Dash Cam Hardwire Kit, ACC Hardwire Kit for Dash Camera Type
Dash Cam Hardwire Kit, ACC Hardwire Kit for Dash Camera Type C 3-Lead Hard Wire Kit 12V-24V to 5V USB-C Hardwire Kit w/Low Voltage Protection 13ft Charger Power Cord for GPS Radar Detectors and More
Hidde Cables
Wire and hide the extra dash cam power charging cable, and connect it to the onboard dash cam or other devices, then the installation is completed.
I used this to fit my dashcam
It worked really well nice and was easy found a ground and made sure that was secure poped out the right fuse replaced with this and all was/is good thanks
Has all the bits you need. I hard wired it to a fuse that just comes on when the ignition is in but it could be wired to a fuse that’s always on as it has a features that turns off once the voltage goes down to less that 12v
I used this to hard wire a BESTSEE dashcam into a 2023 Dacia Duster. It works perfectly in this application. (I am not using the camera as a 24-hour sensor, so I cannot evaluate the kit’s low-voltage protection.)
I like the splittable +ve and -ve input cable strands -these make neat fuse box cabling easier than some of the alternatives. On the windscreen side, a right-angle USB-C connector would have been preferable, but the straight connector is OK.
Not cheap, but still recommended.
Great kit, especially how the fuse carrier allows you to ‘double up’ so you don’t need a spare slot. Just a shame I was sent micro usb instead of usb-c. Full refund given.
I’d previously powered my dash can through the 12v socket between the driver and passenger seat in my mk 7 Golf GTI but wanted to tidy this up with a permanent install.
Before attempting the install I watched a few YouTube videos on how best to fit this to my model of car.
On receiving the kit I found that the magnetic interference piece was missing so contacted the supplier who quickly replied and offered a partial refund with which I purchased my own.
The rest of the kit seems to be of very good quality, with various fuse types to connect to the fuse box.
I decided to attach to a fuse with a permanent power feed as my dash cam (Goluk T1) has a setting that automatically turns off the dash cam after the car has been stationary for 20 minutes and so far it has performed faultlesly.
I’m planning to test the Parking monitoring setting on my Goluk T1 dash cam soon which would have it looping video and saving clips when either the vibration or motion sensors are activated whilst parked. This will then test the hardwire kits function for turning off power to the dashcam before the car battery gets too drained to start the engine. I will update my review at a later date to confirm how this performs.
So far though really happy with my purchase, would have been 5 stars if the magnetic interference ring had been present and would have been less stars but for the suppliers quick reply and rectification of the issue.
I would recomend