Invision TV Wall Bracket Mount for 24-55 Inch Screens, VESA 100x100mm up to 400x400mm, Tilts Swivels & Extends for Flat & Curved TVs, Includes Spirit Level, Weight Capacity 36.2kg (HDTV-E)
| Dimensions: | 39.5 x 31 x 5.7 cm; 3.71 Kilograms |
| Model: | HDTV-E |
| Manufacture: | Invision Technology |
| Dimensions: | 39.5 x 31 x 5.7 cm; 3.71 Kilograms |
| Origin: | China |
It is very good qualit and strong.
When fitted to our new 28 inch tv, it covers all the connections on the back of tv. I had to cut the bottom off bracket as seen in pictures.
Also the shortest screw was still too long to screw in to tv so I had to add washers I had at home to fix this.
We were really impressed by this product, for such a great price, you really cannot complain. It is currently holding our 55-inch TV very solidly to the wall and allows us to watch TV at all possible angles! I have been using this for one week now a well worth the money.
The one slight thing I could say is that the instructions when adding the VESA mount extension arms were not the best, however it was self explanatory enough to ensure it was done correctly.
It was giving problems for fixing it to the TV and then to the wall. But once fixed it is great and a relief. You definitely need 2 people to fix this and the TV to the wall.
I loved installing these brackets on two of my TV’s. Installation is a breeze and gives maximum flexibility.
I needed my smaller TV mounted close to the wall and my 55″ mounted away from the wall at an angle. This stand worked really well for both.
The stand is stiff even with the 55″ at full reach (mounting screws are perfectly sized and very secure in the wall)
The only issue I had was a small one but slightly iritating. The selection of vesa screws for mounting the bracket to the TV didn’t fit my Samsungs and needed a couple of M8 washers on each to stop the screws bottoming out in the TV mounting points. Shame M8 washers aren’t supplied with the mount in case of this issue.
Finally, the cable tidies on the stand are also easy to use and successfully manage the plethora of cables going to TVs these days.
For me i was looking have my tv on the wall. Came across this product and does what it says on the tin. Supplier was brilliant as i totally messed up my first attempt. Sent the company my questions on what i had done wrong, they replied explaining how i could amend and bolts and resolve the matter, along with additional raw plugs. Have no hesitation in recommending this product and supplier.
The TV has been up 3 days, so not yet a long-term review, however so far it seems great. Well constructed, no dodgy manufacturing blemishes, loads of bolts/spacers/fastenings for the various TV sizes out there.
The only problem I had was with installing the wall plugs and respective bolts. With the amount of force going through the bolts, a couple of the wall plugs ended up just twisting with the bolt. In the end I had to make the hole slightly bigger, install another (smaller) plug (and screw) for the 10mm wall plug to ‘grip’ onto. So yeah, it works but it’s not pretty (that’s an issue for the next owners of the house to sort out).
If I was to install again, I’d use some better 10mm plugs. Maybe these:
https://www.amazon.co.uk/Fischer-Duo-Power-Dual-Component-538247-Pack/dp/B01M0PBKL0
Recently given a 22 inch digital tv, I decided to use it in the kitchen, mounted on a large wall, so i ordered this bracket through Amazon Prime. Duly arrived the next day. The item was well boxed, everything that was needed was included, including a spirit level to ensure correct alignment. Used the mounting plate as a template to mark the holes to be drilled, drilled the wall, installed the VERY substantial wall plugs and used the provided, equally substantial screws to mount the bracket to the wall. Please note, the manufacturers supplied plugs and bolts need a 10mm dia. hole, 85mm BELOW the level of the plaster on brick walls, they are that substantial, but do make the installation rock solid!! When i came to attach tj=he mounting plate to the tv, I hit a problem. The tv has a built in cd/dvd drive which meant i needed to use spacers (provided), but the screws for the VESA location were not long enough. I contacted Invision, the bracket manufacturers for their advice. They checked for details of my tv, but could only come up with a generic picture of the back which did not include the dvd drive, and asked if I could email a photo of the back of my tv. which i did, and the next day, a bag of extra spacers and screws of an extra length came through my letterbox. The installation is now complete, and as I said, absolutely rock solid. Congratulations to Invision, a British company making a quality product, and giving EXCELLENT customer service……thank you Anne and Rebecca, you’re both brilliant.
Roy
My 6th tv bracket I’ve had to put up, and this was as simple, sturdy, and well built as the other 5 at a quarter of their price.
Plenty of fittings supplied with it, and it doesn’t need the extra diagonal brackets if the tv is 100 – 200 vesa. Comes with small wrench that didn’t actually fit the bolts for the wall (I’d recommend using a socket wrench for this anyway), but it also came with magnetic spirit level and a hdmi cable which I wasn’t expecting. You’ll need a Phillips screwdriver (which isn’t included) to install the backplate to the tv, and the fastening screws go stop it coming off the bracket.
You can shift the tv about 10mm in a clockwise or anti clockwise direction when it’s installed to balance it if the bracket isn’t completely straight. I marked the bracket holes to drill, but had to drill into a solid rock wall (old fashioned cottage) and the wall killed my drillbit which made me drill a bit wonky by a few mm, which would usually drive me insane, but it was a very simple fix swivelling the tv up a few mil into position.
It’s solid on the wall and the arm is tight so it won’t move freely, but not too tight you’d struggle to move it. The bracket although hidden by the tv has a cover to go over it to hide the bolts and wires trailing through.
Would definitely buy again for the ease of use and quality.
Seems sturdy although not has good as the one which was replaced but does what it’s meant for. It keeps my new 55inch on the wall. Just a pity I had to drill more holes in my wall to put it up. Moreover, check that everything is in the box there were missing washes so had to get mor washes. But it does the job and for the price I do recommend it. Not a bad item.
I now have 2 of these in my house, the first I’ve had for 5 years and is so good I purchased another for the bedroom. I was surprised with everything you get in the box, almost felt like I hadn’t been charged enough. Easy to install, looks slim and slick and is very sturdy (holding up a very heavy 50″ TV). Don’t buy any other, don’t compromise with safety and quality, buy this one.
his was easy to install, although it wasn’t clear as to which way to attach the backplate to the television itself, once I worked that out it was simple, the range of movement is fantastic, and gives you as many ways that you could possibly want, it can be a bit stiff when first used but it has to quite stiff to keep it in the position required, all in all, it about as good as it gets for a tilt and turn wall bracket.
This is my first experience of TV Brackets on walls & I am mightily impressed with this one! I managed to install it on my own, NOT EASY but possible! My 4 Stars on ease of installation is a warning that you need a GOOD DRILL! The Holes MUST BE DEEP! I was cringing a bit using my museum piece drill but it managed eventually. I am VERY Impressed with the sturdiness of the bracket!
Very good product at a very reasonable price. Provides firm, safe support for our 55 inch TV with easy adjustment over the full range of positions shown in the Amazon product images. Good provision for cables. Straightforward to install; nice instruction leaflet with clear diagrams and plenty of technical data including the VESA mounting arangement fully explained – all written in proper English. Well done designers, manufacturer and everyone in the supply chain!
As others have said, this is a well constructed tv/panel mount and represents excellent value for money.
Do check where your where and how your cables will be going into the TV though…
If you are using older style cables (phono plugs, scart etc) *and* the sockets for these on your TV are placed in the area between the vesa screwholes, you will unlikely be able to use this product.
If, like most, you are using HDMI cables then you shouldn’t have an issue. Even if your HDMI sockets are in the area between the vesa screwholes, as long as the sockets are pointing downwards, you should be okay.
WOW! Unsurpassed packaging, quality bracket and fixings, worthy of England manufacture the way it used to be. Absolutely Top Notch and a weighty item up to holding serious TV sizes – buy one now; do not hesitate…This is the best single arm bracket ever……….:) GR8 if you also have real tools to drill holes – I used mains Bosch SDS drill – as plugs and 80mm long bolt screws are designed to hold your prized TV up when fixed in place. ……………….. ‘ That said, I fixed t to a 500 thick individual stone built farmhouse wall….. UPDATE..NEW YEARS DAY 2022….So good I have just bought another one for a further TV….Happy Days…
Firstly I rarely leave reviews, especially this positive, but this bracket is great! The range of motion and quality of the joints is perfect… even the fixings supplied are just the job and I never use screws and plugs supplied with anything as they are generally cheap rubbish, but not these… I am really impressed and fail to see what any tv bracket (some more than 5 times the price) could do better…
I purchased two of these to hang 2 x 42″ TVs in my daughters bedrooms, one was Samsung and the other LG.,, both were really simple and just attached on the main bracket without needing the extension plates, which all seemed great quality too…
Very good value, seems to have a wide range of fitments and will take a heavy TV.
I used it on a 43 inch flat screen and it fitted perfect.
It’s not simple to fit but no harder than expected, anyone should be capable of fitting it, it could be a bit unsightly for some who want it in the centre of the wall in the lounge and on view, mine’s in the garage so I wasn’t too bothered about looks although when flat it’s hardly visible.
There’s a good range of motion that enables me to position it virtually anywhere through 180 degrees to watch the TV and to fold it flat in three different positions, if needed, when not in use.
Purchased 2 of these one for a 55 inch Sony bravia and one for a 43 inch lg , very straight forward to put up plenty of fixings that come with it the Sony and lg both were different screw sizes but they were available in the boxed contents so no drama fixing the mounts on , very secure and the movement on this bracket is fantastic highly recommended
Used this to mount a 42″ in the corner of a room. Construction of mount seems very good and generally has a weighty feel to it. Good range of screws and spacers provided to ensure mount is correctly attached to TV, I did not have to use the additional arms which I suppose are for larger TVs.
Strangely the provided spanner doesn’t actually fit the mounting bolts for the wall but only a single pair of screws which secured the mount to the mounts arm, these can be adjusted with a screwdriver so a bit pointless!
Overall very pleased for the price, even comes with a HDMI lead which some people charge 20+ for! (I understand it may not be a good quality one)
Purchased this TV bracket due to a recommendation from a friend. I’m a bit of a novice when it’s comes to fixing heavy things on to plasterboard walls but thought I’d have to learn at some point. Fortunately I knew the exact position of the timber studs so I fixed the bracket directly on to them. It feels completely solid as the fixing screws supplied are large.
One gripe I did have, although not really the fault of the bracket, is that the TV didn’t quite fit on to the plate that you then slot into the bracket. This is because my TV is wider at the bottom and then fully extended position of the plate clashed with the larger bottom. I didn’t manage to fix the plate on and despite being a bit wonky it feels solid. The TV will fall off the bracket before the bracket falls of the wall put it that way!
I haven’t really tried extending it fully open and wouldn’t really feel comfortable doing that as the use that I have is close to the wall and I have no need to move it. So can’t really comment on it in that regard.
In summary I’m pretty pleased with it overall, it’s sturdy and does the job. I’d just check the back of my TV in future as any bits sticking out can affect how easy it is to fix the TV on to the plate.
Prologue: And it came pass that two wall brackets were delivered to an Amazon collection point and someone opened the collection point door, pulled out the box, and nearly dropped them on their foot.
Make no mistake these are heavy, having said that they are robust.
They are very versatile, give good adjustments and include bits for every possible installation. Having said that, you may need to buy additional wall fasteners.
They are are easy to install, all the bits you need are in the box, including a spirit level. But do a good recce on the point you want install the bracket and make sure you follow the instructions.
They are heavy.
We used this bracket to mount a 40 inch TV to a wall with wood battens.
It was very easy to assemble and they include plenty of fixings to attach larger TV’s with extenders on the VESA mount.
We didn’t need these and it was nice to see different length screws included for different TV mounting points.
Mounting to the wall was easy and straight forward. It was great they include a mini spirit level to align things up.
The bracket includes plastic covers to make the arm look less utilitarian.
It is very sturdy and well designed. We had to nip up the bolts for the rotational and tilt movements but a spanner is included for this which is great.
When mounted there is no slop or play in the movement.
You can swivel on the two arm system with a nice smooth motion.
Overall for the price a great item and would not hesitate to purchase again!
Arrived when expected. Package came with easy to follow instructions but you definitely need a few bodies to help out. Bracket is extremely sturdy and has a great range of motion. Dont worry if there are parts left over because these are for the different size tvs. Would recommend this product and was the best priced in the range.
We bought a new TV and our existing wall bracket was not compatible se we needed a new bracket. I bought this one based on the very high number of high ratings and reasonable price. I have been very impressed – pretty well made, everything you need in the box – including a mini-spirit level. Was easy to fit (30 mins max including measuring twice), and very happy with the level of motion/adjustability and the sturdiness of the TV on the bracket. An excellent product, highly recommended
Great bracket with a good range of motion including tilt, swivel and side to side.
To install, make a cardboard template of the bracket so you know EXACTLY where to drill the holes into the wall. Start drilling with a very small masonry drill bit, e.g. 4mm and work up to the 10mm drill bit, otherwise your holes might be a bit off. The whole operation can just about be done by one person thanks to the clever mounting mechanism that allows you to put the TV on the bracket and leave it hanging there before you secure it onto the bracket with two retaining screws.
Don’t get over excited, it’s a bracket for a TV..
However, we used it for a wide-screen portable TV (portable secured on a wall!!!) …
Is solid, holds the TV at an angle and doesn’t move with the weight…
So put it up, hook the telly on, tighten it…
Jobs done, however you might not have to adjust the bracket, but ya will need to dust it…
This is a great well made bracket. This is a solid and heavy bracket that you know is going to hold well and stay in place. It is very easy to fix to the wall following the guide that comes with the bracket. It comes all in one piece ready to setup and fixing to the TV is easy. Took a total of 10 minutes to unpack read and attach to the wall
I was initially concerned about the weight but I fixed this to my dry-wall through a couple of half inch bits of wood that I bought from the DIT shop, just to help distribute the weight. Item is sturdy (a lot sturdier than the flimsy TV I have bolted to it). Have to fiddle a bit with the angles of the TV and the two bends in the arm to get the TV level but I have found this with other brackets as well and once you get the hang of it it’s no problem.
This is my third Invision wall mount and it’s as solid and reliable as the other two
It comes with decent sized screws and once mounted, will not move and has no play in the wall.
It’s the first double arm one I’ve got. I didn’t need as much sideways motion with this one so didn’t bother with the single arm version. Even so, it has a decent range of motion in the two arms. I reckon we could sit 45 degrees to the tv and turn it enough to watch.
The best bit and the main reason I went for this double arm model is it folds super flat against the wall, so our monitor (32″) can get a decent distance away from our seating position so we don’t feel too close.
It’s stiff to move, not difficult but reassuring. Comes out quite far (just over 40cm) so can position the monitor at the very end of our desk for watching like a tv.
The mount comes with loads of screws, adapters and spacers to help you fit it to any vesa compatible tv.
There are also slim plastic cable management clips. They’re okay. They do the job in version cable setups but not always. We’ve used cable clips this time because of the tv configuration.
I’d have no hesitation recommending this to anyone.
Good quality bracket but flimsy plastic bits supposed to “hide” the arms of the bracket.
The bracket itself is very good and strong. No fear of TV falling off the wall…
And the spirit level is cute.. . And handy. I am now using it with my day-to-day DIY. Nice little thing much easier to handle than my 1meter one.
Also having that great selection of fixings depending on the size of your TV is a plus.
Can’t fault this bracket so far and price is good too.
Well happy customer and son…
I used this to hang a 50″ Sony TV on a solid wall covered with plaster board. Firstly I was very impressed with the build quality of this mount given its price, secondly I liked the fact that the mount came with a range of fixings for different wall types saving a trip to a DIY store.
I had to use the ‘extension arms’ to fit Sony’s VESA pattern but other than that, I’m really impressed with this mount and had envisaged paying at least 5x the price! It’s five stars from me!
We used this for a relatively old 32″ TV with 200 x 200 VESA fittings. It is on a plasterboard wall so we had to find the stud to install it. Our studs aren’t wide enough to use the 2 outer holes but we used one outer and the middle ones, both top and bottom. We’re very confident in the safety of the mount, we’re able to get the full range of motion without so much as a wobble. It’s default setting is full tilt forward, and to adjust that you need to tighten part of it. We haven’t bothered as the angle is perfect for us but if you didn’t want full tilt there might be additional work in the installation. Aside from that, the installation was very straightforward and instructions were very clear.
This is a solid bracket – especially if you are attempting to install it on your own! It is heavy which means that getting it level to mark all of the necessary holes is a good workout! Once achieved it is simple to install the TV – even if the cable channels are a little too easy to spring off and the mounting plate plastic cover is a real challenge to get to fit permanently!
Overall, recommended – with someone to help you install it!
I think the most important thing when installing an articulating wall mount like this, is careful preparation. I hadn’t used one before and it takes a bit of thinking to figure out the different ways it can move before you can decide the exact position to drill the holes for the bracket. The TV can be flat against the wall or moved out either side and positioned straight-on or at an angle, left or right. It’s surprising how far it moves if you’re not used to it. I found swinging the empty TV box around quite useful to get an idea of where it would reach to.
The instructions are very clear and you have additional adjustments that can be made for rotation and tilt. You also get a comprehensive fitting kit of spacers, bolts and wall plugs, and a wee spirit level, a spanner for the TV fixing, and a 2m HDMI cable. I was fitting it on an exterior wall covered with plasterboard on a stud frame. I drilled a test hole to measure the depth to the brickwork and felt the largest bolts supplied (80mm) might not have the purchase that I’d be comfortable with so I made a quick trip to the nearest diy store and bought a pack of 100mm bolts, just to be safe. It’s not something you want to take a chance with when you’re swinging a few hundred quids worth of telly around in the air.
The TV has been up for a few weeks now. It’s level, feels very secure and works just I had hoped for the space.
This is a sturdy wall bracket, well made and a fraction of the cost of anything available, at local stores. It came with a very comprehensive fixing kit, which I would expect should cover all TV mounting needs. It’s very easy to install, following the instructions and provides a good range of mounting options for the TV.
Great bracket that’s if good quality, feels very sturdy indeed and I feel confident that it will keep my expensive TV mounted safely. Love the tilt and turn facility I can move the TV to all angles required without fuss. The bracket does stand out from the wall by 60mm so I built a unit to remove the 60mm so that it sits flat. Only reason for 4 stars is the level is pretty naff, otherwise though a great bracket at a good price
Honestly, I reckon you could hang my fat arse on it and it wouldn’t even flex!
The fittings are surprisingly good quality (had other mounts that come with screws that appear to have been made of toffee).
Installation is quite intuitive – although the instructions are quite easy to follow.
Really strong and solid bracket,looks good too,comes with all the fixings you need,as you can see from the picture,that’s all the parts I had left over.
I used it for a 40 inch samsung and the bracket fixed straight onto the tv,no extension arms required, even had the screws to go into back of tv..just a word of advice look at the fixing diagram carefully so you don’t hang it upside down as I did,had to take it of and refix not a problem just makes you feel like a donkey…getting another for our bedroom,would definitely recommend.
Bought this wall swivel mount for our 32in TV and very impressed by its heavy construction — it’s the same metal gauge as my car jack! It offers a full range of movement and its swivel joints have no play whatever. I can highly recommend this stand. It has a full range of metal strips and spacers to fit different VESA mountings, mine was 300 x 200, and some will find it tricky to select the correct combination of mounting holes. I did contact the maker’s advice line and they came back with comprehensive instructions — full marks here.
My other reservation is that its heavy build is matched by heavy mountings to the wall. It is supplied with four bolts and wall plugs requiring 10mm holes x 80mm deep, which may stretch the average DIY drill. I have a powerful SDS rotary hammer and drilled into an outside brick wall. Do heed the warnings regarding dry lined (plasterboard) walls, these will require the secure installation of 4×2 wooden battens to carry this beast and your TV set.
There is nothing to dislike about this product, usually there is something missing from these kits but this one has all the bits and very good instructions. The wall bracket and mount are very strong and well made and along with the comprehensive instructions made it’s installation very easy, great product.
This product is very impressive in terms of sturdiness and build quality. It is very good value for money, straight forward to attach to the television and to the wall with the fixings provided. You do need a 10mm masonry bit for the wall plugs and a socket set for the coach bolts
The only slight issue is that you are supplied with an amazing selection of spacers and machine screws but no nuts. Fortunately I had some M6 nuts in my bits and bobs.
Excellent quality for the price.
Can’t believe how sturdy this little thing is! I have an old Sony bravia 40 inch LCD TV and this holds the TV very well. Was very easy to install once you’ve decided on where the holes need to be located on the wall. Only thing to bear in mind is that the holes in the wall are slightly offset by about 5 inches off Centre so the TV Centre doesn’t sit behind the holes in the wall. Once you’ve understood that and holes are marked, it’s a breeze to install. Also appreciate the different fixings they provide to ensure that all TV makes and models are covered. It’s also one of the few TV brackets that are only 55mm away from the wall making the TV very close to the wall. Great little product especially at this price!
Can’t believe how affordable this bracket is. I had looked at other models that were double, even triple the price of this one, and “on paper” this one was the leader (in terms of specs, etc). Well I can confirm that it exceeded my expectations. Very sturdy, well designed and built. Comes with all the fittings you need for every size of tv. Absolutely happy with this purchase. Can highly recommend !
Very sturdy and fantastic quality. Solid metal. Very happy for the price. Huge range of fittings and fitted my new 32″ sony bravia. Nice cable tidy on the brackets too. Only downside is the quality of the plastic cover to hide the screws. Feels cheaper than the rest of the kit but not a big deal as remains mostly hidden. Also beware that Sony have stupidly put most of the connections in the centre of the tv, so remember to fit your cables before attaching your tv mount unless you have tiny fingers!
The TV used on this was an LG 43UN80006LC, 43″, vesa 200 and weighing 9.5kg. Interior wall is plasterboard but behind it is brick. Supplied nuts, screws and wall bolts is substantial but raw plugs are a little shallow so be sure to push the plugs so that they sit firm into the brick behind. Once installed there is a plastic cover which snaps over the installation panel. Not many more expensive brackets have this so it makes the installation look neater.
Adjustability once the TV is on is brilliant covering all ranges in case you don’t install straight like tilt left and right.
Brilliant hardware!
I have fitted a few different wall brackets recently. Getting the screw holes spot on in line to keep the vesa mount straight and level is difficult. this baby has an adjustment on the vesa mount so you can move the tv around slightly to get it straight. had to put mine on a solid wall and the drill holes are never in line this is a great idea.
This is a really good mount. I fitted it this morning without any issues. It’s designed to fit a very wide range of televisions and is strong enough to support a heavy set. There are plenty of additional bolts, spacers and extenders to attach the most obscure models. The main mounting fixings are sturdy and as long as you drill deep enough holes they provide a really reliable mount. It’s easy to adjust the angle of view both horizontally and vertically and you can level the screen if it ends up a wee bit skew-whiff. The inclusion of a descent HDMI cable is a welcome bonus.
It did take over an hour to assemble due to locating suitable studs in the wall. the instructions are OK but diagrams could be much clearer for orientation of parts etc. Perfectly doable for the first time DIYer but just takes a while to understand the diagrams. Once fitted though, very solid and good range of motion. it does feel like the tv wobbles if moved when the arm is extended but it is very much secure.
Very well constructed. More screws/bolts/fixings than you could conceivably ask for, or need for that matter. Fixing kit even supplied with a small level!
Plastic trim details hide any bolts/fixings from view and additionally there’s provision for cable tidying within some of the trim details in the arm of the bracket.
Overall, a very heavy duty, well designed and constructed product.
After buying a more expensive one, that was just too stiff, bulky , horrid grey gun metal and wasn’t even the correct size anyway. Sent it back. I read the reviews on this one. I liked they showed you a video clip on how it works. It arrived super quick and just looks nice ( as tv brackets go) you could just tell the workmanship was of great quality. My electrician who fitted said, you don’t get better than this. It was easy for him to fit it. I used it for 43 inch Samsung crystal view tv, fits perfect. The bracket comes with extra long arms if you have a bigger tv. Also an HDMI cable , which is a bonus ( but not used. This bracket glides beautifully, no stiffness, no wobbles, or unwanted tilts. Ok so your not going to see the bracket at times , but if you do it looks sleek ( not garish. I would highly recommend this bracket , thank you invision for making something that works and looks effortless. You always question when something is so cheap it won’t work, they’ve priced this very reasonable. Thank you for being true to your consumers. Absolutely excellent product.
I was wary of this as the price was so good & reviews seemed too good to be true. husband even more sceptical. How wrong we were. product exactly as described. Husband so impressed with strength he said the wall would come down first. We were going to pay 4x this price. Our tv has unusual fittings but everything supplied. Husband had a query & amazed how good the company were! Excellent all round. It also sits really flat to the wall, flatter than my cousins very expensive one that doesn’t even move! we’re now thinking of putting our other tv on the wall & would recommend this item to everyone.
When a product is simply superior in every way, to all of its competition, it’s should be recognised.
Everything about this bracket is brilliant, everything! From the great grammar in its amazon advert/description (an increasingly rare thing these days), to the fast delivery, clear instructions and simple assembly (btw, whoever wrote the negative reviews stating they found this hard to assemble, please don’t try anything potentially dangerous, like and changing the brake pads on your car or anything like that, ok:) to the simple fact that it looks great and works perfectly! One of the best items I have ever purchased from amazon!
P.S, I also have their larger bracket for the bigger screens, it’s just a brilliant as this one! Well done Invision!! If only all Amazon sellers/products were this good !
This bracket is just great! I had been looking around for a while and was going to buy a more expensive one from a local shop thinking that the more money I spent the better the item. I’m so glad I went with this after reading the reviews!!
It’s a great sturdy bracket, the range of motion is good but is really stiff to move, which isn’t really a negative as the TV stays in place and doesn’t swing about easily.
It was good that it came with a range of screws/fixings for both the VESA plate and wall options. I was installing mine onto a plasterboard wall, which unfortunately was not in a place where a stud was so I just used 5 plasterboard anchors instead of the supplied fixings and it’s on there with no worries. I had help to install it and it was reasonably easy to do.
All in all I am really pleased, especially the price of it and the addition of a complimentary hdmi cable and mini spirit level was a great touch. Thinking of buying 2 more for the other TVs in the house.
A very solid sturdy bracket, I am no DIY expert and was a little daunted when the box arrived but all went well. You need a no.10 masonry drill bit, I would advise 1 or 2 smaller bits ( I used a no 5, then a no.7) as well for a guide hole and then enlarge it. You don’t want a hole in the wrong place! The bolts are big, you need to drill all the way until the chuck is against the plaster. The bracket is extremely solid, your TV will not come away from the wall. A spirit level is included , nice touch!
This tv bracket is sturdy and the mechanism in it allows the TV to be positioned easily from left to right,back and forwards and to tilt it. The TV I’ve used it for is about 27-30″ (I can’t remember) but it fits the vesa measurement of 200×200 without the use of the additional parts for a bigger tv. I’ve no doubt it would comfortably support the larger tv sizes it says it will. The fitting of it was a bit tricky because whilst drilling the top right hole I hit the edge of the brick therefore the hole was out of alignment with the others but this isn’t why I’ve given the ‘installation’ 4 stars, this is because I think the top and bottom holes on the bracket could be a bit wider apart to avoid the drilling of one hole effecting the second hole by the brick or concrete cracking, although I must say this wasn’t an issue for me, but just that I could envision this happening to other people where the wall had a weakness. The instructions said to drill into the four corner holes if fitting to a brick/concrete wall, but as you can see from the picture I drilled the top two,middle one and the one bottom. I’ve no doubt that for this size tv one hole top,middle and bottom would be more than enough for a sturdy fitting.
I have just got round to using my TV bracket as we have finally moved house, it is reasonably sturdy but I think ours is faulty as you can’t tilt it up and down, it’s just limp, even when you tighten the screws on the mechanism. A little bit challenging to install but the tv has been up on the wall for 5 days now and hasn’t fallen down so seems like it has done the job, just disappointing about the limo mechanism.
It feels heavyweight (which is good as it needs to support a lot of weight), and the instructions are ok. As the TV I had was 49″ I needed to use the extension arms and it was not totally clear which way round they should be attached, but I think I have done it correctly.
The bolts that connect it to the wall appear heavy duty, and are attached to brickwork so I am confident that it will not fall off.
It is easy to move the TV out to different angles.
There are plenty of alternative screws for alternative fittings.
This is an excellent bracket. When it first arrived I thought it weighed very heavy and was a bit concerned. However it fixed to the wall easily and it’s sturdiness reassures me that the tv I have hung from it isn’t going to go anywhere other than where I have hung it. There was a problem with the plastic covers which hide the wall fixings but I emailed the company and they could not have been more helpful. They put replacement covers in the post that same day and 24 hours later I received them. If you are looking for a tv bracket I can highly recommend this one.
I hate cheap, flimsy rubbish.. so I was delighted when this came and it was everything but that. Design and build quality are excellent, with ample adjustment to hang the tv/ monitor straight, level and square. A nice touch was the spirit level provided to help with this. What I also liked about it was the range of screws (bolts) and spacers that came with it to make the job perfect. I’ve still got most of them unused, but ones I did use were spot on and ideal for my requirements. It was refreshing to not have to cut overly long bolts down or drill out spacers that were just a bit too tight over the screws. Once the bracket was secured to the wall, lifting my 40 inch TV onto it was a doddle and only a couple of screws were needed to fix it safely, I was even considering getting another so I could swap over my 27 inch PC monitor and 40 inch TVs when I need to. Definitely recommended, 5 stars.
Bought 2 of these one went on a plaster wall and another on a brick wall . Was difficult to drill into the brick wall and the plaster we used a machine to find wood to drill into. I couldn’t have done this on my
Own luckily my dad put both of these up In our house and they seem strong with good range of movements
They both came with a little spirit level and a hdmi which I didn’t use but may be useful
To some .
I was surprised to see how sturdy and well made this bracket was as I did not expect this, for the price. The bracket came with a selection of 7 different lenghts bolts, which came in handy as the back of my 42inch TV where the backplate goes had 2 shallow holes at the top and 2 deaper holes on the bottom. 2 different size spacers where also included and 4 wall plugs and bolts for fitting the bracket to the wall. There were also other bolts, nuts and 4 extender arms to cater for different size TVs, if the back plate is to small for the back of the TV. Instructions were very clear and I fitted this bracket in 30 min, of which most time was spend getting the drill out and preparing. Remember to fix the bracket 12.7cm to the left or right of the middlepoint of your wall to ensure your tv will be in the middle of the wall, once on. What I liked was how easy it was to place the TV onto the arm as it clips in and is supported by the arm when you tighten the screws to fix and level the TV onto the arm, so I did not have to support theTVs weight while trying to tighten it. I will definitely recommend this product and will buy it again when needed for another TV…
Great bracket, very sturdy, one slight niggle, the plate at the rear is very large and it blocks the HDMi port on the back of the TV, luckily it only covers the HDMi2 (arc) port and the other three are free. The TV is in my sons room and he mainly uses it for gaming or sky tv but always uses his iPods so no need for a sound ba
In terms of customer service I am not impressed at all.
I received the box with the bracket along with various bolts and spacers. I had looked at it for some time but couldn’t find any way of securing it to my TV Model number LG FLATRON M2780DM-P7.
I have four holes on the TV 100x100mm however the only bolts that would fit were the M4x25 so the spacers were useless. The problem was that if I fitted the back plate to them the plate covered all the inputs.
It states in two places on the instructions that if you have any concerns or require assistance contact them via email. I did this 12 days ago but still no response, I also telephoned (not easy to find their number) the answer message stated all technicians were busy but leave a message and one will call back. I am still waiting 12 days later.
Solid, surprised it connects to the wall using only 4 bolts but it has been solid and held without any issue so far. Good range of motion for my 50″ tv. Folds away nice and flat so it doesn’t stick out much.
The cable management system that it comes with is some clip on plastic shrouds, they are neat and functional but if the cables are thick it can push them off slightly – I used a cable tie to hold mine in place and that seems to work perfectly.
It’s easy enough to install, just 4 holes in the wall. (I installed into a brick wall and used 4 expanding shield bolts to hold it on mine)
Fantastic! I purchased a TV bracket from a big store local for almost twice the price and its awful in comparison, this bracket has amazing range in motion and its smooth in action I have it in my bedroom for a 50inch flats screen and its perfect it almost comes right out into the floor so you can easily watch from your bed at any angle wish I had of got this one for my living room before I purchased the other, it also comes with a spirit level and everything you need to fit it, I’m lucky my hubby is a maintenance man so he put in up in less than 20mins I highly recommend
This is a very sturdy mount and holds up our TV with no problems at all.
I did have some problems getting it up, but they were not faults with the unit. First, our wall is hard and getting the holes drilled and then the very long screws in was quite a workout. Then, I installed the wall bracket upside-down and had do unscrew it and do it again. That was even though I knew it had a right way and a wrong way to do it! I’d advise anyone trying this to triple check that the bracket is the right way up before screwing in.
The bracket comes with 4 extension arms to allow for larger TVs. As I didn’t need these, I found that I could bolt them together to make two longe arms, which I then used to hang our sound bar off the bottom of the TV. That was a nice bonus!
Solid bracket easily holds the 43″ TV i fitted today.
The design of the holder for the TV is excellent,a slide over system then 2 screws to lock it in place.
Great accessories pack with all bolts,spacers and fixing screws and even a handy spirit level.
The only thing i would change would be a better quality spanner for fixings and shorter screws for fixing to wall studs.80mm screws are practically the same size as the stud and i never had a 4mm drill of that length anyway.
I think 60 mm would be a better option.
This bracket is fantastic. I had problems getting a bracket that had extension wings to fit my Vesa (400mm x 200m) but this has wings that allow a fit for anything upto 400mm x 400mm.
It comes with really substantial hardware; you will need a 10mm drill Bit that can drill an 80mm deep Hole, if you’re going into a brick wall you’ll need an SDS drill, a cordless just wont cut it. The fixings are big and strong and the bracket is absolutely solid.
The addition of the sprirt level and HDMI cable make it great value for money.
I fully recommend this product.
Really glad I went with this wall bracket as it’s a reasonable price and does what it’s supposed to.
My partner fixed it to the wall without any difficulty.
For me the features that make this worth buying are its sturdiness, the fact it fits flush to the wall, and that it is easy to swivel the bracket around. Meaning I can fold it back against the wall when not watching tv.
Would definitely purchase again if I needed to wall mount another tv. This is particularly good if you need to have the tv at an angle or are restricted for space.
Not being the best or the worst at DIY I found this relatively easy to put up, despite one of the holes I drilled being slightly off and making it more difficult than it needed to be to screw it to the wall (it was the walls fault). That said when it was up it is now clearly going nowhere. All the bits were there for a variety of fittings. I was a bit worried reading some reviews that the right ‘M’ screws for my Samsung (UE43TU7100 – great TV for the 300 I paid for it BTW) would not be included but everything was there. Great range of motion and easy to move about. Cant fault it.
Not sure why they need to throw in a spirit level and an HDMI cable. But whatever. I’m not mounted this yet but I have had it out and examined it pretty carefully. It looks robust and with the right articulation. The screws provided for wall mounting are really wood screws and you might want to use expansion bolts instead. My real concern is that the VESA plate isn’t obviously detachable which could mean the thing will be quite difficult to mount in a confined space (a niche between wall and chimney beast).
Really great product. Everything you need is provided including a versatile set of parts that will fit the majority of TV VESA mounting holes. The options include a variety of spacers which is great. The machined bolts that are used to mount to the TV are in various lengths and sizes.
I mounted this particular bracket to an LG OLED TV in an awkward position which this bracket worked excellently. An offset mount is exactly what I needed and you can happily pull the TV forward to muck about with the connections without worry.
The only slight and picky negative was lack of supplied options for mounting on plasterboard. I took a guess at what would work and got lucky.
I would buy again and I have already recommended this bracket to another family.
Attaching it to the TV:
This was purchased for an old Sony Bravia TV with odd (200x150mm) VESA dimensions. I clarified with Invision CS (who were very well-informed & responsive) before puchasing that it was compatible & simply used the back-plate without the additional ‘wings’ supplied; cinch to fit & lines up perfectly. I wanted to use the longest spacers provided since, due to the – outmoded – TV design, the backplate covers all the connectors, so purchased some longer (50mm) M5 screws to allow sufficient clearance. The 25mm screws supplied would have been fine were it not for this. There’s a very good selection of other options too so you should find what you need in the pack.
Attaching it to the wall:
My TV weighs about 17-18kg – for a 32″ it’s a bit of a clunker due to its age & I bought this for my kids’ (6yo) playroom so I deliberately over-specced the bracket to cope with the potential ‘abuse’. Until I started drilling I hadn’t realised that the walls were thermalite (breeze-block), i.e., a bit like the solid sponge-type stuff that’s used for flower-arranging… I exaggerate slightly! I therefore opted to trade-up on the fixings & swapped the 80mm long coach screws provided for 100mm & used 2 x rawlpugs in each hole – the ones provided at the back & new ones purchased at the front to give sufficient purchase. As with those provided, the screw heads are hex so I was able to tighten these with a socket – I doubt you’d manage to do this with a spanner let alone a screwdriver so worth considering this before you embark. The result: a very solid, secure connection, tested out (as suggested elsewhere) by each kid swinging on the bracket – at maximum extension too – w/o any mishaps. (I’ve obviously banned them from doing this again now there’s a TV attached to it!) TV is dead easy to attach once you’ve fitted the bracket to the wall but it is a 2-person job – 1 to guide, the other to lift.
Instruction booklet – though typeface could be a little bigger – is easy to follow & has good graphics too.
All-in-all, an excellent product. Seems a little counter-intuitive that you’d entrust your 1,500-worth of Sony/Samsung/LG to something that costs 25 but I really think you’d struggle to find better at any price.
* I obviously didn’t test this but would be confident the wall & TV would ‘fail’ first!
I installed this in a brick wall with the supplied four plastic wall plugs and heavy duty bolt/screws. The instructions say to drill in for the full length of the screw, which is about 8cm, so that the wall plug can sit solely inside the brick beyond the plaster. You need a 10mm masonry drill bit.
Although the bracket is designed for use up to VESA 400×400, the base plate is VESA 200×200. You only use the extension arms for larger dimensions. I installed a 32inch TV, 200×200 without the arms, so I cannot comment on larger TVs but this unit seems very sturdy and extends a good length which is why I chose it instead of a slightly cheaper version which would have been sufficient for a 32in TV. It can also Tilt some degrees and you can make a small final adjustment to the horizontal position after installation.
Some polystyrene in the packaging – they should have used cardboard instead.
I actually ordered another after getting suckered into a TV deal on black Friday. Very easy to install, the included spirit level makes the job that much easier. All of the necessary fixings were included and even when I managed to mess up an install, I reached out to the company to ask for them to send another bag of fixings out (I had said I would pay for this), they sent another out free of charge. Excellent product, excellent service. If I get suckered into another TV at Christmas, (maybe for the mancave) I’ll be sure to purchase another bracket here again.
I chose this wall mounting kit for our new 50-inch TV because it is made by a British company and because the reviews were good. I am so glad I did: the bracket is rock-solid, moves smoothly, folds back neatly and is exactly what I was looking for.
Unfortunately, although the kit included a range of fittings for different TVs, they did not fit our Samsung model. I emailed Invision and received a very speedy reply. Their friendly and helpful customer service team sent me a pack of additional fixings free of charge, which solved the problem.
The fitting instructions were clear and installation was easy once I had the correct fixings. I would definitely recommend both the product and the company.
As with product like this, how well you mount is is as import as the product itself. This mount is very sturdy, no complaints at all. It will easily cope with the 32″ TV that I’ve hung on it today. The supplied fixings are good quality and the instructions are well written and very clear. One complaint, the supplied spirit level is garbage and resulted in my mount being slightly askew- throw that away and use a proper one. Fortunately there was enough adjustment in the bracket to compensate for this
The bracket is sturdy yet compact and feels to be good quality. It provides a great range of movement and all for significantly less cost than some of the brackets being sold by the big electrical retailers. I am very pleased with the product. Fitting was straight forward, but you do need to be sure where the wooden stud in the wall is to get the strongest fitting (obviously assuming you are fixing to a stud wall!)
I am also more than impressed with the customer service. I used the bracket with a Samsung 49Q80T TV and the bolts/spacers supplied to fix the bracket to the back of the TV did not quite give fit the length of the fitting in the TV. I could have easily overcome this with a couple of washers but dropped a line to the suppliers and they responded quickly and offered me a choice of solutions including posting me some different length spacers which they calculated would do the job after looking up my TV details on the internet. The spacers arrived quickly and all is fine.
I am impressed with product and service, and will probably buy another bracket to fit the old TV in the bedroom
We bought the bracket because the stand provided withour 43″ TV was bulky and we couldn’t move the TV far without it falling off the sideboard. Having worked out where to mount the bracket it was easy to fit to the wall. The TV was easy to mount on the bracket.
When we are alone the TV is against a wall but we are able to pullit out when we have guests so that all can see.
After two months of use we are very pleased with the bracket.
This is a sturdy and flexible product for a modest amount. I absolutely love the two I have purchased for spaces where I need to move the viewing angle for different viewing positions and places in large rooms. I was a bit nervous about this one because I wasn’t sure it would be up to the job . But my fears were soon proved to be unfounded. You do need to make sure that your wall is strong enough to support your TV.
Even though the product is good value, the customer service behind it is wonderful. We had a problem with the second one we ordered, and messaged the company for advice. They immediately requested information and when it couldn’t be resolved, they dispatched a replacement. This is fabulous support and I have no hesitation in recommending the company.
I was so surprised at how heavy and sturdy this bracket was. My old 32″ lcd was 3 times heavier than the bracket and my new 32″ lcd is about the same weight as the barcket thats how fact tech changes these days. To put it simply, you cant go wrong with this bracket and to be honest I am not so good at the DIY stuff and I was even able to put this up with 30mins.
Great solid bracket with all the fixtures and fittings you will need to instal it with your tv on the wall.
A Great Buy…..
Excellent TV bracket.
Easy to install with high quality fittings. After attaching the bracket to the wall you then simply lift TV onto the bracket. Also helpful that you can adjust the TV after fitting to make sure it’s 100% level.
Tilt function is great to block glare from lights and cantilever feels robust.
All round, a great high quality purchase.
3 months later the arm has held solid, fixed into solid concrete with no issues and no signs of it slacking at all. The arm is sturdy and strikes a good balance of easy to move but not to the point of it being able to wander of its own accord. Although the manual states I am well within the weight limit and size. I’d suggest going dual lever for anything expensive or over 50″
20 minutes total to fix to the wall the support comes away from the main arm for easy fitting to the back of theTV andi is then drop into a receiving fitting on the arm making for an easy mount. At these sizes though you will want a spare pair of hands as you’re trying to line up two circles that are about 4″ wide to get them to interlock.
This mount then allows for some rotation of the screen before locking in place with a screw so even if your arm is mounted to the wall a little bit off balance there is some wiggle room to balance out the actual mount of the display.
After successfully installing this bracket, I realised I had made a few assumptions early on. I assumed the vesa holes in the back of the telly were completed central, both vertically and horizontally. They were, almost. And I just about got away with it. But it’s something you might want to check if you need to be really precise with the final position. As an aside, if you have a Samsung, all Samsung TV’s are vesa compliant, so you’re good to go on that score. You need to be happy burying massive holes in solid walls with a powerful drill.
Excellent product. Quite heavy in its self. We hung a 32in Sharp tv to a solid wall, which after feeling the weight 9f the arm was overkill, but its hard to know this when browsing online!!!! Either way, did the job. Good thing is you can upgrade tv and still use this. Has multiple fittings for various sizes, instructions give VESA fitting sizes. Screws for all combinations of fitting supplied. Wall raw pl7gs were high-quality and no concerns about its fitting to wall.
Bit stiff moving the arm straight out of the box, but a bit of moving and the arm becomes much more pliable. Would definetly buy again and was a very good price for what you get.
You need a degree in rocket science a good sense of humour and the patience of a Saint, the written instructions and pictures are about as clear as pea soup and the pictures are that small you need a magnifying glass to decipher them. I was ready for a nervous breakdown by the time it was up, the screws for the wall weren’t long enough and it was pot luck as to where all the other screws, nuts and bolts went.
Absolutely amazing bracket. Sturdy, sleek & incredible build quality. With this, you aren’t going to worry if your TV is secure or not. I’ve two installed in my home. Both on brick walls. Unbelievably strong. The hinges are very large & strong. Even when moving/tilting the screen you get the reassurance that it’s going nowhere. Lovely solid movement. I couldn’t recommend this enough – if you have read my review this far, just buy it. It’s that good!
Brilliant tv wall bracket and the price was excellent too!!
I had been looking for some time for a good sturdy bracket to mount my tv on as the stand it was on was not safe from my daft dog,and the tiresome task of wiping dog snot off of the screen was a chore!!
I went with the reviews it had so I took a leap of faith. I’m so glad I did.
I recommend this product to anyone who is looking for a reliable, very sturdy and stylish wall mount. It was so easy to set up and it moves around easily with no bending or bowing . I ended up re ordering it for a family member.
Brilliant product at a brilliant price!
This is a superb piece of kit. Don’t be put off by the low price – it’s as strong as any TV bracket I’ve seen.
I’m using it for a 27in monitor, but I wouldn’t have any hesitation in using it for my 48in TV, and I’m quite sure the manufacturer’s claim of up to 55in is feasible.
Great build quality with sturdy but neatly finished welds, it comes with all the fixings you could need and they even include a magnetic spirit level that stays put while you’re fitting the bracket!
And they throw in an HDMI cable
Highly recommended…
Thought I had ordered the wrong bracket as the bracket comes with brackets that fit across the TV, but after checking found that out TV was sturdy just with the back plate . TV’s are far lighter now a days . It’s an excellent bracket that is sturdy ,used the bolts and raw plugs supplied which were surprisingly good as you usually get cheap and nasty fixings . Like the way you can hide the cables around the back bracket . It has excellent movability ,and it perfect as you can push back the bracket against the wall when not in use . Highly recommend . Also comes with a small spirit level and HD lead which is unique .
I bouught this for a 42″ LED TV based on the glowing reviews but not really believing them, but they’re right. It’s a really sturdy bracket with a great range of movement and more screws and fittings than you could possibly need. It attaches reasuringly sturdily to the back of the TV and to the wall. My builder says he always buys his own fixings for something like this but was actually happy to use the supplied plugs and bolts – a hearty recommendation from a perfectionist. I love the sleeves along the arm that can be used to hold the cables in place and keep everything good and tidy. We have the TV positioned flat against the wall and ritated through nearly 90 degrees to watch when cooking – the arm is long enough to reach almost halfway across the 42″ TV and can be nicely adjusted to tilt and keep level. It is rock solid wherever the TV is.
It’s far and away the best TV bracket I have used.
I used this to hold up a 42 inch Samsung tv in the bedroom. Im not really any way DIY orientated but this was was relatively easy to install. The bolts used to hold it up are fairly sizeable so make sure you have the correct drill bit. The only negative comment I would make about the bracket are that the cable tidies are pretty useless and just fell off mine when I tried to use them. That’s a minor criticism though and so long as it keeps the tv up and provides a good range of motion (pretty much 90 degrees to the wall at full extension) I’m not going to mark it down for a few ineffective plastic cable tidies. Top product at less than half the price of the brackets sold in the local tv stores.
After doing a lot of research; the overwhelming amount of positive reviews for this product made my decision for me, and I am glad I did.
The Bracket arrived well-packaged, the instructions were clearly written and all of the bits you could ever possibly need were included.
After some serious drilling, the fixings provided (10cm screws!!) have ensured this is about as sturdy as you can get. In fact, my Carer who put it up actually believes it could support his weight entirely, although he didn’t put it to the test, and it certainly has no issue with the weight of my 40″ Samsung.
All in all, I recommend this highly, obviously I cannot vouch for its long term use yet, but there is nothing that I can see that is likely to fail or cause further problems.
For the price, it is genuinely a worthwhile buy; and it has all the movement one could possibly need for everyday use. I really recommend it.
Also, if you email the Company and register the device, you get a 25 year Warranty!! For less than 30 for the bracket, that is an amazing bonus, and well worth doing.
Seems very good quality. My only criticism is that the mounting holes are close together, making it harder to get a good fixing as drilling two 13mm holes in brick/thermalite block close together is not a good idea. It came with a cheap spirit level and an HDMI cable, neither of which I needed. More useful would have been a spreader plate to spread the fixing holes wider apart.
On the plus side, if you find a stud exactly where you want to hang it you might get a good fixing, otherwise you may need to fit a board first. Notwithstanding this it is pretty good and I have ordered a second one, and will use it on a thick plywood backing plate.
Great wall mount. Really can’t fault its sturdiness for 21… – great motion and I fixed to a stud with a home made plywood mount to give 36mm of ply to fix into. Impressed and the amount of fixings it gives you is unreal. Love how it’s as simple as attaching to the back of the TV and then keyhole slotting the tv onto the mount. I have a lot of power tools at my disposal so installing was a doddle. FYI it gives you coach screws and no normal screws so I stuck in a central 6.0x100mm wood screw and a bunch of 5.0x50mm wood screws with my impact driver. Being 36mm birch ply its not coming out anytime soon.
First of all let me say that this bracket is EASY to install for a beginner DIY’er like myself.
I have fixed a 46 inch TV to my bedroom wall and I was skeptical to see how small this bracket was but believe me when I say.. It’s absolutely SOLID!
There are easy to follow instructions included and in my attached photo I’ve shown what tools I used.
You get more than you bargain for with this bracket with the mini spirit level and HDMI lead included!
I would definitely recommend this bracket for a quick easy install and it only sits 12cm away so it looks nice and flush to the wall!
5 stars from me!
Excellent product does what I wanted it to do. Strong screws supplied adequate for the job appears well designed. Versatile fits a whole wide range of televisions from moderate through to very large I have confidence it will hold the weight.
Drilling the holes in the wall is the biggest issue. we put it on the chimney breast which has a concrete substructure with steel reinforcement. Fortunately I own an SDS drill which which was able to penetrate the reinforced concrete. That would not have been possible with a standard hammer drill. The spanner provided is completely inadequate to the job you simply cannot get the torque necessary to tighten the bolts into the wall. in the end I used a socket set wrench which worked fine. If you don’t own these things I suggest you find someone who does who is willing to help. It’s worth the cost of a takeaway and a bottle of wine to get someone to assist.
Whilst some might say “It’s a TV bracket, surely they’re all the same?”, they’d be wrong.
First of all, the instructions include pictures AND words. It makes it significantly easier to then understand what you’re supposed to do. If you’re a competent DIYer then you won’t even need the instructions, as it is so straight forward.
There are two stand-out features of this product that I doubt are even mentioned anywhere in the spec / listing, but are so incredibly useful:
1. You can adjust the level of the TV with two screws AFTER you have put the bracket on the wall. Yes, we all want to get the bracket on straight the first time, but if you catch the brick and the drill goes slightly off (or you’re just not very good at measuring level) then you will be very, very pleased for the range of motion to adjust the level on the back of the TV mount. Such a simple idea but brilliant.
2. When you want to mount the TV the bracket that is on the back of the TV ‘slots’ onto the wall mounted bracket. It is then held by two screws (the same two screws that can adjust the level (see point 1). This doesn’t sound much but have you ever tried to do up two screws whilst balancing a TV on your head if you’re doing the job by yourself? It is nearly impossible and risks you dropping the TV. Therefore, to have it where the TV slots on and then allows you to just steady it and do up the screws at the back without the fear of it falling off is again, a simple yet brilliant bit of design.
The bracket itself; sturdy, solid, well made and easy to pull out / adjust where you want the TV. It comes with wide variety of screws, spacers, washers and anything else you may need, so regardless of the size and shape of your TV you can get the mount to fit on well.
I’m sure there are cheaper mounts out there but you’ll be kicking yourself when the TV isn’t level and / or you’ve dropped it trying to put it up because the mount didn’t have the two features above. Furthermore, is it really worth ordering another to save a few quid when I can hand on heart say this is the bracket that does everything you want it to and a whole lot more.