This Universal-receiver is equipped with a potential-free relay-change-over contact. The supply voltage can amount to 12 till 24 V AC/DC.Selectable frequencies (433.62 and 434.22 MHz) together with a special transmission protocol lead to an extremely trouble-free control Coverage up to 1000 m depending on places are possible. A feedback signal/report is sent to the transmittor SHT-12 C4, so that user can identify whether the receiver was reachable. Receiver is suitable for switch, key and timer function (up to 60 min). Using multiple setting-possibilities, applications of all types, for example in the security and building technology or in other electronic machines can be found. For applications demanding a locally wired relay-control, a feeler can be connected.
The hard transmittor SHT-12 FS transmits with large range the switching signals from relay contacts, buttons or switches. This saves time and costs for the installation of control cables. It has 4 inputs for connecting potential-free contacts. For each of the 4 inputs, the operating mode of scan or switching signal transmission can be set.This text is machine translated.
The function of the 4 changeover contacts for each relay switchable, momentary or toggle mode and switch operation for remote controlling any device. The switch relay either only for the duration of the push of a button or change with each new scan signal their state between ON and OFF. The receiver evaluates each radio signal of the right transmitter series SH-12 (up to 60 pieces can be learned). The assignment of the transmission keys is already the 4 potential-free change-over contacts permanently assigned. There are 2 selectable frequencies (433.62 MHz or 434.22 MHz) and various control LEDs are available. Together with a special transmission technology results in a disturbance-free signal operation and ranges of up to 1000 m are possible. A feedback for the transmitted signal to the (Manual) transmitter by means of LED is also available. Ready-to-fly 4-channel receiver in a surface-mounted housing with 4 relay for connection to 12 - 24 V DC and λ/4 wire antenna.This text is machine translated.
The 3-channel radio receiver for direct connection to a 230 V mains is ideal for all surface-mounted private and industrial installations. Under optimum conditions ranges of up to 1000 m can be covered in the open space with the hand-held transmitter Order No. 60 98 04! The 3 change-over contacts can be switched over for touch, wipe and switch operation. Separate learning of transmitter code and -button for each relay allows assigning key combinations as well (e.g. alarm systems, etc.)! In combination with transmitter encoding via DIP switches, any number of transmitters can tele-control one and/or several receivers.nsmitters can tele-control one and/or several receivers.
For the 3-channel receiver module 19 26 35. This high-quality, flexible antenna allows you to improve reception if the receiver module can only be installed in areas with poor reception or when the antenna needs to be erected at a distance.
The sending module is for transmission of 4 switching informations and suits a current-value. The module sends the information,as long as at least one digital input is active. In case of the right acknowledgement of the receiver,the message is 3x/s repeated. The deactivation of digital input originated the message of a out-signal to the receiver, which switches-off the corresponding out-put. If no acknowledgement comes, sending continues for 3 seconds, in order to contact the eventually clocked receiver. For plug-in of LEDs, Piezodisk etc. are available for further input and outputs. Selectable frequencies (433.62 and 434.22 MHz) together with a special transmission protocol lead to an extremely trouble-free control Coverage possible up to 1000m depending on places.
This module evaluates received data of sender CX-12 T od the manual sender SHT-12 C4. The information are given as 4 bit word for further application. As long the valid data is received, the corresponding outputs are active and are switched off instantly on receiving the out signal. An analog signal displays the received value by sender. Each received data packet is activated by sender with extra information e.g. RSSI and supply status. Selectable frequencies (433.62 and 434.22 MHz) together with a special transmission protocol lead to an extremely trouble-free control Coverage possible up to 1000 m depending on places.
Handheld transmitter 3-channel receiver module 19 26 35. In optimum conditions, the hand transmitter is designed for use over extremely large ranges of up to 1000 metres in open air. Things that reduce the range are stray magnetic fields (for example, from other transmitters or high-voltage cables), buildings, interference produced by other equipment (for example, PCs, electric machines, high-power equipment etc.). Three different functions can be controlled by remote control. Multiple assignments are also possible, i.e. several receivers can be switched by one transmitter operation. 6561 codes can be set with one code switch. The unit has general approval in the EU and Switzerland.
The transmitter TX-121 can be used in connection with the transmitter module CX-12 T, a scan or switching signal via a potential-free contact to a suitable receiver can be transferred. You can depending upon the location of up to 1000 m can be achieved. For example, a humidity as possible connection is used, temperature or fill level sensor. In connection with the switching stage SHR-12 X4 the relay output is at the transmitter can be freely selected, so that the receiver the corresponding switching relay can be selected.This text is machine translated.
With the hand-held transmitter SHT-12, 2 functions of a receiver can be switched. The LED indicates the transmission is in operation. Via an integrated beeper is a confirmation of the receiver also signalled acoustically. The hand-held transmitter for safety reasons, these are programd in the factory with a continuous serial number. The hand-held transmitter is fully assembled and is already equipped with a 12 V battery.This text is machine translated.