuff, it’s quite tasteful. It’s not as flat as you’d expect though, definitely shiny but not overly shiny. Your prints won’t look cheap.
The stand out here though is the very low amount of stringing. It’s virtually none existent. There is a tiny bit of really fine stringing but it’s very easy to deal with after the print. Absolutely nowhere near the amount of stringing I usually see.
I think this brand might be my go to from now on. Good stuff.
In terms of toughness Vs standard PLA…my lad hasn’t snapped the ears off his bunny yet, which he usually manages within a few minutes. So I’m guessing this stuff is a lot tougher than Flashforge PLA.
I’ve since run off some other prints that I know to be quite weak with Flashforge PLA and so far they have proven to be a bit stiffer and less fragile. I’d place this stuff somewhere between standard PLA and ABS.
If you’re looking at this stuff and you’re like me and wondering if straying from your usual stuff is worth it, the answer is probably yes.
At this stage I don’t know how well the roll will keep, some other rolls from other brands have got brittle on me after a while, which is another reason I typically didn’t buy bigger spools.