Fingerprint Padlock, Fingerprint or Remote via Phone App, Smart Lock with USB Charging, Unlock Record, Waterproof, Anti-Theft, Battery Indicator for Gym Locker, School Employee Locker, Warehouse
Anweller Fingerprint Padlock
Are you tired of bring keys when work out and worry about where to put the key?
Are you worrying about remembering a combination (more numbers) or having to cut your lock for whatever other reason?
If your answer is YES, Anweller Fingerprint Padlock is your choice.
- Unlock by mobile app or fingerprint!
- Share with family/friends!
- Free mobile app!
| | | | |
|---|---|---|---|
1 Second UnlockIt can be unlocked in 1 second with just one tap. This product solves the troubles of finding keys, losing keys, and forgetting passwords. Thanks to the intelligent fingerprint recognition technology, the fingerprint authentication rate reaches 99%, and the verification speed is fast. More importantly, it has a fingerprint learning function. The more you use it, the faster the unlocking speed. | Super strong lock body is saferThe lock body is made of super tough zinc alloy to resist physical attacks. The diameter of the stainless steel lock beam is 1 cm, so it is difficult to cut even at the end to improve the crime prevention effect. Durable and safe padlock. | IP67 Waterproof And DustproofThe lock body supports IP67 waterproof and dustproof, and can be used indoors and outdoors. If you get wet from rain, wipe off the water on the fingerprint sensor before unlocking. | Full power can be used for one yearEquipped with a micro USB data cable. Fully charged can be used for one year. When the battery is about to run out, there is a warning system. We also designed a rubber plug to install on the charging port. You can safely protect the built-in battery. |
For convenience, please read the notes.
What’s new in the initial mode
The new padlock will be in the initial mode, and any fingerprint can be unlocked. If the fingerprint setting fails, it will stay in this mode forever. Please check after fingerprint registration.
Pay attention to fingerprint settings
Provide a detailed manual. Before setting the fingerprint, please read the instructions first and set the clearest fingerprint as the administrator fingerprint.
For your safety, please spread your fingerprints as widely as possible. If one fingerprint cannot be recognized, please enter more fingerprints to prevent unlocking.
Product specifications
- 12*12mm ultra-large semiconductor biometric fingerprint sensor.
- IP67 waterproof and dustproof
- Material: body-zinc alloy; lock beam-stainless steel
- Size: 10*6.2*2.5cm, 363g
- Number of registered fingerprints: 15 sheets, 2 administrators + 13 ordinary users
- Rechargeable: USB cable
- Charging time: about 2 hours
- Use time: fully charged can be used for 1 year
APP SETTING
Specification:
- Size: 4.13 x 2.48 x 0.98 inches
- Material: Stainless steel
- Weight: 1 lb
- Battery level indicator
- Ongoing standby: 12 months
- Unlock times: 2000 times
- Waterproof Level: IP67
- Technology: biometrics
- Fingerprint collection time: ≤ 0.5 seconds
- Fingerprint match time: ≤ 1.0 seconds
- Fingerprint Capacity: 15 sets of Fingerprints
- Operating temperature: -20 °C ~ +70 °C
- Support system: Android & iOS
Perfect for Gym Lockers, School Lockers, Warehouse, Bicycle, Motorcycles, Garage Doors, Tool Box, Pickup Trucks, Courtyard, Truks
| | | | |
|---|---|---|---|
Administrator’s Fingerprint Registration1.Before set up, any fingerprint can unlock the smart padlock. 2.Long press 8s until the blue light stays on. 3.Start to enter the administrator fingerprint. Same finger press 5 times. 4.If green light flashes,the registration is successful.4-2.If red light flashes,the registration is failed. 5.After 5 times successful repeats the green light will flash,signaling the success of registration | Registering the 2rd-15th Fingerprint1.Long press the 1st administrator’s fingerprint 5s to unlock(blue light flashes) 2.Start to enter the fingerprint. Same finger press 5 times. 3-1.If green light flashes,the registration is successful. 3-2.If red light flashes,the registration is failed. 4.After 5 success attempts,your fingerprint will be recorded. | Delete Fingerprint1.Press your finger to unlock. 2.After unlocking,press and hold the sensor for 8 seconds until the red light stays on. 3.Then release your finger and the red light will flash.Press the administrator fingerprint once. 4.If the green light turns on, all fingerprints will be deleted,and the lock return to factory mode. NOTE: If you need to return your fingerprint padlock, please don’t forget to remove your fingerprints. | Warm tipsYou need to enter 5 times when registering your fingerprint. Every time you enter a fingerprint, the position should be adjusted, the area of the entered fingerprint becomes larger, and the sensitivity is improved. Please register as shown above. (Which part of the finger is used when registering, please use the same position of the same finger when unlocking) NOTE: If you need to return your fingerprint padlock, please don’t forget to remove your fingerprints. |
| Weight: | 410 g |
| Dimensions: | 5.99 x 2.54 x 10.01 cm; 410 Grams |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Anweller |
I use my shed a lot, mainly for storage that i need frequent access to, as such, i am in and out of there often, prior to buying this, i was using a normal padlock and key and kept having to find the leys each time instead of just walking over and using it, that is now not the case.
I have set this up for my own access a couple fo ways, number 1 being the obvious set to my fingerprint which means i grab it, wait for it to do the little click and it’s open, the other way i have it is with my phone so i can unlock it directly (if my hands are dirty or wet it has a bit more difficulty reading them so i can use the phone), this means i can also unlock it for family when they decide they want something in there and i don’t have to leave a key for them.
It is a weighty padlock, so make sure you have a weighty latch for it to go on. You also need to remember to charge it, however I’ve had it on for a while now and the battery just doesn’t seem to be going down at all, i’d say an easy 5-6 months of use before charging which is great for me as it’s leave it and forget.
As you may have guessed, it’s also waterproof as i’ve had it out in recent storms and the only issue with water is my fingerprints changing when wet, nothing to do with the padlock itself.
Great product no more looking or carrying keys, all the families finger print can be safe so easy to open. Advised 12 month battery life came fully charged and not dropped 1% yet. Great weight and so easy to set up and use.