HUANUO Dual Monitor Stand for 17-32 inch Screens, Height Adjustable Gas Spring Dual Monitor Arm, Full Motion Monitor Mount Support VESA 75×5/100x100mm
- Have you ever complained about the limited space in your workplace?
- Have you ever had neck, shoulder or back pain at your desk after a long time?
HUANUO Dual Monitor Stand is the perfect solution for an efficient work result.
Stacked 2 monitor arm for faster surfing. Both monitor size up to max. 27 inch.
Note: When two monitors are stacked, the distance between two VESAs is max.37.5 cm. For example: A and B ≤ 27 inch or A > 27 inch and B < 24 inch. (Because there are too many types of screens on the market, the size here is only for reference.)
|
|
|
---|---|---|
Premium gas spring after 25,000 tests, without stuttering, smooth and noiseless adjustment. Tip: After installing the desk monitor arm, be sure to push the air pressure arm down into the horizontal position to adjust the resistance. A: If the PC or monitor drops after installation, use the hex screwdriver to turn it in the + direction to increase resistance. B: If the PC or monitor moves up after installation, use the hex screwdriver to turn it in the direction to decrease the resistance. | Two mounting options with the Almighty Toolkit – C-clamp Mounting: Your table should not be thicker than 7.5 cm. – Grommet Mounting: Your table should not be thicker than 10 cm. (Hole diameter: 1 cm-5 cm). | The cable organizer helps to store disorderly video cables and power cables, which optimizes the office environment and saves space. |
Dimensions: | 44.1 x 23.5 x 18.6 cm; 5.3 Kilograms |
Model: | HNDS8-E |
Manufacture: | HUANUO |
Origin: | China |
I use this to hold 2 different size monitors, the ease of adjusting this arm means that I can set each of them independently at just the right height. Assembly was straight forward and I am pleased with how firmly the monitors are held
This vesa mount works great, unfortunately one of the bolts for the clamp mechanism was stripped so we used the grommet solution instead. Other than that, it’s good.
Really well designed and made. Feels and looks really premium. We’ll worth the money
Can easily adjust the height and position of the monitors. No wobbles!
easy to put together and does what it needs to
Great item, gas lift took a while to get round but bith monitors don’t sit flush (exact same monitors) there is no way to rotate to lock in positio
Eenvoudig te monteren. 2 monitoren van 27″ eropgezet en is geen probleem. De stugheid van de gasveren zijn in te stellen met de meegeleverde inbussleutel. De monitorarmen zijn flexibel. Zorg er wel voor dat je de scharnierpunten zodanig aandraait dat het niet te slap of te stug wordt, anders is het niet flexibel. Uitermate blij mee!
Lo compr por 55 , el soporte est bien, tiene consistencia y permite montar dos monitores con un peso mximo de 8 kg e incluso algo ms cada uno, cuando otros por el mismo precio solo te permiten hasta 4,5. Lo tengo soportando un 34 pulgadas perfectamente.
Calidad de materiales decente.
Very easy to set up and follow instructions. These came well packaged and are a great addition to my desk, cable tidies included meaning I can have almost no visible cables on the desk.
Slight adjustment needed to allow for the weight of my screens.
Did as it said on the box. Overall happy with this item
Very easy to set up and very sturdy. Great produc
I wanted a stand that’s easy to move monitors around and this is perfect. I can work side by side with my partner with a monitor each on the desk, as the arms pull far enough to each side of our long desk.
A little more costly than the basic ones but worth it for the extra features.
El paquete ha llegado bien embalado y montaje muy sencillo todo de muy metal muy rigido y queda muy bien esteticamente y te ayuda con el desorden de cables y te de mucho mas espacion en el escritorio
Lo negativo es que si lo tienes pegado a la pared los movimientos son mas limitados y ten en cuenta que debes tener cables suficientemente largos de los monitores y por ultimo el tema de la tension de la balvula de aire es un engorro por lo demas recomendadisimo
I have a 31inc and a 21 inch screen on this sand for my stream as I’m in a small area and it excelle
Pluspunten:
– Relatief eenvoudige montage
– Inbussleutels voor montage zijn inbegrepen
– De basis voelt zeer degelijk aan
– Kabels kunnen netjes weggewerkt worden
– Veel stelmogelijkheden
– Redelijk goedkoop voor wat je krijgt
Minpunten:
– De losse plastic delen die erbij zitten voor kabelmanagement en de afdekkapjes zijn qualitatief gelijk aan een happy meal speeltje.
– Als je een monitor hebt met meer dan 4 kabels (als er een usb hub ofzo op zit) dan is het lastig deze via de arm te laten lopen, is niet genoeg ruimte in de kabelgoot.
– De afwerking van de metaaldelen had beter gemogen.
sehr stabil, hlt super ( auch wenns manchmal so aussieht als brichts gleich ab)
das einstellen der strke der arme ist bei sschweren monitoren echt nicht leicht
am besten macht man das zu 2. knallt der monitor 1x hin wirds rgerlich…
ich habs alleine gemacht und hatte immer angst das der monitor gleich runterfllt…
Il prodotto fa egregiamente il suo dovere: stabile, robuto e maneggevole. Quest’ultimo aggettivo perch permette ai monitor di ruotare leggermente ed avere libert di movimento, anche dopo averli montati.
Il montaggio veramente facile, seguendo le istruzioni me la sono sbrigata in non pi di un quarto d’ora. Tutto eccellente. Sicuramente se qualcuno avr bisogno di un sistema come il mio (in foto risulta chiaro) mi trover a consigliare questo prodotto.
It was relatively easy to assemble, saved a lot space in my desk, and after mounted is pretty easy to adjust the monitors and any position that suits you.
Also ehrlich? Der Aufbau und die Montage war easy einfach. Alles da und in, nach meiner Meinung, sehr guter Qualitt. Passgenau fr meine Montore. Jetzt ist auf dem Schreibtisch richtig ordentlich und ich kann sogar unter den Monitoren sauber machen … Alles so wie ich es mir vorgestellt habe. Und das auch noch fr einen akzepablen Preis, wenn ich mir die anderen Teile angeschaut habe.
Vollends zufrieden und kann ich nur weiter empfehlen.
Produit de trs bonne facture pour un prix raisonnable, se monte assez facilement. Pour les gens ayants 2 crans c’est un must have. Trs satisfait de mon achat (les visses de fixations sont fournies pour cran ayant un arrire plat et courb).
ist wirklich qualitt tadellos
zur haltbarkeit kann man noch keine aussage treffen
hersteller verspricht 5jahre auf gasdruck
Great stand. Very sturdy with 2 samsung 28 inch monitors on. Easy to assemble. Only thing I didn’t understand at first was how to tension the top of the arms. It becomes apparent when the monitors are on the stand by pushing the arms down to reveal where he Allen key is used. I put the monitors on the arms before putting them on the stand which seems the quickest and easiest way to set it up.
Sehr schnelle Lieferung, top Qualitt, tut genau das, wofr ich es bestellt habe. Schnell zusammengebau
Expect to get exactly what you pay for. The arm works but the build quality is inferior compared to high end monitor arms like Ergotron (i have 2 different style dual arms). I chose this for my old monitors i use in my “workspace” area where the monitors are mostly stationary where I do thinkering with electronics etc. I would not use these for my desktop computer setup, even if it means paying 3-4 times the price.
Leider ist die Gasdruckfeder fr ein Gewicht von was wei ich wie viel Kilo ausgelegt. War sehr mhsam die Gasdruckfeder fr ein Gewicht von 3 kg einzustellen, da man mit seinem gesamten Gewicht den Arm herunterdrcken muss um an die Stellschraube zu kommen. Ansonsten sehr praktisch und gut einstellbar. Bin zufrieden.
J’ai utilis ce support cran pour un cran de 27″ et 24″ Je le trouve trs robuste. les bras se rgle facilement. Aucun soucis a l’installation ainsi qu’a l’utilisation !
LO tengo puesto con 2 monitores de 24, uno encima del otro y funciona de maravilla. Fu facil de montar.
Selbst als Frau komplett allein aufbaubar .
Alles vormontiert und fix aufgebaut.
Very sturdy Arm(s). I would highly recommend.
It’s Modular so you don’t have to have both arms attached if you don’t have 2 monitors!
I wouldn’t recommend putting anything over 27 Inch on the arm(s) though as I can see how it may not be able to support the weight.
Really happy with this purchase!
Hey guys, I don’t normally bother with reviews but this one impressed me so much I had to…
Really solid, and fully adjustable, literally hasn’t budged since I put it up, and those monitors arnt the lightest great for the money
I wanted to mount two fixed Samsung monitors to my desk. This fitting was very easy to put together and is very sturdy. It comes with the ability to either drill the desk and pass a mounting bolt through it, or with a clamp that clamps over the edge. I used the clamp and it is certainly up to the job. You need to play with the settings on the spring loaded arms to adjust for the weight of the monitors so they are neither dropping down to the desk or springing upwards – but this is easy with the Allen key provided. All in all a tidy and easy installation. The instructions do warn you, but be careful when removing the packing straps from the spring arms, they will try to take your teeth out when first released!
I have had a fair deal of mounting arms and these are very good (especially for the price tag)! Easy to assemble, very smooth when moving them around, yet they keep their position very well.
Highly recommend!
*1 caveat (no flush to the wall desk ability)
Positives
Took approximately 30 mins to assemble, install and set-up
Arrived well package, nice and secure no dents, scratches or pressure marks in the black coating
Nothing to make you jump, especially where the adjustable arms are concerned, safely secured with velcro.
Great to have two options for mounting to a desk, I opted for the adjustable screw mount , just in case I wanted to move or adjust at a later date.
Brackets feel stable, not a great deal of instability or wobble
A decent amount of cable management features provided
For the price id say it worth it, although I expect other brackets of this type will suffer from the same issues as listed below
Negatives
As per usual poor quality Allen keys (slippy and awkward soft ferrous metal), if you are in an office or dont have tools to hand a decent screwdriver handle with fitting bits would be better ( but expect that cost issue).
I have 2 iiyama 27″ screens – I did expect a little more adjustability, some reviewers have mentioned the over hanging (the desk) element. The larger the screen you go the further the armature extends across the back of the desk ( you wont be able to push the desk back to the wall, it will need to move further forward, I treated it like a puzzle at first thinking id had installed it incorrectly.
In the images the screens are at least 6 inches further forward as is the desk from the wall now, in effect losing the ability to move screens back due to the elbow of the bracket hitting the wall behind (ok if you have more space I suppose)
If I work out a solution or if anyone chooses feedback on this review, very happy to update and feedback on my experience
Did not realise you had to use an Allan key to tightin the arms in place where u want the monitors. I thought you could easily glide them into whichever place you want. Otherwise sturdy and perfect for my sons gaming monitors. He was delighted
Mounted my 32 inch monitor and my old 4:3 15 inch together and the arm is holding up well. The arm itself is solid as a rock but the same can’t be said about my Ikea Linnmon table top. Unless you have no other choice(like me) I recommend mounting it on a better made table top.
Great product, easy to assemble with nicely written manual, the only tool you need is Philips screwdriver, hex keys comes in a package, holds 27″ dell ups gaming monitor with ease, as a matter of fact I had to soften the tensioner as it was pushing monitor up to the top so I believe it can stand to what it says on the box that it will hold up to 32″ monitor. Just bought second one for my wife. Well done to the manufacturer 🙂 the only thing I would suggest is a bit more of cable management hooks on the arms but it still have enough to keep the cables in place.
This has made my working environment so much better will buy another for my studio, the ability to put the screens just where you need them and there being no stands to clutter up desk space is just fantastic.
Quite expensive but you get what you pay for!! Excellent quality and great monitor stand. Buy this and you won’t be disappointed!
An exercise to put together but great in the end.
Got this installed with a 34 inch ultrawide and a 32 inch TV and it seems study. 5/5
Took a little while to tweak the set-up but successfully mounted 2x 28″ screens & freed up loads of desk space! Exactly what I wanted.
Very strong and positioning is great. Assembly is very straight forward with instructions supplied. Saves me a lot of table space. Highly recommended.
Excellent monitor stand. Easy to install and very sturdy. I’ve fitted my 32″ curved screen on one arm and a slightly smaller flat screen on the other. Moving the screens is really easy and they stay put in the position you set them. Gas strut and tilt is adjustable for the weight of the screen.
So far so good. Had a few weeks now and not noticed any ‘drooping’. Can arrange monitors in multiple ways.
There are easy to set-up out the box with the usual tweaking required with these types of arms to get right.
Would recommend.
A great dual monitor arm with bracket fitting or grommet fitting options, very sturdy and easily adjustable. Very happy with i
This was a great purchase! I have mounted a 32 inches Samsung G7 and a 29 inches Samsung monitor. 3 weeks after it really keeps the monitors, created a whole lot of space in my desk. It can definitely handle a 9 kg monitor. Do not be afraid!
Monitor samsung 24” curve and LG 32” flat….very easy to assemble and very strong.
I have just assembled this monitor stand and connected up two 23 inch monitors. Have to admit very impressed. The build quality is excellent – very heavy duty and feels very solid. I was a bit concerned it may be plasticky and lightweight but it is not. I was also concerned it wouldnt work on an Ikea desk/table I am using at hokme which is fairly lightwight and only about 3 cms think – again all fine an no issues with that. Any wobble is coming due to the table and not the monitor stand.
Couple of things to note: The cable tidying features are good although the how to use the bottom sets on each arm with two cables was beyond me so used the top ones and just fed into the stand cable ties. Does the job fine. Also instructions on how to adjust the gas arms was a little confusing but once I knew to turn the adjustment screw a lot to balance the screen they really work well and hold monitors still but still allow me to move up and down to suit as needed with no tools.
Someone else made a similiar comment but if you desk is not that wide and you want the screens failry close together, the bottom parts of the arms need to stick out behind the desk so you cant have it pushed right back to a wall. I would say I have had to move desk out 10-15 cms from wall to work.
Overall though very pleased and impressed with this and would recommend. I got on a lightning deal with a voucher but even at normal price of 50 ish these are wll worth it.
Fantastic product, the manoeuvrability and positioning opportunities are great. The arms very sturdy and have no problem in holding both my 24 inch monitors, which is good for DSE at home.
Great product which allows me to adjust my screens when I want to. Which as I adjust my seating position occasionally, helps a lot.
I can also fit my laptop under my main screen and adjust the screen height depending if my laptop lid is opened or closed (great when I need the camera).
Installation was a little tricky as I have a hole already in the top of desk, for cables to come through, which was about 5cm diameter. This hole was to wide for the mounting plate supplied (for hole fitment) however I managed to adapt with using the other fitting method (over offers of desk) on the hole. Once that was secured in place the rest was a breeze.
Very happy with this monitor mount. i’ve installed it twice within the space of 2 months, firstly via drilling a hole in what is now my old desk, then using the clamp with my new standing desk. It was great that they come with both options.
Be warned though, with these type of monitors, firstly you’ll need space behind the screens and therefore desk for the arms to extend back to if you want your monitors to sit flush next to eachother, so not good if you want your desk right against a wall. Secondly they probably work best we a deep desk, at least 70cm, so that you don’t end up sitting so close to them if you don’t have much space for the arms to go back into when flush.
For the type, I cannot fault the build or design. Just make sure you have the space to be able to use them.
Arrived on time and in perfect condition. Currently supporting one 27″ and one 24″ screen with no problems. The tension adjusts are ideal for customising support for screens of varying weight, preventing arms from drooping or the screens from rotating downward. Adjusting a quarter-turn at a time seemed to be the ideal method to get things spot-on. The cable guides are also very useful, with an external cage near the screen end and a covered hollow in the arm near the base, although if you have a full range of cables plugged in, like two HDMI, one DP, audio and power, you might struggle to squeeze them all into the lower guide. In spite of this, the cable arrangement behind my screens is now much tidier with less of a spider-nest evident, and also more logical as I’ve been able to use shorter, better organised cables.
Note that the arms are a little bulky, which has a pro and a con: It does make you feel confident your screens will not spontaneously drop, but if your desk is next to a wall it can make your screens stick out a little farther than expected. I’d strongly advise measuring screen width and getting the arms in roughly the correct position before securing down. Also, moving the main support to the side to have a screen central seems to work well.
All in all, it’s fine. I’ve used screen arms that are just terrible, drooping overnight so you need to readjust every morning, but it’s been a week now and neither screen has moved at all, which is basically what you want as a minimum.
Really pleased with this product. The item was fairly straight forward assemble and I was pleased that it fitted the thickness of my desktop (approx. 1cm)
Instructions only display the installation of one of the two cable management clips, recommend thinking where you want them BOTH before fully assembling.
Adjusting the tension on the arms didnt initially feel like it was doing anything but after many turns of the allen key it did exactly what it was supposed to.
The cable management solution on the arms is very tidy. I would urge anyone assembling to ask for the help of another person, as a second pair of hands would be advantageous whilst trying to screw the screws in and holding the cables in place.
Currently supporting two 24″ monitors, positioned exactly how I wanted them above my laptop. Recommended.
In the description for the product, it mentions chipboard tables are typically unsuitable. As a weaker material this makes sense. I have a desk made out of MDF, which is typically stronger. However, I believe that what the product description should actually state is a minimum desk thickness – as I experienced an issue where the C clamp would come nowhere near clamping my desk. I did work around the issue by clamping an additional piece of wood leftover from the desk’s construction, to achieve a suitable thickness. So I wouldn’t describe my issue as a failing of the product itself – in fact I rather like it – but rather I think the description could benefit from an update to state what the minimum desk thickness is when using a C clamp.
I don’t believe I would have experienced any issue had I used the grommet mounting method – however, I did not wish to drill a hole into my desk to achieve this especially prior to knowing exactly which mounting position would work best for me.
It is really easy to install and the instructions are pretty clear on what you have to do but if you are using the grommet plate the make sure that your grommet is small enough because the t plate that holds everything in is quite small but except for that a really good produc
I have two monitors above my desk on this. Extremely good purchase easy to set up solid and looks great.
well built and good quality considering the price , recommend to all
This is the third different dual monitor arm I’ve tried from Amazon and by far the best and sturdiest. He arms are gas powered (I think??) and the ease of manoeuvrability is crazy! You can move them anywhere with ease and they feel completely supported and solid. Arms also look better than previous ones I’ve had – couldn’t recommend this product enough. I’ve got two 32″ 4K Samsung monitors on it and it holds them brilliantly, not an issue with 2 larger screens at all.
Study and easy to use, holds two 27 inch curved monitors which can be rotated in portrait mode.
Great value and a fantastic product easy to install and a very happy so
This is a very sturdy and easy to mount double bracket I absolutely recommend i
If your Connection on back of Monitor is Off Centre, it will hand strange, be aware of that., but otherwise it’s good
This product is just what we were looking for to raise our screens from our desk to eye line height to alleviate the stress on our back and neck.
Great stand for my desk, it’s freed up so much space and saves me bending over a monitor. My back is much better for being able to sit upright.
Assembly requires a bit of planning – read the instructions first and follow the sequence!
I searched a little bit around on Amazon and finally chose this. Slightly expensive than other similar products but i checked the review looks like it is easy to install and can easily move the monior up and down and also 360 around. Which is correct!
It takes me half an hour to install it and you don’t even need to drill any hole on your desk. Now i can move my monitor up as for standing work in few second. Just that this is not cheap, even around 2 times price than other similar products. But I would stil recommend it.
Really easy and simple to setup meaning I have loads of space and can adjust the arms with the slightest of efforts. If anything changes I’ll update this review but for now I’m really impressed by this. It took me a little while to get everything built and connected but that was due to stubbornness and wanting to do it alone, could be done in a matter of minutes with 2 people
I bought this to supplement my Ergotron LX monitor mount (a much higher priced premium mount). It really is very robust and easy to put together, and can stand toe-to-toe with the Ergotron (for manoeuvrability and sturdiness). Bear in mind that I paid about 40 in the Black Friday sale, whereas the dual-mount Ergotron is closer to 240! For that I can live with it looking a little more utilitarian, after all it is hidden at the back of the desk!
Currently I am using only one monitor arm. This works fine and gives me future expandability.
At the price paid, or even a little more, it’s an absolute bargain.
A very sturdy and strong twin monitor arm. A good cable management system.
Very easy to install. 2 x 24″ monitors. No sag like other arms. Tension screws for heavy screens.
A very good product, well built and a great price.
Been great so far. Very easy to set and and had excellent articulation on each of the arms. Highly recommend for a dual monitor set up.
Easy to assemble, great for WFH , makes desk more spacious.
I was going to say that these are great for the money, but they’re great even if they cost a lot more.
Pretty straightforward to put together and the clamp is really secure.
I’m 6′ 2″ and work at a standing desk. I had struggled to get something that I was confident would dot high enough to be comfortable. These are perfect and would work easily for someone much taller.
Fantastic, sturdy and easy to assemble. Glad it comes with all the screws too!
Very solid product. I have bought a second 4k 28″ monitor in addition to the 27″ HD on the right. Superb positioning options and the mount just using the clamp is rock solid. Gas arms are perfect for these 5-6kg monitors. Actually more desk real estate than with the stands. Also much better position as my eyes are level with the top of the monitors.
This is a replacement to my previous monitor stands, when I first installed I was a little worried that won’t hold two 27″ Monitors but after tightening the screw it kept the monitors in place and secured.
It moves on a lot of angles and it’s easy to move or down because of the gas spring on the arms.
It works as you want and it very well constructed
Brought this product for my son. He’s extremely happy with the set-up and how much space has been made available from getting rid of the monitor stands, he got it built and up within 30 minutes. He was extremely happy and exactly what he told me he needed.
It’s handy , not very difficult to assemble and the result & view of the screens rewarding . Just ensure the screens you bought have VESA standard mounting holes .
I would add pictures but I don’t think there is much benefit over the pictures already supplied. Item is as described. Stand is sturdy and for the most part very easy to set up. I did struggle with installing the cable management clips but to be honest I didn’t spend much time at it and I was happy to use cable ties (and the supplied Velcro straps) to tidy up the cables. I’ve a 24in and 27in monitor set up horizontally; I was initially doing to set them up differently, but upon review I wasn’t happy with that setup so I’m delighted I chose a mount which enabled me to try various layouts. Closer to 5 stars than 4, but I don’t want to give a perfect score due to the little hiccup with the cable clips.
PROS
Very easy to assemble
Sturdy with just the desk clamp
Look good when it is set up
Would recommend
CON
A lack of feature to improve on the minimum extension of arms. How far back you can push it away from you , for example if your desk is against a wall you can only push the monitor away from you until the stands arms hit the wall ,10 inch is the minimum ( by my measurement ) from back of the monitor to wall ,then stand arm is touching the wall.
Easy to assembled. Good quality of product. I have two 32inch monitor holding on this product. No problem.
Bought to mount 2 new 34″ ultrawide monitors originally. The stands for my new monitors are adequate, so ultimately not needed for intended use. However, my significant other has 2x 28″ 4K monitors, and needed them to be raised higher off the desk than the existing mount allowed. Enter this item.
Assembly is simplicity itself, and the unit is sturdy and has a quality feel about it. All done and dusted for installation, all that was left was to mount the monitors and adjust the gas lift tension mechanisms to the proper balance. All in, this whole process took perhaps 20 minutes. Super happy with the stand and thoroughly recommended.
Literally the best monitor arm(s) I have come across, and I work in IT. The arms arm easy to setup, perfect for a stacked monitor layout. People are saying their monitors are “too light”, which is a load of bs as you can adjust the arm, just read the instructions. My bottom monitor is 25″ and the top one is 24″.
Great sturdy device, does what you want it to do
This are so nice and flexible. They hold my 25inches monitors
Brilliant had to loosen a lot of it but very happy with i
Purchased this after returning many others from other stores which didn’t fit despite being labelled universal. This mount guys perfectly and is very sturdy.
Very pleased. Item is as described and was delivered promptly.
I would highly recommend this product. So convenient, especially now that I am working from home, so have my home office look more organised. I love it. Perfect, just what I needed, gives my screens an elevation and allows my desk to have more space for other stationary.
I got the dual monitor mount and am very happy with it. It was easy to set up and hides cables well.
Needed a monitor stand to work from home, so decided to choose this one. It was really simple to put together and install, and also nice and sturdy.
Have 2 24 inch screens on them using the clamp. Really easy setup, much easier than I thought it was going to be. And it looks great. Clears up alot of space on my desk. Now that i’m working from home, it was a massive help with desk organisation and keeping my screens elevated to stop back pain.
I like it as i use it for my office its the perfect item to use my pc and small tv in same time. Easy to setup as well. The price is fair enough
It was bought for my son and he is very happy with it. Sturdy materials and two monitors look nicely side by side with plenty of desk space. It needs to be a solid wooden desk though. It looks like it’s made to last.
Very good item, the instructions could have been alot clearer but very solid item
I used just one arm to mount one 28 inch monitor above my other one and it is exactly what I was looking for. Easy to install and a solid mount. 10/10 would recommend.
The item is great. I have combined it with a VESA compatible laptop holder for quick switch out between my home laptop and my works one.
The stand is very easy to put together and use. Adjusting the position of the monitor and laptop is very easy. The connection to the desk is simple and provides a very sturdy base despite my desk only being 2cm thick. The cable routing can accommodate lots of cables and it keeps it all nicely hidden and neat. In one of the arms I currently have 3x USB cables, laptop power cable, speaker cable and HDMI cable.
I would recommend this stand over some of the more expensive ones.
It’s ok. Given an extra star as I think I was having a bad day. To get both monitors which are 24.5″ I’ve had to move desk 10 cm from the wall. Not really noticeable. Keeps cables tidy and very sturdy product.
First time purchasing monitor arms. Advised to go for gas powered with a a capacity weight above my screens weight by 2/3KG to avoid screen dip. Couldn’t be happier with this product. Real quality right the way through. No dip issues, solid build, easy to put together, all screws plus extra included, the only thing I needed that wasn’t in the box was a phillips screwdriver. Great product.
Exactly as expected, except the clamp mount is a little wobbly but that’s probably down to the table surface its mounted to. Bit awkward to work with but once you figure it, they work fine
I own the LG 27GL83A-B an amazon exclusive monitor. the VESA mount for this monitor is indented in a square shaped hole. This Dual Monitor mount would not fit and therefore I could not mount it. If your VESA holes are slightly indented then be careful as this mount is unnecessarily large. My current Duronic arm fits fine however I wanted to purchase a double monitor arm.