Konig & Meyer Omega omega keyboard holder- 1881

 

This is the second K&M Keyboard stand that I’ve purchased. I like the simple and rapid adjustability of the stand. It is one of the sturdiest keyboard stands that I own. I prefer table-style keyboard stands to the “X” and “Z” styles, which are adequate for lighter weight keyboards. For a heavy 88 key synth or stage piano, the table style gives you more stability and more leg room to operate pedals for the instrument. Highly recommended, and a bargain at the price.

 

I bought this to replace an X-frame stand which couldn’t be adjusted to exactly the right height and which stopped a chair or stool from being put underneath the keyboard. This stand is 100% better than its predecessor. It is easy to put together, has lots of adjustability and it is very robust and solid. I can sit comfortably with my legs beneath the keyboard and after playing I can put a chair fully underneath the stand. It’s a lot of money, but in my view worth it.

 

It came 2 days later than I expected but it’s worth it I guess. I wanted to use it for my slim electric keyboard but it was slightly and it’s better for heavy-duty. It’s super cool. I recommend it.

 

Schnell geliefert, schnell aufgebaut, sehr stabil – Herz was willst du mehr ?

 

Gran robustez y estabilidad. La nica pega es que sobresale del teclado ya que tiene bastante profundidad, bastante ms que el teclado en si.

 

I bought this stand for a Hammer 88 keyboard that is rather heavy. It holds it really well. I put some casters on it to roll around in my studio. Very easy to adjust the height.

 

Sehr stabil und leicht aufzubauen – ich bin sehr zufriede

 

Well worth the money. Really sturdy. Clever design. Fairly elegant piece of ki

 

Expensive but worth it. Holds the 88 keyboard rock solid as I pound away on it.

 

Sehr stabil und sehr gut verarbeitet. Volle Beinfreiheit. Das Gestell steht bei uns im Wohnzimmer und sieht ganz ok aus: nicht so monstrs wie die festen Unterbauten aus Pressspan und mind. genauso stabil. Es lsst sich recht schnell auf- und abbauen.

 

Using for home studio set up.
Very nice. Great adjustability.

 

Sure it costs much more than their competitors. But it’s good, well designed, and sturdy, while theirs are not. Plenty of room for your legs, which is super important. No wobble. And the unit is not too deep, so things don’t protrude out of front or back. I got the whole shebang with the table: 2 vertical rod supports, a laptop stand, and a sheet music holder. See the photo of how it all pulls together. The latter cannot be bought in the US and has to come from the UK. Amazon will offer you to purchase from their UK site, but you don’t want to do that. If you want to get from Amazon, go directly to their UK site, otherwise they will tack on a sales tax (!) to your order. But there are other UK vendors you can find and some of these may be a bit less expensive. I don’t understand why the UK prices are about half the prices in the US, but that’s the reality. You have to factor in shipping costs if you get from the UK, but for the smaller items you can still save compared to buying locally.

 

It doesn’t wobble like most other stands. Very happy with the quality.

 

I purchased the K&M 18810 table stand for my Kawai MP11SE. The MP11 weighs ~80 lbs and this stand carries it no problem. I had an X-Stand before, but the cross bracing would get in the way of my legs.

With normal play, the stand does not move at all. Putting force on the keyboard does have a very small amount of movement. I suspect that the K&M 4 leg table stand would be a bit more stable, but this works perfectly for me.

 

Stylish and well made. I bought the stand to use with my Yamaha keyboard. I used it on a recent gig and it was easy to set up and take down, sturdy and looks really good.

 

This is an amazing quality keyboard stand. Too bad it’s $200, but when you feel the quality of this solid steel you’ll know your money went to good use. It is imported from Germany, which is part of the reason it is expensive.

I wanted a stand that offers legroom underneath (so I didn’t want an X stand), is expandable to have at least 2 tiers total, and has wheels.

This one has excellent legroom, it’s perfect for sitting down at my desk and have a keyboard in front. I cannot attest to standing, but it has a lot of height settings that are spaced in approximately 0.75″ increments. I love it.

Next, it supports not 2 tiers, but THREE tiers!! In 2018, they released two new part numbers called the 18811 Stacker and the 18821 Stacker. 18811 adds on as a 2nd tier, and 18821 inserts into 18811 to give you a third tier! Not only that, but you can get the aluminum tray 18819 and turn one of your tiers into a platform!!! I have ordered it and am going to have my synthesizer on the main tier, and maybe a TB-03, TR-09, and Ableton push on that 2nd tier!

Lastly, the wheels. I ordered 2″ DICASAL stem casters from Amazon. They are made of “PU foam” (aka polyurethane/rubber) – very durable and are rated for over 600 lbs of weight as a set of 4.

To install them, first I wanted to remove the bottom 4 pads to reveal just the metal frame. This way the wheels are attached directly to the metal (more stability), and also the pads added a bit extra height, and I wanted to keep it as low as possible since the wheels are already adding another 2.75″ of height to the stand. To remove the pads, look at the underside and you’ll see a hole. There is a plastic rivet holding it tightly in place. I used pliers and some small but very strong scissors to break those off. This way, the pads slip right off and you can put them back on anytime.

Next, I drilled some holes. This was tough for me since I’m not used to drilling metal, but here’s what I did:

Step 1: use a 1/8″ drill bit (I’m pretty sure I used a titanium bit. Needs to be good for drilling steel) and put it through the hole where the rivet was and drill all the way through to the other side of the metal. Do this for both holes on both feet (so you’re drilling 4 times). This way, you have perfectly aligned holes which you will use as a guide to drill a larger hole.

Step 2: For the holes on the upper side of the feet (e.g. you would see these when the stand is upright), drill 3/8″ holes. This is enough space for the stem of the caster wheel to go through.

Step 3: For the hole on the underside (this is hole already exists because it’s where the rivet went), drill a 13/16″ hole. I didn’t have a 13/16″ drill bit, and in fact it may be very difficult to get such a huge drill bit to cut this. So, I drilled using the largest drill bit I had close to 13/16″ (in my case 3/8″ was the closest I could do). Then, I used a tungsten carbide cutter (9903) dremel tool to make the hole the right size. Pretty much, you need it to be about a .8″ hole. Accuracy is not needed here, you just need the caster wheel to fit through the hole properly so that the weight of the stand is evenly distributed across the entire round platform of the caster (and not just the screw/bolt of the stem).

Step 4: I screwed on the caster wheel, and it’s done! (I added some loctite threadlocker blue 242 to each screw so the bolt stays on tight and doesn’t loosen while I’m moving it around, since the stem length of 1″ just perfectly has the washer screwed on with no room to spare).

This thing feels very sturdy, and I can lock the wheels as needed. I just set this up and am writing this review while it’s fresh in my head, but will provide an update if anything changes!

UPDATE: I received the 18811 Stacker and the 18819 keyboard tray today. It is amazing!!! Just see the pics. I wish the tray was wider to fit more stuff though.

 

This is a very durable keyboard stand. It is a bit pricey but is worth every penny. Best stand I’ve used yet.

 

I’m convinced this is the best keyboard stand made. It was expensive, but it’s rock solid. I doubt I’ll have to travel much with it, but couldn’t think about going back to an X-stand at this point.

 

OUSTANDING PRODUCT AND GREAT SELLER ALTHOUGH WOULD PREFER A FEW MORE QUICK DISCONNECT FITTINGS RATHER THAN WING NUTS.