ELEGOO Mercury Plus 2 in 1 Wash and Curing Machine for LCD/DLP/SLA 3D Printed Models Resin UV Curing Box for Mars Series Photon S Photon Mono with Rotary Curing Turntable and Washing Bucket
ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine
ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine
Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs.
ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine
Operation Instructions:
- After the model is printed, please clean and blow-dry the model before putting it into the machine.
- If the model become yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.
- Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
- Please do not use it for more than 40 minutes at a time to avoid overheating
ELEGOO Wash & Cure Machine
Technical Specification:
- Control Method: Touch button
- Rated Power: 48W
- Input Voltage: 110V/220V 50/60H
- UV Light: 385nm+405nm（8+8）
- Time Setting: 0-30mins
- Machine Size: 200mm*200mm*352mm
- Maximum Wash Volume: 125mm*85mm*160mm
- Maximum Curing Size: φ140*165mm
- Machine Net Weight: 4.8kg
- Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
- Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine
| | | |
|---|---|---|
Washing with Printing PlatfromIf the printed model is not removed from the build platform, please mount the build platform to the adjustable platform bracket (The height of the platform bracket can be adjusted to fit the liquid level in the bucket, up to a maximum model height of 120 mm), then hang the adjustable platform bracket on top of the pillar to start the cleaning. | Washing with BucketIf the printed model has been removed from the build platform already, you will need to place the model in the cleaning basket (maximum model height is 160 mm) and hang the cleaning basket on top of the pillar to start cleaning the model. Models larger than 15 mm in size are available with this cleaning option. Some small models can be cleaned together in the bucket. | Intelligent Curing ControlPlace the curing turntable firmly against the turntable positioning hole and place the model on the center of it. Cover the anti-UV lid which can block 99.95% of ultraviolet rays to protect your vision. Operating with the sensitive touch button and 0.96 inch TFT LCD screen, you can easily set and monitor the time. The machine will beep when the curing is done. |
| | | |
|---|---|---|
| The height of the platform bracket can be adjusted to fit the liquid level in the bucket to make the models to be cleaned completely. | Powerful UV Light of the built-in 8pcs 385nm and 8pcs 405nm UV curing lamp beads to cure the model fast. | The 360-degree rotating turntable work with UV light can make the models to be cured perfectly. |
ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine
| Dimensions: | 50 x 27.5 x 27 cm; 4.8 Kilograms |
| Manufacture: | ELEGOO |
| Origin: | China |
| Reference: | EL-3D-090 |
Great machine!
Well packaged, easy to set up and use! There’s a slight lack of information on how long to use the wash or cure settings but there are plenty of videos and info online.
Speeds up work flow
This has really help speed up my personal work flow, easy to set up and use. A good upgrade from my home made curing station.
Nice cleaning statio
Really simple to use and removes the need to get covered in leftover resin. The parts are so easy to clean with this
Quick, efficient, effective
Really speeds up the cleaning process for models. Effective and easy to use. When I needed support with something I damaged, customer support were very helpful.
Wash station is a must addition to your set up ;)
I got my ELEGOO Mars 2 Mono in December and did my first prints. One thing that became clear very quick, was the fact that the washing was a mission and also created a huge mess. It almost put me off 3D printing. I had seen these wash stations on other artists videos and did some more research and took a chance and got one. BEST DECISION EVER!!!!! No mess, no fuss and the results are so good. Super simple to use which gives me more time to focus on the 3D side of things.
Having the wash and the cure in one machine is really awesome. It doesn’t take up a lot of space and is such a power house for me to bring my prints up to that high quality standard.
Without this machine I would have probably gave up on 3D printing or maybe just done 1 print ever now and then but, because its so good i am printing daily. Super happy i pulled the trigger and got one 🙂
Makes Resin Printing so Much Easie
I’ve used the wash and cure for 6 months now and it just makes life so much easier – the option to use either the cage or mount the build plate for washing is espcially helpful.
Great produc
Great product, easy to use and the customer service is great. Wouldn’t hesitate to buy more products from elegoo
Elegoo mercury perfect and dose the job need it to
Good value for money and best offer aswell works perfect and just what needed yo go along with elegoo mars 2 resin printe
Makes post processing much simpler and cleane
I purchased this to go along with my Elegoo Mars pro over 6 months ago and was very satisfied. As someone new to SLA printing, having this compact and tidy station for post processing made it a much simpler undertaking. Now with a bit more experience i would recommend it to anyone looking to get a SLA printer, even now with more confidence it just makes the whole process quicker and cleaner.
Makes post processing much simpler and cleane
I purchased this to go along with my Elegoo Mars pro over 6 months ago and was very satisfied. As someone new to SLA printing, having this compact and tidy station for post processing made it a much simpler undertaking. Now with a bit more experience i would recommend it to anyone looking to get a SLA printer, even now with more confidence it just makes the whole process quicker and cleaner.
Excelle
Excellent quality and makes life so much easier than washing manually and waiting hours to cure
Wouldn't be without i
Speeds up the whole cleaning and curing process, built in turntable for curing it is a nice tidy machine
Useful gadget for 3D printer users.
We’re still new to 3D printing having only bought our Elegoo Mars 2 and this wash/cure machine in the last few days.
It certainly seems to wash prints well when placed in the basket lowered into the washing “bucket” which features a rotating agitator. I think the agitator changes direction every 30 seconds.
We’ve only created few small prints so far, and I notice that although you can wash whilst the object is still on the build plate, the mounting bracket provided to support the plate assembly doesn’t let it lower more than half way into the bucket – meaning that we probably need to add more cleaning IPA than the 1 litre I bought (the bucket takes up to 3 litres). The bucket is supplied with a lid which seals with clips, I’m not totally confident that these clips will survive many repetitions of open/close.
The curing process seems to work well, with the object placed on a turntable.
The unit has a safety feature preventing it from operating in either mode without the lid in place.
Great bit of ki
Really good bit of kit. Has helped me iron out my process with printing from me elegoo mars pro 2
Fantastic quality and easy to use!
I am relatively new to the world of 3D printing, but since I started my Elegoo Mercury Plus has been a constantly reliable stable-mate with my Elegoo Mars Pro.
I use Elegoo grey Water Washable polymer resin and find that the process of printing and then washing and curing, not only seamless, but also strangely therapeutic too!
The Elegoo Mercury Plus is ideal for beginners and experienced creatives alike. It’s economical and sits proudly next to my 3D printer.
Fantastic quality and easy to use!
I am relatively new to the world of 3D printing, but since I started my Elegoo Mercury Plus has been a constantly reliable stable-mate with my Elegoo Mars Pro.
I use Elegoo grey Water Washable polymer resin and find that the process of printing and then washing and curing, not only seamless, but also strangely therapeutic too!
The Elegoo Mercury Plus is ideal for beginners and experienced creatives alike. It’s economical and sits proudly next to my 3D printer.
great tool
eally great tool to help with cleaning and curing your resin print. yes you can do without if you need to but this makes it so quick and simple why would you want to do without.
Makes a world off difference
Washing and curing prints was always my last favourite part of resin printing… Not any more. The wash station makes the job so much easier and less messy. I can transfer the whole build plate into the tub and wash it… Can’t recommend ebough
Quality clea
What a great bit of kit! Easy to use and really good quality clean for your prints. And a fast cure. Very very happy
Great little machine, totally worth getting
Highly recommend, makes cleanup a dream to do, just remember to buy plenty of the appropriate cleaning fluid (IPA etc)
Not perfectly suited to Elegoo Satu
Ordered as part of a recommended bundle with a Elegoo Saturn Printer, the print bed however is too big to attach directly to this so prints need to be removed before washing which is frustrating.
Wash function is not grea
Propeller at the bottom gets stuck mid clean, have tried many different ways of fixing, including ditching over 2 litres of isopropyl alcohol.
Cute function is great though.
Clean up process made easy
I love this product it makes 3d printing a lot less messy. Only down side the lid to the water pot broke almost right away.
ELEGOO Mercury Plus 2 in 1 Wash and Curing Machine
my review is if you havent got one buy it now god send
makes resin printing much cleaner and injoyable i would be lost with
this now and the price as allways be good .the count down timers for the uv light and wash
are great can be set up to a good 15 min parts come out clean in ipa ..it would be great if you could locally
get more plastic containers to put diffrent liqards into ..but well tested a honest review.its amust these days when you buy a resin printer..
Essential
After printing for about 6 months washing with a little brush in a pickle jar and curing in a nail light can honestly say this is revolutionary!
So much time saved and so much cleaner and tidier overall with better cured prints
Great machine
Bought this and the green machine for a present. Recipient reports they work really well. Had an issue with the motherboard, tech support were responsive, helpful and sent a replacement board out within 2 days of us contacting them. Really impressed.
Works perfectly
I now couldn’t be printing without it. Save so much time and hassle it’s unreal!
Great product and even better customer service
Amazon prime day is a great way for you to explore more of your interests and hobbies (at least that’s what I think) and this year was no exception with the purchase of the Elegoo Mars 2 Pro and the Elegoo Mercury 2 in 1 wash station.
I’ve previously been using an FDM 3D printer for the last year and with it has come a lot of frustration and learning, but after having recently viewed a number of reviews on resin 3D printing on YouTube I thought why not give it a try. And so far I have not been disappointed. Resin printing has a totally new workflow to it compared to normal filament printing but once you get used to it, its worth the extra steps. The Elegoo products are well made and so far (touch wood) I have had no major issues, so would recommend their products to anyone wanting to get in to this new world of 3D printing.
Key Points & Recommendations –
– I purchased the Elegoo water wash resin to save money on IPA and so far the print quality has been great
– Purchase and install a flex plate it makes removal of the print so much easier
Customer Service – Exceptional service and quick turn around – plus a bottle of resin as compensation
Since being delivered there has only been one fault which was a large scratch on the yellow shroud which comes with the Mercury wash and cure station. While this doesn’t affect the operation of the machine, I was slightly disappointed that it was sent out like this. After having contacted Elegoo customer services I can say that they offer exceptional service and have now offered to replace the shroud and also send me a bottle of resin as compensation. All I can say is that this is great customer service and would recommend them to anyone looking to buy their product.
Amazing bit of ki
I could not imagine going back to doing all my resin cleang by hand.
Using the wash & curing station has made this hobby at least for me far more cleaner / safe and more pleasurable.
So easy to use
Love it! Washing and curing is so easy with this. It’s a great size and honestly can’t complain. Bit pricey but more than worth it for the ease
Great 2 in one unit.
A simple and user friendly wash and cure station, equipped with either basket for released models to dip, or a bracket to hang the printing platform from.
Mercury wash n cure
Nice little machine does what it is meant to do can’t fault i
Cleans and cures
Does what it says, without the normal mess if you’re doing it manually. I wish there was a way you could buy a 2nd tub for the cleaning but overall well worth the money. Pleased with it loads.
Great!
Super easy to use land very intuitive. Curing takes just a couple of minutes. It doesn’t come with the IPA but tbf it’s a relatively cheap piece of kit considering it works so well.
essential bit of ki
The design of the machine is amazing but and it washes my models well and with my Mars Pro 2 printer the option to clean without removing it from the build plate is a godsend!
My only gripe is that when swapping over I have bits laying about, it doesnt take long to do and is hardly a chore but I’d rather have an in and out wash to cure, but for just starting with SLA so far I love it!
Better than sliced bread
Saves me having to fiddle around curing my 3D prints, haven’t tried it on normal resin only water washable, as the cleaning part is not compatible with water washing.
It's worth it.
Good all in one unit from Elegoo and compliments the Elegoo Mars Pro. Cleaning and curing in one unit saves all the clutter on the workspace and does a good job too.
Great change to 3d printing.
Definitely recommend. A lot of money but makes 3d printing easier to wash and cure. “Must have” for resin printing.
Makes 3D resin printing cleanup easy
This is a solid addition to my 3D resin printing process. Much easier and less mess. Its maybe a bit of a luxury when washing and curing can be done without it but for me the expense was well worth it and make the whole process much more enjoyable
Good and Nearly there..... but needs a tweak
I know it’s aimed at Anycubic printers, but think a more universal hook for washing would’ve been a big plus!!
Washes OK, but wish it swaped direction more to increase agitation.
Curing works well with the dual “colour” leds, to cover multiple wavelengths.
Has a safety cut off, so will not upgrade without the lid on.
Good and Nearly there..... but needs a tweak
I know it’s aimed at Anycubic printers, but think a more universal hook for washing would’ve been a big plus!!
Washes OK, but wish it swaped direction more to increase agitation.
Curing works well with the dual “colour” leds, to cover multiple wavelengths.
Has a safety cut off, so will not upgrade without the lid on.
Elegoo Mercury
I’ve been using the Mercury for a month and it has been working perfectly so far. Speeds up the curing process drastically. Highly recommend
Does what it says on tin, easy to use, comes with everything you need. It gets used a lot in house with my printer going full tilt since I bought it.
No thrills, mess free washing and curing!
Wonderful piece of kit! Simple and hassle free. The washing side is simple, just select how long and start. The noise of it spinning up to speed is actually quite pleasant, very sci-fi. Curing again is simple, although the fans are a bit loud during this. But the parts come out cured with no sticky spots. The only thing I changed was putting some finer mesh inside the basket for smaller parts. But I mainly wash the parts whilst attached to the print plate.
No thrills, mess free washing and curing!
Wonderful piece of kit! Simple and hassle free. The washing side is simple, just select how long and start. The noise of it spinning up to speed is actually quite pleasant, very sci-fi. Curing again is simple, although the fans are a bit loud during this. But the parts come out cured with no sticky spots. The only thing I changed was putting some finer mesh inside the basket for smaller parts. But I mainly wash the parts whilst attached to the print plate.
Great addition to your cleanup step for any SLA printer. Makes cleaning and curing a simple task.
Excellent build quality and super easy setup. Had interlocks to prevent incorrect operation. I am using for an Elegoo Saturn so the build plate holder is no good for me, but the basket is large enough to accomodate most large prints.
Great addition to your cleanup step for any SLA printer. Makes cleaning and curing a simple task.
Excellent build quality and super easy setup. Had interlocks to prevent incorrect operation. I am using for an Elegoo Saturn so the build plate holder is no good for me, but the basket is large enough to accomodate most large prints.
Great product!
Does exactly what is say! Makes thing much easier than having to manually clean and cure
I didn’t expect this to be as good as as it is. Results are amazing, no more mess, super clean prints.
I’ve been printing an F40 engine from my own CAD drawings and it was incredibly hard to clean uncured resin from all the fine detail. This machine does it perfectly.
Really powerful vortex is generated that removes resin from the finest detail on the most delicate parts without damage.
No more mess either with this compared to manual washing.
Really good for a Mars and a Mars Pro build plate size. I use the adaptor, put the plate and the models in the IPA and they get an excellent wash. Then remove from build plate and place on the curing turntable for a few minutes. Excellent. Much better and less messy than the tupperware boxes and nail UV lamp I had before. Hopefully a larger version will become available when the Saturn arrives.
Does the job
Great build quality, does the job. There are cheaper methods to doing what this does. But i do enjoy having quality equipme
Not required - cheaper alternatives but handy to have
Habdy to have but not necessary, I purchased it due to seasonal changes and convience of setup
Really like this product, does a good job of cleaning and curing parts. The Elegoo mars & mars pro build platform don’t fit in the anycubic wash and cure station but do fit in this setup.
Wire basket provided allows mass processing of part or parts from the Elegoo satu
Currently own the Elegoo Mars and have a Saturn on order so I figured I’d stick with Elegoo for their wash and cure solution. I have to say that it really does beat using a dirty and a clean tub of IPA as the stirrer in this does a great job! The ability to add increments of 30 seconds is a nice touch too as if something isn’t quite cured or is still a little bit sticky you can add an extra 30 seconds to the cure or wash.
The build plate attachment for the Mars/pro plate is very handy as I can take my plate straight from the printer and slap it into the machine and wash for 2-3 minutes. It actually makes it easier to remove the prints from the plate! The basket is nice once you’ve loosened things from the supports if they need an extra wash too.
The curing lights cover a large height and appear to have 2 different wavelengths as they come out as 2 different colours.
My only nit-pick is that the lid to the tub doesn’t quite fit easily so if that could get fixed then 100% a perfect solution for anyone with a Mars/Mars Pro/2. For anyone with an alternative printer I would probably still recommend this over other solutions due to the 30 second timer and higher light coverage.