CORSAIR 3500X ARGB Mid-Tower ATX PC Case – Panoramic
CORSAIR 3500X ARGB Mid-Tower ATX PC Case – Panoramic Tempered Glass – Reverse Connection Motherboard Compatible – 3x CORSAIR RS120 ARGB Fans Included – Black
From the brand
CORSAIR 3500X ARGB Mid-Tower ATX PC Case – Panoramic Tempered Glass – Reverse Connection Motherboard Compatible – 3x CORSAIR RS120 ARGB Fans Included – Black
El material me pareci de una calidad satisfactoria adems de que el espacio y la facilidad para retirar tanto los paneles laterales como el trasero hacen la instalacin de componentes muy sencilla. As mismo el que ya tenga incluidos 3 ventiladores ayuda a que la preocupacin por llenar los 10 espacios que tiene para estos sea bastante menor.
I really quite like this case for the most part. It comes with motherboard standoffs pre-installed, so it’s easy to mount the motherboard and screw it down. There are even holes in the back for motherboards with ports on the rear if you happen to have one. The back space for cable routing lets you keep your wiring mostly out of the way even with a standard motherboard though. It won’t hide them completely (as they still have to plug in!), but except for your GPU, you won’t have a ton of cables lacing through your whole case. There’s space in there for a couple of SSDs hidden nicely out of the way, too – and also maybe an HDD in theory, but I am not optimistic about how well it would fit (see below). The glass panels are beautifully clear, and though they tend to pick up fingerprints they clean off easily. I’m not really a fan of the little three-point shape they’ve decided to put everywhere for no clear reason, but it’s harmless. The case panels remove easily (maybe even a little too easily) from the front and both sides, and you get two USB-A and one USB-C port on the case itself.
However, if you plan on adding any additional PCI cards besides a graphics card, this might be inadequate if you have a modern GPU. A lot of the current-generation GPUs are absolutely gigantic, and this presents a bit of a problem with the raised spot for the PSU in the bottom of the case. If you have a big GPU as well as fans installed at the bottom, you may end up with basically only one PCI card slot anywhere remotely accessible, with all the others obstructed (and in my case, that one available slot is so close to the bottom of the PSU that I’m concerned installing anything would obstruct too much airflow). Also, the cable storage area behind the motherboard is VERY snug, particularly if you’re using a Shift PSU with the ports on the side, as they stick out almost directly into the panel. It took a bit of mashing to get all the cables to fit, which often has to be redone when removing and reattaching the panel. The resulting crowding around the bottom of the case can also make wiring in that area tricky.
I wouldn’t say it’s bad unto itself, but if you want to ensure you can make use of all your available PCI slots, especially if you plan to use all the available fan positions, I would suggest considering the 6500X case instead. It’s wider, but it provides more space in back for the cables and also allows the PSU to be moved behind the motherboard, so more space is available at the bottom. It’s fine for me as-is, but if I want to add any other PCI cards I may be in a bit of trouble.
If you opt for the version with RX120 fans included, you may want to make sure those match the fans you want to use for the rest of the case! Corsair AIO coolers may come with a different type of fan like the QX120 that might not match. You might not care, but if you want a uniform look (which seems likely if you’re buying a mostly-transparent case), it’s something to watch out for.
At the time of purchase, it was priced similar to a normal ATX case if you consider the additional cost of 3 aRGB fans. Very high quality IMO, all panels are tool less and fit like a glove. One small downside would be, the dust filter holes are massive. They might stop a fly but they really dont stop any fine dust particles. So if you have a dusty room, I would consider this. In my case, my room is relatively dust free and I dont mind cleaning it every once in a while so it hasnt been an issue. Temps are also good. All in all, would highly recommend
The case was very easy to disassemble and put back. While there are grooves and slots to manage cables, there might not be enough for the neatest of neat freaks (if this is you, consider the 6000D.) As a novice, it only took me 5 hours to disassemble my old and put it into this case. The aesthetics are very pleasing.
The iCUE Link Fans were plug and play with my pre-existing iCUE installation. The improved airflow also solved my overheating problems from my previous mATX case so I’m very happy. The box came with a QR code to Corsair’s online manual but it was intuitive enough that I never referred to it.
In the picture, I’ve deliberately turned off the RGB lighting on the Link fans because I’ve found that they have a different white balance and it’s a bit jarring compared to the rest of my setup.
The only true problem I had was that I had some overly thick HDMI/DP plugs, and use slot 1 for the GPU. There was a slight difficulty plugging the cables in. The easy way to solve that problem was to remove the plastic casing of the troublemaking plugs with a flathead.
Nulla da dire, la qualit di corsair si percepisce. L’unica cosa a cui bisogna stare attenti sono i pannelli di vetro: mettete una mano sotto quando aprite il case per proteggere il vetro o va per terra. L’airflow ottimo, in giochi come cyberpunk e ventole da 15 euro/set, 4070 super mi fa massimo 85 gradi. Lies of p o elden ring, 65 massimi. Top
This Mid-Tower ATX PC Case is an absolutely beautiful addition to my setup. The panoramic tempered glass showcases the interior perfectly, and the three included ARGB fans add a stunning light show to the build.
Unfortunately, the first case I received had a broken glass panel, which was disappointing. However, the seller resolved the issue quickly and sent a replacement in no time, which I really appreciated.
Overall, this case is a great choice if you’re looking for something both functional and visually striking. The quick resolution of the initial issue also speaks volumes about the quality of customer service. Highly recommended!
El diseo tanto visual como para la facilitacin del montaje es muy buena, las calidades de los materiales de la caja son de calidad.
Yo personalmente tengo que destacar el flujo de aire es muy bueno, compr la opcin con 3 ventiladores e instal a mayores 3 ventiladores de la refrigeracin lquida H150 y otros 3 ventiladores a mayores de Corsair tambin y las temperaturas son bastante buenas para una una RTX 3080 probndose sin hacer Undervolt y un 3700X y bajando revoluciones de ventiladores para bajar el ruido consigue excelentes temperaturas.
En definitiva si buscas calidad en los materiales de construccin y un buen rendimiento por el precio que ofrece frente a otras opciones sobre los 200 no tiene nada de desventaja ante estas.
Conforme a la description et du produit. Marque rpute dans le domaine informatique, reconnu pour ces mmoires vives, fan et botier, celui-ci et bien conu pour un air flow trs pens pour ce style agrable et pur. Possibilit d’activit ou non les led sur le botier via le logiciel Corsair, Gour Medium mais plus large que la dimension standard, elle permet de favoriser l’esace droit(gch) pour l’emplacement des cbles proprement. Plusieurs trou sont prvu pour le passage des cbles sur les dernire cartes mres de type ATX/MicroAtx
Perfektes Mid – Case!
Normale- und auch BTF – Mainboards passen. Das macht es zu einem idealen Case. Genug Airflow bietet es auch und man hat die Mglichkeit, die Graka, Vertikal einzubauen, mit einem seperaten erhltlichen Adapter. Anschluss mit bis zu 4 SSD’s an der Rckseite. Praktische Druckknpfe mit denen man smtliche Paneele abnehmen kann. Der Preis ist absolut angemessen. Wahlweise ohne oder mit ARGB oder als icue-Link erhltlich.
Got this case delivered as a replacement for my carbide case that I had and to be honest the build quality is pretty solid doesn’t flex when you remove the side and front panel like others do, plus there’s no screws to fasten it it just clicks in place same with the back and the top at the back of the case you can see there’s no drive cages as you can fit 1 hdd on the panel above the hub and a pair of 2.5in ssd on the reverse side.
The fans are pretty quiet and look good and same again they are pretty solid I have a mix of the qx & rx you get with the case & as you can see they work of the same hub but I will say this if you are going to fit more fans just remember that you may also have to order additional cables like ice had to so that I can fit the last 2 fans below the graphics card, you will also need to order a 90 degree 19pin USB adapter as you won’t be able to fit them due the the cable being pretty solid