Corsair Hydro X Series, iCUE XH303i RGB Custom Cooling Kit (XC7 RGB (115X/AM4), XD3 Pump/Reservoir Combo, XL5 Coolant, XR5 Radiator, 3 x SP120 RGB PRO Fans, iCUE Commander PRO, etc.) Black
XC7 RGB CPU Water Block
The XC7 RGB CPU Water Block combines premium nickel-plated copper construction and extreme cooling performance, compatible with Intel LGA 1200 and AMD AM4 sockets.
XD3 RGB Pump/Reservoir Combo
The XD3 RGB Pump/Reservoir Combo features a high-performance DDC PWM pump, integrated RGB lighting, and in-loop temperature sensor to drive even the most compact custom cooling systems.
Three Corsair SP120 RGB PWM Fans
Eight RGB LEDs per fan create vibrant lighting and visual effects to go along with powerful cooling.
Intelligently Controlled, Low-noise Custom Cooling
Push your system further with superior cooling performance coupled with remarkably quiet operation, intelligently controlled with an included iCUE Commander PRO Smart RGB Lighting and Fan Speed Controller and in-loop temperature sensor.
-
XR5 360mm Radiator
Delivers extreme custom cooling performance, with a 30mm radiator thickness and premium copper core.
-
The Tools You Need
An included Hacksaw, Tube Reamer, Silicone Rod, Tube Bending Mandrel and Sawing Clamp make it easy to cut, bend, and finish the tubing for those clean perfect tubing runs.
-
XT Hardline Tubing
Create stunning loops with crystal-clear PMMA tubing, easily cut and bent to your needs using the included saw and silicone insert.
-
XL5 Performance Coolant
Includes one liter of clear XL5 Performance Coolant to keep your loop running clean and cool, pre-mixed with anti-corrosion inhibitors.
-
Your Setup At Your Command
Corsair iCUE software enables complete control over your custom cooling loop. Create automated fan curves that adjust fan speeds based on your system’s thermals, and customise dynamic RGB lighting.
| Dimensions: | 51.5 x 21.5 x 30 cm; 6.76 Kilograms |
| Model: | CX-9070004-WW |
| Manufacture: | Corsair |
| Origin: | Taiwan |
Sehr zu friede
Top Qualitt hat alles gepasst
Khlt sehr gut und sieht dabei auch noch geil aus
Merci corsai
Voila des annes que je cherchait a faire un watercoling custom,
j’ai pris le temps de la rflexion regard tuto sur tuto ,
pour arriv sur ce kit qui n’est pas forcement le moins chre de base ,
mais qui apporte un suivit pice et option plus confortable sur le long terme.
je suis tomb avec le temps sur la chaine de JayzTwoCents qui a mont se quitte le mettant en avant pour ceux qui dbute dans le watercoling custom, et aprs mure rflexion j’ai opt pour se kit plutt que du Termaltek ou autre beaucoup plus abordable.
la photo parle d’elle mme j’ai opt pour le nouveau boitier 011 Dynamic evo avec une carte graphique mont en verticale. ce qui ma permit plus de fantaisie dans le tubing.
le gain en temprature n’est plus a mtre en avant ce qui ressort le plus c’est le silence obtenue si on a une config gourmande qui ventile beaucoup.
mon conseil regard bien toute vido sur le sujet prenez le temps de savoir pourquoi vous voulez franchir le cape.
le kit Corsair n’est pas mon premier choix , mais celui qui rpondais le mieux a mes aptitude et attende dans se projet.
Absolutely add life to my build, beautiful addon to a gaming desktop, might not be a faint of heart for the extra effort or the extra money for everyone, nor does everyone like RGB, but definitely add a new level of aesthetically pleasing comparing to good old Air cool or even AIO in my perspective.
Absolutely add life to my build, beautiful addon to a gaming desktop, might not be a faint of heart for the extra effort or the extra money for everyone, nor does everyone like RGB, but definitely add a new level of aesthetically pleasing comparing to good old Air cool or even AIO in my perspective.
This kit came with everything I needed and even had extra hard tubes for mistakes etc. Very well packaged and each part comes with instructions. Only downside and why I’m not giving 5-Stars is the rusted radiator like some other people received as well. Not sure why these are rusted or why Corsair isn’t doing a proper QA with the radiator but overall this kit was 4-Stars.
This kit came with everything I needed and even had extra hard tubes for mistakes etc. Very well packaged and each part comes with instructions. Only downside and why I’m not giving 5-Stars is the rusted radiator like some other people received as well. Not sure why these are rusted or why Corsair isn’t doing a proper QA with the radiator but overall this kit was 4-Stars.
Solide Kühlleistung- einfacher Einbau, auch für Einsteige
Sehr einfache Montage und es ist bis auf die Heiluftpistole alles dabei. Temperatur nicht zu hei einstellen und gengend Abstand halten. Ich empfehle jedoch eine Gehrungsschneidlade mit Sge (s. Bild, ca. 10 Euro), da bei mir die Enden allesamt schrg wurden mit dem Corsair-Set. Ein Rohrschneider hat bei mir nicht funktioniert (PMMA bricht dabei). War auf Anhieb alles dicht. Khlleistung 12-15 C besser als mit dem H100i pro und sieht 1000x besser aus. Die Anleitung von Corsair ist kurz, es gibt jedoch unzhlige Videos dazu auf den bekannten Plattformen. Ich kann es nur empfehlen! Und der Einbau macht sogar Spa!
This is my personal recommendation for this water cooling kit, which is very convenient for beginners to install. If there is a 240 cold row version, it can be used when assembling the itx case.
This is my personal recommendation for this water cooling kit, which is very convenient for beginners to install. If there is a 240 cold row version, it can be used when assembling the itx case.
I’ve seen a few posts concerned about the radiators. This is completely normal. It’s not rust copper does not oxidize THIS IS NOT RUST copper has little to no iron its called patina and its a layer formed on copper from moisture and is almost impossible to stop its 100 percent safe to use and does not flake off. Cheers! Have fun with this sweet kit!!
Great cooler but may need to replace the thermal paste
The first hard line cooling install.
The kit includes everything you need to build your own bespoke hard line cooling system, except the heat gun.
Expensive, but a nice kit that has all you need
Great kit with all the stuff you need to cool your CPU with couplings and connectors for an extra device. I havent actually used the CPU block yet, but put my GPU on the loop.
Quality materials all-round.
Bin zufriede
Kostet bisschen was aber tut was es soll, sogar besser als erwartet.
Ich empfehle jedem gleich ein geeignetes Kugelventil und G1/4″ Doppelnippel mit Aussengewinde zuzukaufen um in Zukunft die Flssigkeit einfacher auslassen zu knnen.
Messing und Alu nicht mischen!
Expensive for only lower my temps by 2c, with no overclock or excessive load on my rig. Max temp reduction I could achieve was about 6 c running pump and fans at 100%. System is fully bled, but still underwhelming cooling performance from a 360 rad.
Expensive for only lower my temps by 2c, with no overclock or excessive load on my rig. Max temp reduction I could achieve was about 6 c running pump and fans at 100%. System is fully bled, but still underwhelming cooling performance from a 360 rad.
merci
vu l annulation de la carte mre arriv en mauvaise tat je suis dans l obligation de retourn l’article
Sistema de enfriamiento Custom
El kit viene completo, tiene todo lo necesario para la instalacin. Lo difcil es que no te indica como integrar el commander con el hub y demas componentes, por lo que para usuarios sin experiencia puede llegar a ser dificil, tendrn que investigar mas.
Es bastante divertido ensamblar el enfriamiento, pero NOTA, se requiere pistola de aire caliente, li vas a comprar este kit considera que puedes gastar otros 50 dlares en la pistola.
En cuanto a la calidad del producto, es muy buena, con buenos materiales y acabados.
Los contras: el precio de mas de 500 dlares, faltan las gomas de los ventiladores para evitar vibraciones.
En general si lo recomiendo si tiene el dinero para comprarlo, mantiene el cpu super frio
CoolSair!
Excellent beginner kit for someone wanting to venture into water cooling. Used this to do a full water loop with and Alphacool GPU block and a Corsair NVME block, Added an extra 120mm rad into the mix as well and the temps stay well below what they would get to using an AIO or just fans. Reducing any thermal throttling on the gpu and CPU when overclocking
Bonjour,
J’ai achet la version XH303I aprs quelques jours je peux vous donner mon avis sur ce kit.
Attention finalement j ai mis les ventillo fourni a part, ceux sur le radiateur ne sont pas d origine
Dj pour commencer ma config dans les grandes lignes.
Ryzen 7 5800x (connu pour chauffer un peu plus que la moyen).
m.2 et gpu 3080 ti
Le tous dans un boitier lian pc011 dynamic, trs beau boitier mais doublement vitr donc j’avais besoin d’un bon watercooling !!!
1/ le dballage.
Habituer des watercooling AIO, c’est mon premier faire soit mme, je dois dire que la qualit est l, trs bien emballer, chaque composant est protg, il y a suffisamment de tuyau pour commettre quelques erreurs, bref on en a pour son argent.
2/ montage
Corsair a suffisamment de tuto sur le net pour ce faire aider, aprs le modle XH303I est assez peu reprsent (c est le petit bloc pompe/rservoir, pratique sur les petits boitiers).
Bref la phase montage (hors tuyaux) est relativement facile, la seule difficult je pense est de bien installer vos autres ventilateurs et aussi de placer la carte graphique afin de ne pas faire l’erreur de tous installer et ensuite s’apercevoir que la carte graphique touchera les tuyaux.
Pour ma part j’ai install mes 3 ventillo acheter a ct + juste insrer la carte graphique, afin de pr visualis l’emplacement des futur tuyaux.
3/le thermoformage des tuyaux.
C’tait une premire, j’ai pass un peu de temps et quelques galres pour les coudes mais le matriel fourni avec le kit est complet, pour ma part je n’ai pas utilis la mini scie car je trouve qu’elle est pas prcise, j’avais un vrai coupe tuyau qui m’a fais gagner du temps je pense.
Dcapeur obligatoire, ne le faite pas au sche-cheveux !
Aller y en douceur, une fois que le tuyau est souple on a un peu de temps avant qu’il redevienne dur
4/la **mise en eau**
Merci a Corsair d’avoir fourni de quoi lancer la pompe sans faire de bidouille, en gros vous avez juste a mettre brancher l’alim, a mettre sur le cble pour la carte mre l’embout fourni et vous pouvez en appuyant directement sur le bouton de l’alim lancer la pompe.
Cette phase a t un vrai plaisir, voir le liquide circuler (et surtout de ne pas avoir de fuite) !
5/ Paramtrage.
J’ai un peu galr avec leur logiciel ICUE mais aprs avoir regarder par mal de tuto j’ai russi avoir un trs bon rapport bruit / refroidissement.
En bureautique je suis en 40 degrs, en jeu je pense a 60/70 suivant les jeux, j avouerai que le boitier n aide clairement pas et que j’habite Toulouse (tester en ce moment donc plein t !)
Je trouve que ce sont de bonne temprature pour mon processeur.
Bref que du bon pour le moment, je mettrai jour mon avis si soucis !!
Merci de m’avoir lus n hsiter pas a me le faire savoir si c tais utile.
Hard but pleasing
It was first time for me to set up a custom loop and it was harder than I thought.
The acrylic tubes are very tedious to work with, but the finished look of right angle and cut is just so pleasing.
Ps: I had to buy 6 more 14mm tube..
First time installing water cooling. Kit has everything for install of a single cpu, and rad. Had to purchase additional rad and fittings to install additional 360 mm and 140 mm rad. If video card doesn't come with a water block,, you will need one as well. Pump has no problems with the added rads. Make sure that if this is your first time installing water cooling, buy more tubing as I did and don't be upset if you mess up one or two tubes. Cones with the leading process. Make sure to water test before adding power to motherboard. System runs under full load (benchmark test 1 hour+) 65 - 70 C on junction with overclocked cpu (ryzen 9 5950 4.5 ghz) and over clocked gpu (Radeon rx 6900 xt)
First time installing water cooling. Kit has everything for install of a single cpu, and rad. Had to purchase additional rad and fittings to install additional 360 mm and 140 mm rad. If video card doesn’t come with a water block,, you will need one as well. Pump has no problems with the added rads. Make sure that if this is your first time installing water cooling, buy more tubing as I did and don’t be upset if you mess up one or two tubes. Cones with the leading process. Make sure to water test before adding power to motherboard. System runs under full load (benchmark test 1 hour+) 65 – 70 C on junction with overclocked cpu (ryzen 9 5950 4.5 ghz) and over clocked gpu (Radeon rx 6900 xt)
Corsair XH303i
Apatentemente Por el momento no me a dado ninguna falla, por el momento todo marcha bien y espero q asi siga , el producto es muy bueno y vaya que enfria mi procesador que es un ryzen 3900x de 12 nucleos , tenia el enfriamiento ryugin asus y la temperatura estaba entre los 35 a los 42 grados y con este enfriamiento de corsair la temperatura se mantiene entre los 25 y 30 grados ,super frio el procesador , muy recomendable(si quieren q la temperatura baje mas hagan que el agua circule en tubos mas largos para q el agua fria se mantenga mas tiempo corriendo y la caliente se enfrie con mas rapidez )
so happy to have purchased this worth every penny for the noise level alone but a major plus is having an overclocked 3950x running at 48c idle to 72c under load
so happy to have purchased this worth every penny for the noise level alone but a major plus is having an overclocked 3950x running at 48c idle to 72c under load
Just the tip.
Great kit, went from 50 degrees to around 30 degrees Celsius at the CPU.
Only 2 things I disliked.
1: When filling your reservoir with coolant… take the tip of the filler off. It fell off in my reservoir and took me longer to get it out than to fit the pipe.
2: I tried every way (I used to install pipe on submarines) to cut the pipe, it would either break or cut slanted.. best way I’ve found is with an air/electric grinder with a cutting wheel.
This was my first PC build and my philosophy was go big or go home! I originally was just going to replace my GPU, and picked up a RTX 3090, but things quickly snowballed from there. What was meant to be a simple GPU switch out, turned into completely redoing my rig except for my motherboard and PCU. Since I got a new case and new RGB RAM I decided that I would try doing hardline PC cooling. The Corsair Hydro X system along with a generous amount of YouTube and here are the results! I only comment is, if you are considering this make sure you plan it out well and make sure you have enough fittings to accomplish the loop you want. Long story short, this is a great product and pretty easy to install.
Looks great. Runs great. Keeps everything nice and cool. I love the way it looks and runs effortlessly.
El producto se ve muy bien estticamente si eres de Mexico, ten cuidado los tubos son de medidas 10mm de circunferencia interna y 14 mm de circunferencia externa por lo que el tubo es bastante grueso, ese tipo de tubos no los vas a encontrar fcilmente y son MUY CORTOS!
Opte por comprar los tubos 10mm interno 12mm externo con los Hydro X 12mm OD por que el tipo era muy pequeo y no alcanzaba.
La temperatura que me dio fue bastante alta eso no me agrad, teniendo temperaturas sobre los 50 a 55 en juegos, cosa que se me hace increblemente alto ya que el sistema H150i Elite Capellix ofrece temperaturas de NO MS DE 35 en uso total de la CPU! Lo malo del Elite Capellix es que su diseo no estn esttico.
EN GENERAL;
Lo bueno del producto es:
-Primeramente Estetica
-Incluye todo lo necesario para tu primer bucle
Problemas;
-Los tubos incluidos son muy cortos incluso para el gabinete 5000X de Corsair, anteriormente tena el Cosmos II
-El armado no es tan sencillo, el calentar los tubos es fcil cualquiera lo hace lo que se complica son las medidas exactas y estar poniendo y quitando todo
-Los OD incluidos estn contados y puede que te hagan falta
-LAS TEMPERATURAS oscilan sobre los 50 Grados en juegos, tema a considerar si lo que buscas es mejorar la temperatura, para ello te recomiendo el Elite Capellix H150i que ofrece un rendimiento sin precedentes algo incomparable
Amazing proformance
My pc is now 10c cooler under heavy load, im very happy with this kit, it has everything you need, its a little tricky to get going, but once you have done a couple pipes, its easy
Parfai
C’tait mon premier water cooling custom et le kit est super complet et d’excellente qualit, prvoir simplement d’acheter un set de tubes en plus si c’est votre premire fois car on gche beaucoup avant d’arriver la bonne forme.
Au niveau bruit la pompe est inaudible, les ventilos sont efficaces et silencieux
Le RGB est splendide (bon courage avec le cable management…)
En temprature j’ai perdu 20 en idle et 28 en charge sur Ryzen 5800X (je suis pass sur mtal liquide au passage – conductonaut)
Un conseil, prenez le temps de regarder un maximum de tutos sur YouTube avant de vous lancer…
Great bundle and comes with everything you need. They have made it as easy as possible to create your own water cooled system.
Good quality parts and the seals on the fittings are good. Comes with good number of pipe to make a few mistakes here and there. Plenty of coolant to fill the system.
A few things to note, if you’re using the Corsair water cooling wizard, it may say that it is compatible and it certainly is. However, the amount of space to work in may be very very limited!! It mentioned I could have two radiator so I purchased another and trying to fit everything in was quite difficult. Maybe easier for those who have more experience to doing this but rather hard for beginners.
I found the hacksaw not very good and my cuts were always slanted.. probably my poor DIY.
Measuring hard-line bends and distances harder than it looks and more of an art due to tight spots, hence why my tubing doesn’t look very straight.
The system is completely quiet once all in place. Commander pro kept updating for a while and now settled down. Have to manually adjust pump and fans.
Overall, happy with the product but do allow lots of time and patience. Will give it another go to get some better runs and probably upgrade case also. I installed in Corsair 4000x
So this kit was VERY well thought out. I built it into a Thermaltake Tower 900 as I really like the design of the case. Very easy to understand the couplers that join the hard tube with the elbows/connectors. The reasons I gave it a 4 star are:
1. I ended up having to order 4, 90 degree elbows to make this work. This kit didn’t come with a you block and without those short runs, it expects to have 3-4 bends in a single pipe which makes it extremely hard to get every bend perfect. I feel that for a $600 kit, they should have included at LEAST a pair of 90 degree tube to tube connectors.
2. The res has two wires for LED that come out of the top. You can’t remove them and it looks ugly without gluing them to the side of the res tower for a clean install.
3. Pump/res combo has only one port where you can have it exit. It would be super awesome to be able to have more than one out port where you can block off one for a super clean install. Or be able to rotate the top of the res cap so that the input and output can go to the rear.
Other than that, it looks super cool, doesn’t leak, rob fans are incredibly quiet and keeps my 5900X under control.
Their marketing doesn’t really help you identify the correct additional parts. Everything is named HydroX series… make sure to look at the outer diameter of the piping. I got a 14mm and ended up waiting a few more days to get the correct elbows. Not exactly stupid proof for beginners.
Want to see them come up with a couple of water blocks for the different 3070 gpus and I’ll buy another set of tubes, rad, fans, pump etc for the other side to have two separate loops.
I love this custom water loop kit, it was my first attempt at a custom loop which was difficult so the loop don’t look like I planned, Before I was getting temps of 80+ air cooled playing Cold War in 4k max settings and now with the hx303i I’m in the mid 50s
I ordered more tubing I got the hang of bending so I’m going to attempt to run the loop as originally planned
The pump is not too noisy
I definitely recommend
It is the best watercooler ever. It soooo silent that I barely notice it was on. It makes my Ryzen 9 5950x stays in 42C, what is unbelivable. It’s RGB combines with my GeForce RTX 3090 FTW3 Ultra. It was hard to find, there’s none in Brazil, s I had to change my region to USA and pay almost 700 dollars in taxes, but this product worth the price. Recommend to everyone. You won’t regreat buying it.
Also wie soll ich es sagen. Es ist meine aller erste Custom Wasserkhlung und hatte echt probleme beim Biegen der Hard Tube’s. Aber nach dem ich alle 6 verballert habe hat es funktioniert. Naja zwar nicht so schn wie ich es mir vorgestellt habe aber immer hin. Die Khleistung ist auch drastig gesunken. Hatte vorher die ASUS ROG Ryujin 360 Aio mit Fligmetall gekhlt. Im IDL lag es bei 33C und in games ber 60C. Mit der Corsair ganz anders. Normale Wrmeleitpaste liegt die IDL bei 28C und in games nicht mal 55C. Gekhlt wird ein Ryzen 9 3900x auf 4,1Ghz all core. Bei Prime 95 lag die Temp bei etwa 60C (laufzeit zirka 1 stunde) Spter wird noch meine 2080ti mit der Wak und ein zustzlichen radi verbunden. Denke mal aber das ich auf Softtube’s umsteige muss man net so krampfhaft biegen. Deshalb ein Stern abzug wegen dem biegen. Ok die Qualitt ist echt lcherlich vom Video
Love it . First time doing hard pipe bending . Not to bad just takes practice
Love it . First time doing hard pipe bending . Not to bad just takes practice
Empfehlenswe
Das Set ist auf jeden Fall praktisch da ist alles dabei,die Sge und die Rohrbefestigung zum Sgen ist nach paar Rohre Sgen schon unbrauchbar. Wasserpumpe war bei mir nach Inbetriebnahme undicht, aber der Rest hat gepasst. Nach erneuten abdichten der Pumpe ging es dann und die Pumpe ist sehr still. Auf jeden Fall empfehlenswert.
It is one great product if you know what you are doing, and what to expect.
If you want to do a custom loop just for CPU and have an expectation of the custom loop thermally being better than AIO, No it will not. if you plan to have a custom loop for CPU and GPU at the same time, you will have an amazing experience. The pump and CPU block is very sturdy and well built. the pump has up to 4500rmp and it is dead quite up to 3000 rpm which is more than enough for daily use.
Bought this kit for my first custom loop and wow I'm amazed at how easy it was to put this all together and once you get the hang of bending the tubes its a lot of fun just remember to buy a heatgun as this does not come with one!
Bought this kit for my first custom loop and wow I’m amazed at how easy it was to put this all together and once you get the hang of bending the tubes its a lot of fun just remember to buy a heatgun as this does not come with one!
14 yr old first liquid cooled pc build. The kit has every thing needed to start, except the heat gun and additional fittings.
14 yr old first liquid cooled pc build. The kit has every thing needed to start, except the heat gun and additional fittings.
…seit langem.
Habe die Komponenten vorerst mit 16/10 Schluche verbunden da ich noch eine Distro Plate und eine GPU mit Wasserblock verbauen mchte sobald die Mondpreise sich bei den GPU’s gelegt haben.
Dann werde ich die HT Rohre biegen und verbauen.
Die Pumpe ist sehr laufruhig und leise besonders gut kommt auch die RGB Beleuchtung rber die man mittels iCUE sehr gut einstellen und verwalten kann.
Fittinge habe ich vorerst von Byski verwendet die absolut Top sind und preislich viel gnstiger sind als so manche anderen Hersteller.
Desweiteren habe ich noch einen zweiten 360er Radiator oben verbaut der mit gnstigen Arctic Lfter gekhlt wird und einen kleinen 120er Radiator mit einem Alpenfhn Silent Wing gekhlt, habe ich hinten verbaut der zwar nicht ganz so viel bringt aber wenn Platz ist warum nicht besser als nix 🙂
Zur Wak kann ich nur sagen alles tip top verpackt und wrde ich sofort wieder kaufen fr den Preis voll zufrieden.
This was my first time Watercooling a PC, always wanted to do it. Corsair made that process nice and easy. Affordable for what you get in the kit to start your process. I personally added a Waterblock to my GPU from another Company and they worked together flawlessly. Keep in mind that you will need to get additional fittings and other various components to add in a video card or other features, as this kit comes with just enough for a CPU only. The kit does not come with a Drain valve, so make sure to get one, or plan out how you will drain off one of the additional Pump/Res inputs. I would have thought a drain valve would be included but was surprised it didn’t.
Reminder Tip: don’t forget a drain port! You will thank yourself later for putting one in.
Excellent ki
Le kit est d’une qualit irrprochable, pas donn chez Corsair mais a en vaut la chandelle. Fonctionne parfaitement, c’est silencieux, beau et efficace. Un peu touchy pour couder les tuyaux en PMMA mais en prenant son temps a le fait !
Sehr gut 👌🏽
Gute Verarbeitung, tolle Komponenten macht Spa mit sowas zu arbeite
For a first time builder of a custom water loop I have to say I’m pretty pleased with this kit. It comes with nearly everything you need to build your loop. I say nearly everything because it doesn’t come with a heat gun to bend the tubes; but a $20 Wagner will take care of that. Bending the tubes is a mix of art, science and patience. I really like the way my setup turned out and would definitely recommend this to someone looking to get into custom water cooling.
For a first time builder of a custom water loop I have to say I’m pretty pleased with this kit. It comes with nearly everything you need to build your loop. I say nearly everything because it doesn’t come with a heat gun to bend the tubes; but a $20 Wagner will take care of that. Bending the tubes is a mix of art, science and patience. I really like the way my setup turned out and would definitely recommend this to someone looking to get into custom water cooling.
Der Einbau war wirklich gut. Man bekommt wirklich alles was man bentigt. Das war meine erste WaK und die Tubes haben trotz mancher Fehlversuche gereicht, habe jetzt noch eine Stange ber.
Das einzige Problem ist die Befllflasche, Corsair WTF?? Vorne am Schlauch die “Dse”, so nenne ich es jetzt mal, ist nur auf den Schlauch gesteckt. Wollte nach dem 2. befllen den Schlauch herausziehen und was passiert? Die Dse fllt ab und landet im Ausgleichsbehlter, Weltklasse! Fisch das Teil aus der kleinen ffnung oben erstmal wieder raus, da bekommste richtig Spa sag ich euch! Nach einer Operation mit Pinzette und Garn (damit die Pinzette nicht auch noch da drinnen landet) habe ich es dann wieder heraus bekommen – Glck gehabt..
Sonst wie gesagt, alles in allem ein Rund um Sorglos Paket.
ès bon produi
pompe et tauyau en dure trs bien mais attention a ne pas essayer de faire sa au seche cheveux ( decapeur termique obligatoire) mais sinon rsultat trs beau .
This was my first PC build and first hard line cooling install.
The kit comes complete with everything you need minus the heat gun to create your own custom hard line cooling system.
All parts were carefully packaged and organized. Instructions were pretty vague, but enough to get everything hooked up.
Die Montage war sehr leicht und es gab nahe zu keine Komplikationen, mit der Kabellnge hatte ich dennoch an manchen Stellen Probleme.
Es sind genug Rohre vorhanden, um trotz Fehler alles zu verbinden (~ 100cm Ausschuss und ~80cm Rest, davon eine Ganze Stange).
Kleiner Hinweis meinerseits:
Zuerst die Ventilatoren an dem Radiator befestigen bzw. austeste
The setup is not easy there’s a certain amount of trial and error until you are able to bend the pipe correctly so I would advice you watch some YouTube videos on the matter first but I’m pretty sure you will. You can always opt by the rubber hose system but I would advice against as I have used a coloured cooling solution and the rubber got dark the acrylic pipe did not change colour.
It takes time and hard work but the final result is definitely worth it.