HDMI CCTV Monitor 10.1 inch IPS LCD Full HD Screen 1280×800 Rimless with AV/VGA/HDMI/BNC/AUX/Audio Ports Built-in Speaker for Raspberry Pi Home Security Monitor CCTV PC Display By whole
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| 7 inch CCTV Monitor | 8 inch CCTV HDMI Monitor | 10.1 inch CCTV HDMI Monitor | 10.1 inch CCTV HDMI Monitor | 12 inch CCTV HDMI Monitor | 15.6 inch CCTV HDMI Monitor | |
| Screen resolution | HD1024×600 | HD1024×768 | HD1280×800 | HD1280×800 | HD1920×1080 | HD1920×1080 |
| Support port | AV/VGA/ /HDMI | AV / VGA / HDMI / BNC | USB / AV / VGA / HDMI / BNC | USB / AV / VGA / HDMI / BNC | AV / VGA / HDMI / BNC | USB / AV / VGA / HDMI / BNC |
| Aspect ratio | 16:9 | 4:3 | 16:9 | 16:9 | 16:9 | 16:9 |
| Screen contrast | 500:1 | 300:1 | 660：1 | 660：1 | 800:1 | 800:1 |
| Material | plastic | plastic | plastic | plastic+glass | plastic | plastic |
| Weight: | 1 kg |
| Size: | 10 inch 1280X800 |
| Dimensions: | 27.6 x 17.8 x 10.2 cm; 1 Kilograms |
| Model: | WHOLEV |
| Part: | WHOLEV |
| Colour: | 10 inch 1280*800 |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | WHOLEV |
| Colour: | 10 inch 1280*800 |
| Dimensions: | 27.6 x 17.8 x 10.2 cm; 1 Kilograms |
| Quantity: | 1 |
| Size: | 10 inch 1280X800 |
I got this to use as a secondary monitor on a desk that doesn’t really have room for two larger monitors and it’s turned out to be ideal for having notes or videos open while I’m working or chats open while I’m gaming. The stand is easy to assemble and the face buttons and built-in menu are simple enough. The picture is very slightly on the blue side by default but nothing a little colour adjustment (in PC settings) can’t fix. Built-in speaker is so-so but for a little monitor like this you shouldn’t expect much; it gets the job done.
As a side note, the braided HDMI cable pictured here is not the one that came with the monitor.
I got this to use as a secondary monitor on a desk that doesn’t really have room for two larger monitors and it’s turned out to be ideal for having notes or videos open while I’m working or chats open while I’m gaming. The stand is easy to assemble and the face buttons and built-in menu are simple enough. The picture is very slightly on the blue side by default but nothing a little colour adjustment (in PC settings) can’t fix. Built-in speaker is so-so but for a little monitor like this you shouldn’t expect much; it gets the job done.
As a side note, the braided HDMI cable pictured here is not the one that came with the monitor.
I got this to use as a secondary monitor on a desk that doesn’t really have room for two larger monitors and it’s turned out to be ideal for having notes or videos open while I’m working or chats open while I’m gaming. The stand is easy to assemble and the face buttons and built-in menu are simple enough. The picture is very slightly on the blue side by default but nothing a little colour adjustment (in PC settings) can’t fix. Built-in speaker is so-so but for a little monitor like this you shouldn’t expect much; it gets the job done.
As a side note, the braided HDMI cable pictured here is not the one that came with the monitor.
I got this to use as a secondary monitor on a desk that doesn’t really have room for two larger monitors and it’s turned out to be ideal for having notes or videos open while I’m working or chats open while I’m gaming. The stand is easy to assemble and the face buttons and built-in menu are simple enough. The picture is very slightly on the blue side by default but nothing a little colour adjustment (in PC settings) can’t fix. Built-in speaker is so-so but for a little monitor like this you shouldn’t expect much; it gets the job done.
As a side note, the braided HDMI cable pictured here is not the one that came with the monitor.
Brilliant item. I actually use this as a DISPLAY unit for my REKORDBOX DJ software so I dont have to have my laptop all near the decks!
I’ve wanted an extra screen for a while but wanted something a bit smaller and more cost effective than a computer monitor.
This works brilliant. screen resolution is good
very happy!
Very easy to set up .excellent service delivery ,one day ,love the stand as it comes with a sticky pad .keeps it all neat & tidy
A nice size to fit onto a small desk.
Very good quality display.
The only problem is the visibility is dependent on the angle that you view the display.In other words the light level of the display depends on how it is viewed but ok for a cctv home system.
I bought this to use to connect to my consoles for portable use, although not really what its advertised for it gives an amazing picture quality, especially fir the project i was building which was a pstv connevted to this small screen to use as im pretty much bed bound. Its portable and really light, so can be used on my lap or stood on a table top. Id recomemd this little monitor even if its just for the amount of sturdy connection sockets mou ted underneath. Will be looking at more products in this companies range.
The screen is an ideal size to use as a CCTV monitor as it is compact and sits unobtrusively on the desk. The image is sharp and the colours are realistic. The fitting for the monitor onto the base was a little too tight to fit but the company sent a replacement connector without any query, delay or cost, so the quality of customer care trumps that issue and I am very satisfied with the outcome.
The screen is an ideal size to use as a CCTV monitor as it is compact and sits unobtrusively on the desk. The image is sharp and the colours are realistic. The fitting for the monitor onto the base was a little too tight to fit but the company sent a replacement connector without any query, delay or cost, so the quality of customer care trumps that issue and I am very satisfied with the outcome.
It’s a great little screen perfect for CCTV and great for price
Setup with my Yeskamo cctv very easy, picture quality great.
good quality and good value.
Unfortunately it stopped working after 6 months.
Did manage to return it only after a lengthy conversation though.
Rather than use an iPad for our Teleprompter we have used this monitor. It allows us to edit and control the teleprompter on the fly from a separate laptop. With VGA and HDMI options you’ve the flexibility to also use as a camera monitor. Consider getting a 11″ pouch to store when not in use. Recommended.
The quality of the picture was excellent. Very easy to set up. Just what we wanted.
What is sheerness? I’m assuming that sheerness refers to clarity of the picture which presumably also depends upon the cameras fitted. I’m pleased with the monitor; the picture is very clear in daylight and nightlight. This was a spur of the moment purchase because the cameras could not be linked to the tv. The monitor is very neat and fits unobtrusively on the tv stand below the tv. No need for wall fixing though this is possible. Perfect! I’m now pleased that the system is independent of the tv, something I wouldn’t have otherwise considered. A happy accident.
Easy to set up, and perfect because I just wanted a small screen as a CCTV monitor.
Bought 3 of these for a works project.
Needed something only 15″ so these were great.
Have loads of connections for PCs and CCTV systems.
Picture quality is good for daily use clear and bright.
Overall quite happy with it.
This is a cctv monitor which is a small neat and tidy unit and then ordered another one brilliant picture quality
Simple to set up, use it on my CCTV system to monitor the recorder. Took all of 5 minutes to set up and 2 of those were easing the screws on the slot that holds the bracket as it wa s tight fit.
Bought these as additional hdmi screens for a competition venue.
Worked flawlessly until one day, one of the units lost its green connection.
Informed customer services, sent them a video and a few days later, I have a new unit.
Highly recommended
The product us amazing, it is easy to set up and using the included sticker its easy to install.
Had this product for 11 months till the picture stopped working. However when I contacted the company they agreed to send me a brand new one for free so would highly recommend.
It is a very good quality for the money I’m using mine as a a chat monitor for my streams I like the audio and all the other features
Bought 2 of these screens as an addition to a cctv system, screen picture quality is good even when split screen for multiple images. Easy to use and install, light and compact. Recommend
I have this in my office to view the front doo
We are using this monitor as a test monitor as CCTV installers it is really useful for setting up and testing. Simple to use and small and compact would recommend.
First of all, there’s another detailed review of the ‘rimless’ product that was very helpful in letting me know you can set a refresh rate of 72hz on this monitor. Also the review says this is a TN panel, it possibly is, however the viewing angles are very good, like IPS and unlike TN, the colours are oversaturated and you need a bit of tweaking to get it looking good, this may be partly down to the screen being glossy and not matte. The monitor also doesn’t repond to VCP codes (not important for most). All of this is trivial to me, and isn’t a criticism.
The only thing I dislike about this monitor is that when it goes to standby it goes to a white screen with the logo, unfortunately there seems no way to set a black/blank standby screen. Which is unfortunate, I’m not sure if the USB slot is capable of updating the firmware of the monitor, but a if it is a firmware fix would be nice.
Overall, it is a very good buy for the price and a decent second monitor or a CCTV/utility monitor for around the house. If it wasn’t for the standby screen I would have given it 5 stars.
First of all, there’s another detailed review of the ‘rimless’ product that was very helpful in letting me know you can set a refresh rate of 72hz on this monitor. Also the review says this is a TN panel, it possibly is, however the viewing angles are very good, like IPS and unlike TN, the colours are oversaturated and you need a bit of tweaking to get it looking good, this may be partly down to the screen being glossy and not matte. The monitor also doesn’t repond to VCP codes (not important for most). All of this is trivial to me, and isn’t a criticism.
The only thing I dislike about this monitor is that when it goes to standby it goes to a white screen with the logo, unfortunately there seems no way to set a black/blank standby screen. Which is unfortunate, I’m not sure if the USB slot is capable of updating the firmware of the monitor, but a if it is a firmware fix would be nice.
Overall, it is a very good buy for the price and a decent second monitor or a CCTV/utility monitor for around the house. If it wasn’t for the standby screen I would have given it 5 stars.
First of all, there’s another detailed review of the ‘rimless’ product that was very helpful in letting me know you can set a refresh rate of 72hz on this monitor. Also the review says this is a TN panel, it possibly is, however the viewing angles are very good, like IPS and unlike TN, the colours are oversaturated and you need a bit of tweaking to get it looking good, this may be partly down to the screen being glossy and not matte. The monitor also doesn’t repond to VCP codes (not important for most). All of this is trivial to me, and isn’t a criticism.
The only thing I dislike about this monitor is that when it goes to standby it goes to a white screen with the logo, unfortunately there seems no way to set a black/blank standby screen. Which is unfortunate, I’m not sure if the USB slot is capable of updating the firmware of the monitor, but a if it is a firmware fix would be nice.
Overall, it is a very good buy for the price and a decent second monitor or a CCTV/utility monitor for around the house. If it wasn’t for the standby screen I would have given it 5 stars.
Could be just slightly cheaper but the monitor is just the right size you need for your home CCTV not a massive 20inch. I’m a lazy instructions reader, it is really plug and play thing using HDMI, they supply all the cables which could be the reason for few extra pounds.
::::[ SETUP ]::::
Setup wasn’t great to be honest, over HDMI it was detected as a 1024×600 display, and I could tell that it was not at native resolution. I created a custom resolution of 1280×800 using CVT, with a refresh rate of 72hz, which is exactly half that of my primary monitor at 144hz to avoid stuttering. I had to turn the display off and back on again and I could tell it was now displaying at the correct resolution for the panel and the image was sharp. The monitor accepts the signal and so I decided to see how far I could “overclock” the display, it seems to go to 75hz happily with no complaints but anything above that does not work, the usual tricks to squeez out a few more hz did nothing to allow it to go above 75hz. So yes, this display does overclock to 75hz, if you are using a 144hz display then you should set the refresh rate to 72hz, this will avoid any juddering issues Windows may have when using displays with differing refresh rates. There was no frameskipping at any refresh rate that worked.
Next I also found that I had to set the colour mode to “limited” rather than full as the display was crushing blacks and whites, the panel is 8 Bit and once I set the colour to limited I found the display to be surprisingly accurate.
::::[ DISPLAY ]::::
The first thing I noticed was that the edges of the display “hid” behind the glass front unless looking directly at it from the front, A strange design flaw but on a panel this small and which will likely see use as a CCTV or secondary display it is not an issue, the display is set back from the glass by a few mm.
The second thing I noticed was that sadly, this is a TN panel, and not an IPS panel as advertised, now it is a “good” TN panel in that it has wide viewing angles and due to it’s size you don’t see any colour shifting, so unless you know what you are looking for or are looking at it from extreme angles it’s unlikely you’d notice, the LAGOM viewing angle test doesn’t even give away that it is a TN panel.
Colours are very uniform for such a display, even a dark grey (which usually reveals ant flaws in a display) background with flat colours being displayed surprisingly vibrant for such a display.
Sadly there doesn’t seem to be a way to actually control the backlight, with both brightness and contrast only affecting the image, without adjusting the backlight brightness, so values of 50 for Brightness, 50 for Contrast and 50 for Saturation will be the only “correct” or native values. There was also no way to control or adjust colours, meaning I’ll have to do that from my graphics card drivers as I prefer a “warm” tone to my display.
::::[ FINAL THOUGHTS ]::::
For a second monitor, where desk space is limited or where you don’t want too much ‘screen’ in your face at once this more than fits the bill. I personally use it for displaying reference images when working on 3D models and for E-Mail, Facebook or for watching movies “in the background” so I don’t get distracted from what I am doing on my primary monitor. I did find the text to be a little small, in a perfect world I’d want to go from 10″ to maybe 12 or 13″ but I’m happy with my purchase.
::::[ SETUP ]::::
Setup wasn’t great to be honest, over HDMI it was detected as a 1024×600 display, and I could tell that it was not at native resolution. I created a custom resolution of 1280×800 using CVT, with a refresh rate of 72hz, which is exactly half that of my primary monitor at 144hz to avoid stuttering. I had to turn the display off and back on again and I could tell it was now displaying at the correct resolution for the panel and the image was sharp. The monitor accepts the signal and so I decided to see how far I could “overclock” the display, it seems to go to 75hz happily with no complaints but anything above that does not work, the usual tricks to squeez out a few more hz did nothing to allow it to go above 75hz. So yes, this display does overclock to 75hz, if you are using a 144hz display then you should set the refresh rate to 72hz, this will avoid any juddering issues Windows may have when using displays with differing refresh rates. There was no frameskipping at any refresh rate that worked.
Next I also found that I had to set the colour mode to “limited” rather than full as the display was crushing blacks and whites, the panel is 8 Bit and once I set the colour to limited I found the display to be surprisingly accurate.
::::[ DISPLAY ]::::
The first thing I noticed was that the edges of the display “hid” behind the glass front unless looking directly at it from the front, A strange design flaw but on a panel this small and which will likely see use as a CCTV or secondary display it is not an issue, the display is set back from the glass by a few mm.
The second thing I noticed was that sadly, this is a TN panel, and not an IPS panel as advertised, now it is a “good” TN panel in that it has wide viewing angles and due to it’s size you don’t see any colour shifting, so unless you know what you are looking for or are looking at it from extreme angles it’s unlikely you’d notice, the LAGOM viewing angle test doesn’t even give away that it is a TN panel.
Colours are very uniform for such a display, even a dark grey (which usually reveals ant flaws in a display) background with flat colours being displayed surprisingly vibrant for such a display.
Sadly there doesn’t seem to be a way to actually control the backlight, with both brightness and contrast only affecting the image, without adjusting the backlight brightness, so values of 50 for Brightness, 50 for Contrast and 50 for Saturation will be the only “correct” or native values. There was also no way to control or adjust colours, meaning I’ll have to do that from my graphics card drivers as I prefer a “warm” tone to my display.
::::[ FINAL THOUGHTS ]::::
For a second monitor, where desk space is limited or where you don’t want too much ‘screen’ in your face at once this more than fits the bill. I personally use it for displaying reference images when working on 3D models and for E-Mail, Facebook or for watching movies “in the background” so I don’t get distracted from what I am doing on my primary monitor. I did find the text to be a little small, in a perfect world I’d want to go from 10″ to maybe 12 or 13″ but I’m happy with my purchase.
::::[ SETUP ]::::
Setup wasn’t great to be honest, over HDMI it was detected as a 1024×600 display, and I could tell that it was not at native resolution. I created a custom resolution of 1280×800 using CVT, with a refresh rate of 72hz, which is exactly half that of my primary monitor at 144hz to avoid stuttering. I had to turn the display off and back on again and I could tell it was now displaying at the correct resolution for the panel and the image was sharp. The monitor accepts the signal and so I decided to see how far I could “overclock” the display, it seems to go to 75hz happily with no complaints but anything above that does not work, the usual tricks to squeez out a few more hz did nothing to allow it to go above 75hz. So yes, this display does overclock to 75hz, if you are using a 144hz display then you should set the refresh rate to 72hz, this will avoid any juddering issues Windows may have when using displays with differing refresh rates. There was no frameskipping at any refresh rate that worked.
Next I also found that I had to set the colour mode to “limited” rather than full as the display was crushing blacks and whites, the panel is 8 Bit and once I set the colour to limited I found the display to be surprisingly accurate.
::::[ DISPLAY ]::::
The first thing I noticed was that the edges of the display “hid” behind the glass front unless looking directly at it from the front, A strange design flaw but on a panel this small and which will likely see use as a CCTV or secondary display it is not an issue, the display is set back from the glass by a few mm.
The second thing I noticed was that sadly, this is a TN panel, and not an IPS panel as advertised, now it is a “good” TN panel in that it has wide viewing angles and due to it’s size you don’t see any colour shifting, so unless you know what you are looking for or are looking at it from extreme angles it’s unlikely you’d notice, the LAGOM viewing angle test doesn’t even give away that it is a TN panel.
Colours are very uniform for such a display, even a dark grey (which usually reveals ant flaws in a display) background with flat colours being displayed surprisingly vibrant for such a display.
Sadly there doesn’t seem to be a way to actually control the backlight, with both brightness and contrast only affecting the image, without adjusting the backlight brightness, so values of 50 for Brightness, 50 for Contrast and 50 for Saturation will be the only “correct” or native values. There was also no way to control or adjust colours, meaning I’ll have to do that from my graphics card drivers as I prefer a “warm” tone to my display.
::::[ FINAL THOUGHTS ]::::
For a second monitor, where desk space is limited or where you don’t want too much ‘screen’ in your face at once this more than fits the bill. I personally use it for displaying reference images when working on 3D models and for E-Mail, Facebook or for watching movies “in the background” so I don’t get distracted from what I am doing on my primary monitor. I did find the text to be a little small, in a perfect world I’d want to go from 10″ to maybe 12 or 13″ but I’m happy with my purchase.
::::[ SETUP ]::::
Setup wasn’t great to be honest, over HDMI it was detected as a 1024×600 display, and I could tell that it was not at native resolution. I created a custom resolution of 1280×800 using CVT, with a refresh rate of 72hz, which is exactly half that of my primary monitor at 144hz to avoid stuttering. I had to turn the display off and back on again and I could tell it was now displaying at the correct resolution for the panel and the image was sharp. The monitor accepts the signal and so I decided to see how far I could “overclock” the display, it seems to go to 75hz happily with no complaints but anything above that does not work, the usual tricks to squeez out a few more hz did nothing to allow it to go above 75hz. So yes, this display does overclock to 75hz, if you are using a 144hz display then you should set the refresh rate to 72hz, this will avoid any juddering issues Windows may have when using displays with differing refresh rates. There was no frameskipping at any refresh rate that worked.
Next I also found that I had to set the colour mode to “limited” rather than full as the display was crushing blacks and whites, the panel is 8 Bit and once I set the colour to limited I found the display to be surprisingly accurate.
::::[ DISPLAY ]::::
The first thing I noticed was that the edges of the display “hid” behind the glass front unless looking directly at it from the front, A strange design flaw but on a panel this small and which will likely see use as a CCTV or secondary display it is not an issue, the display is set back from the glass by a few mm.
The second thing I noticed was that sadly, this is a TN panel, and not an IPS panel as advertised, now it is a “good” TN panel in that it has wide viewing angles and due to it’s size you don’t see any colour shifting, so unless you know what you are looking for or are looking at it from extreme angles it’s unlikely you’d notice, the LAGOM viewing angle test doesn’t even give away that it is a TN panel.
Colours are very uniform for such a display, even a dark grey (which usually reveals ant flaws in a display) background with flat colours being displayed surprisingly vibrant for such a display.
Sadly there doesn’t seem to be a way to actually control the backlight, with both brightness and contrast only affecting the image, without adjusting the backlight brightness, so values of 50 for Brightness, 50 for Contrast and 50 for Saturation will be the only “correct” or native values. There was also no way to control or adjust colours, meaning I’ll have to do that from my graphics card drivers as I prefer a “warm” tone to my display.
::::[ FINAL THOUGHTS ]::::
For a second monitor, where desk space is limited or where you don’t want too much ‘screen’ in your face at once this more than fits the bill. I personally use it for displaying reference images when working on 3D models and for E-Mail, Facebook or for watching movies “in the background” so I don’t get distracted from what I am doing on my primary monitor. I did find the text to be a little small, in a perfect world I’d want to go from 10″ to maybe 12 or 13″ but I’m happy with my purchase.
The lead which came with the product did not work. Luckily I had another lead which worked the product. I have used the lead that came with it on something else.
I used this as a playback device on a camera switcher for live streaming. Works great, easy to use, good picture.
This mini monitor is perfect for use like software you need to see everytime, like whatsapp, slack, facebook, etc. Perfect! thank you very much
Very pleased the quality looks very good. We are using it with bose .
Good little monitor and easy to use. Figured out how to assemble screen on stand, but no instructions with it. Great that it has a USB charging point so that I can get power to other peripherals as part of my CCTV system.
We are using it for our CCTV monitor , received the product as per description, good quality picture , fast delivery and great value for money. Highly recommended.
Bought this as a monitor. It was easy to set up and worked first time.
I’ve attached it to my laptop as a small external screen and works great. Picture isn’t the best, but you get used to that, and it’s not a mega expensive monitor anyways. Well worth getting for price.
I bought this to hook up to by bird box camera and I am really pleased with it. I didn’t want a big tv screen taking up space and this little monitor is ideal. Picture quality it great it just a shame no birds have taken up residence! Great product though
Bought this for my CCTV,.. crystal clear and easy set up
This monitor iwas just what I was looking for. Easy o use and instal
Excellent Monitor for the money, small, light, good quality image. I use it as an HDMI preview from my Roland mixer, perfect size for that. Image is clear, and very easy to use. Recommended.
Great little monitor well made and good value for the money.
This is a very good product, ideal for my cctv in a confined space
THIS MONITOR IS REALLY GOOD FOR SO MANY THINGS.
I USE IT FOR MY CAMERAS, COMPUTER AND SECURITY EQUIPMENT.
THE QUALITY IS AMAZING AND THE PRICE VERY GOOD.
It’s very fast delivery within 24 hours safe receipt, good quality and easy install, well recommended
Very pleased, when it first arrived I thought it was too small but is perfect as a second monitor to my laptop an ideal for working from home
This is a super item, I bought to use when I install cctv/ set up client recorders when they don’t have a main monitor, I was shocked with the quality of such a small item! So much so I’ll be adding these into every job! Well worth the money
Ok product
A tad ob the expensive side
Cheaper units out there
I bought this to attach to a CCTV NVR. The picture quality is impressive for the size and price for the product. The only downside is there appears to be no way of deactivating the electronic beep when you press the buttons to change input, navigate the menu etc. but I’ll happily put up with it. I can’t say much about the sound quality of the built-in speakers as I don’t use this feature.
great little monitor so easy to set up all the cables you need, very easy to navigate the menu.
10/10 from me
Had to replace a small TV with no HDMI port for something that could interface with a Sky Q Mini Box. This little monitor is excellent with great picture and includes sound from 2 small speakers at the rear.
I bought the 10.1 inch version of this screen which I think is a nice size as it’s not too big but also gives a bit of extra space on the display. Mostly bought this to use with VGA as u have some old computers etc that I just can’t connect to my modern 4k monitor. It’s quite handy that it also has hdmi so I ll be using it as a little extra display for my main computer too. Display itself looks sharp and good colours
I ordered this monitor from Kinglev and was pleased but not pleased enough to right a review. However, the screen stop working after six months and I sought a replacement. The customer service was excellent throughout culminating in a new screen replacement in days. Highly recommended provider.
The only negative I have with this little gem is that when the screen turns off using an HDMI connection it displays a glaring white background which will undoubtedly lead to pixel failure if left for a long time. But otherwise I’m a happy bunny and pleased with the purchase.
It works finally not bad but setup is not easy at all taken me 4 days
But it is a good product and good value
Frank
I liked the design and neatness firstly.When set up I found picture and sound quality to be good.I am using this as a monitor for my cctv.Nice size for living room . Unabtrusive..The only downside is that I consider it to be a bit pricey.
Purchased last November- worked a treat until last week. So unless you only want a monitor to only last 11 months ! Don’t bother.
Used as a CCTV monitor. In hindsight I perhaps should have ordered the 12in version as that comes with a remote control. (but is more expensive) It arrived quickly and easy to set up – even for technophobe!
This monitior is excellent value for money and great quality. It was just what we wanted a stand alone monitior for the CCTV.
I bought this to use with my Raspberry Pi and I’m quite pleased with the screen. However, the stand supplied was useless as there was no way, as far as I could see, to connect the bit which attaches to the screen to the base.
Very happy with my purchase of this. I can connect my mini pc to it and being able to view my trading terminals without it taking one of my main dual screens. Build quality is fantastic. Stand is easy to put on and take off. Picture quality is very good. Recommended
I wanted this to be able to monitor video from set top boxes and a Roku stick. Other than not being able to manually select 16×9 or 4×3, it is faultless.
Monitor was easy to setup and get working picture quality is great and because the unit is small it can sit out of the way.
Purchased for a music system using a Raspberry Pi and the quality is really good. Plugged into the Pi and it worked first time with no issues (not driver install). Very well made and I would highly recommend.
The WHOLEV monitor is easy to assemble and is robust. We are using it as a monitor for the Raspberry Pi 4B for astronomical imaging. There are lots of options for input and we are using the HDMi input. The stand allows the monitor to be placed at a wide range of angles, so it can be adjusted to exactly the right angle for your needs. The power lead is long enough to be useful. This monitor would be suitable for a number of video applications and we like it.
The WHOLEV monitor is easy to assemble and is robust. We are using it as a monitor for the Raspberry Pi 4B for astronomical imaging. There are lots of options for input and we are using the HDMi input. The stand allows the monitor to be placed at a wide range of angles, so it can be adjusted to exactly the right angle for your needs. The power lead is long enough to be useful. This monitor would be suitable for a number of video applications and we like it.
The WHOLEV monitor is easy to assemble and is robust. We are using it as a monitor for the Raspberry Pi 4B for astronomical imaging. There are lots of options for input and we are using the HDMi input. The stand allows the monitor to be placed at a wide range of angles, so it can be adjusted to exactly the right angle for your needs. The power lead is long enough to be useful. This monitor would be suitable for a number of video applications and we like it.
love this monitor, colours are good refresh rate is great pixel quility fine,easy to set up,is light weight and thin.good to buy.
I wanted a small auxiliary monitor to use with a development board (NVIDIA Jetson Nano) and this monitor is ideal for my requirement.
This is a great little screen with good picture quality. It is perfect for my cctv system where space limitations mean a normal size monitor would not work. Very happy.
Great little monitor for cctv, plug and play with hdmi. Good picture quality.
I am pleasantly surprised with this Monitor! Found it really easy to setup and attach my mini PC which is the main reason for purchasing this item in the first place. I will now explore the other useful possibilities that had never occurred to me other than the one I’m using it for at the moment!
More than happy with this product!
Great image quality in a 7″ screen. Great value package comes with all the connecting leads and a fantastic long Flat HDMI cable that is easily routed through the tiniest of spaces. Mine is being used as a second screen to show sensor readouts on my PC. The easy to use lightweight mount/stand made its breeze to install behind the tempered glass side panel. Highly recommended and excellent value for money.
This is great if you want a small computer set up like a Rasberry Pi. Viewing angles are nothing special but for the price didn’t expect anything else really. Perfectly good for what I wanted. Could be useful for tinkering with “proper” PC set up also, if you are building a rig or something and wanted to check everything is working for instance. Don’t recommend if you want to watch movies or play games of course, but that’s not the intent with this.
I wanted a small monitor for the IP CCTV cameras I use to monitor callers to my home. This item fitted the bill nicely – the picture quality is good, the broad range of inputs is useful, and it does what I needed it to do.
*Edit….. Ordered a new one, received yesterday, and it came with a 2 pin AC power adapter instead of 3 pin.
*Edit (again). Can’t fault the seller’s customer service. Sent me a free power adapter, and now I have a fully working, lightweight monitor. At least you can buy in confidence that if there’s any issues the seller is happy to resolve. Many Thanks Kin.
*Edit….. Ordered a new one, received yesterday, and it came with a 2 pin AC power adapter instead of 3 pin.
*Edit (again). Can’t fault the seller’s customer service. Sent me a free power adapter, and now I have a fully working, lightweight monitor. At least you can buy in confidence that if there’s any issues the seller is happy to resolve. Many Thanks Kin.
*Edit….. Ordered a new one, received yesterday, and it came with a 2 pin AC power adapter instead of 3 pin.
*Edit (again). Can’t fault the seller’s customer service. Sent me a free power adapter, and now I have a fully working, lightweight monitor. At least you can buy in confidence that if there’s any issues the seller is happy to resolve. Many Thanks Kin.
Ideal (non-touchscreen) display for the Raspberry Pi. Myriad inputs inc HDMI for the Pi and all necessary connection leads including a flat HDMI lead which is easy to route. The 1024×786 resolution is good enough to use with the Pi. The case and stand are well made. My only criticism would be some light bleed thru around the edges but with a non-black background you don’t notice it – plus you get what you pay for. As a Prime subscriber I also got a further 4 off the asking price which made the entire package extremely good value.
Recommended.
Ideal (non-touchscreen) display for the Raspberry Pi. Myriad inputs inc HDMI for the Pi and all necessary connection leads including a flat HDMI lead which is easy to route. The 1024×786 resolution is good enough to use with the Pi. The case and stand are well made. My only criticism would be some light bleed thru around the edges but with a non-black background you don’t notice it – plus you get what you pay for. As a Prime subscriber I also got a further 4 off the asking price which made the entire package extremely good value.
Recommended.
Ideal (non-touchscreen) display for the Raspberry Pi. Myriad inputs inc HDMI for the Pi and all necessary connection leads including a flat HDMI lead which is easy to route. The 1024×786 resolution is good enough to use with the Pi. The case and stand are well made. My only criticism would be some light bleed thru around the edges but with a non-black background you don’t notice it – plus you get what you pay for. As a Prime subscriber I also got a further 4 off the asking price which made the entire package extremely good value.
Recommended.
It has some sort of VESA mount. I’m saying some sort of, because the holes aren’t standard; it’s about 75×70, instead of the VESA standard 75×75. I solved this with my Dremel rotary tool, I enlarged the holes in the support (NOT the monitor… lol). Also, you need very short screws, there are some connectors behind the lower holes.
I am powering a Raspberry Pi Zero W from the USB port and it has no issues, the power is enough and the voltage is stable.
First I got a monitor with a dead USB port, but after a few messages with the seller I was sent a replacement that works properly, so 5 stars for that too!
It has some sort of VESA mount. I’m saying some sort of, because the holes aren’t standard; it’s about 75×70, instead of the VESA standard 75×75. I solved this with my Dremel rotary tool, I enlarged the holes in the support (NOT the monitor… lol). Also, you need very short screws, there are some connectors behind the lower holes.
I am powering a Raspberry Pi Zero W from the USB port and it has no issues, the power is enough and the voltage is stable.
First I got a monitor with a dead USB port, but after a few messages with the seller I was sent a replacement that works properly, so 5 stars for that too!
It has some sort of VESA mount. I’m saying some sort of, because the holes aren’t standard; it’s about 75×70, instead of the VESA standard 75×75. I solved this with my Dremel rotary tool, I enlarged the holes in the support (NOT the monitor… lol). Also, you need very short screws, there are some connectors behind the lower holes.
I am powering a Raspberry Pi Zero W from the USB port and it has no issues, the power is enough and the voltage is stable.
First I got a monitor with a dead USB port, but after a few messages with the seller I was sent a replacement that works properly, so 5 stars for that too!
Brilliant monitor. My neighbour was broken into and the thief had to pass my garden. Told the police they could look at my cctv and they both said it was the clearest one they’d seen and asked for the make so they could get the same one which obviously I gave them.
Great product for an extra monitor, although it took some tweaking to get the resolution right but otherwise very happy
Very quick delivery. Cables for all combinations of set up. I’ve set mine up as a monitor to replace my full size one that has decided to pack up on me. Very easy to set up attaching the VGA cable to one end of my CPU and the other to the monitor plugged in Power cable and it came up straight away. very pleased.
Lots of features, good picture quality and “whole” positive choice, of product to fulfil the task required by the use of the product, i.e. CCTV monitor on your office desk. Also great for a larger screen for your smartphone.
This well packaged monitor comes complete with connecting cables and clear instructions (except for the stand assembly). Quick to set up, plug and play. Nice and clear- very impressed for the money.
Purchased this item as a non intrusive monitor in a busy home study to monitor my cctv. Excellent picture provided by the HDMI slot. Highly recommended.
This Mini Monitor was much better than I was expecting it to be for the price. The build quality is very high, and the screen is very clear. It has lots of different input ports, and nice controls. This is perfect to connect to a Raspberry Pi, or maybe even use as a secondary display. Very pleased with my order.
I bought this monitor to add as a display for my security CCTV. It arrived today and is just perfect for the job. The screen is very clear with no dead pixels. The refresh rate is good and has a multitude of connection options available with three different types of connection cable included in the box. It has a number of ways to mount the monitor: on it’s stand, stuck to the wall or with holes provided for vesa mount.
In my view an absolutely wonderful purchase.
It seems to work well enough, but as with all 10″ monitors, as far as I can tell, there’s no provision for portrait orientation. I had to buy a swivel arm with 75mm holes to achieve it, and even then I struggled to find screws that would fit the threads in the monitor – and I’m not convinced they were actually the right thread. Four screws supplied would have solved that problem, but an option to mount it on the supplied base would be better still.
Very good use, screen and sound are very clear. As a camera monitor is very suitable, can also be used as a game display and it has lots of components for multiple devices.