Makita DHR202Z 18V Li-Ion LXT 20mm SDS-Plus Rotary Hammer – Batteries and Charger Not Included
Makita DHR202Z 18V Li-ion LXT Rotary Hammer – No batteries included
Cordless 20mm Combination Hammer, SDS Plus Bits
The DHR202Z SDS-Plus Rotary Hammer is capable of drilling through steel, wood and masonry with ease. 3 mode operation, rotation only, hammering with rotation and hammering only. With the built in torque limiter, clutch disengages the motor should a bit bind.
Battery protection circuit protects against overloading, over discharging and over heating. Rubber joint construction suppresses transmission of vibration to battery, minimising battery failures due to terminal breakage or poor electrical contact.
40 different chisel positions
LED light illuminates drilling surface for more productivity in low light applications
One touch sliding chuck enables quick and easy bit changes
Depth gauge for increased drilling consistency
Variable speed trigger
Electric brake
Accessory shown not included.
Capacity:
- Maximum in concrete 20mm
- Maximum in steel 13mm
- Maximum in wood 26mm
- Up to 4,000 blows per minute
| Weight: | 3.2 kg |
| Size: | Body Only |
| Dimensions: | 9 x 38.5 x 24 cm; 3.2 Kilograms |
| Model: | DHR202Z |
| Part: | DHR202Z |
| Colour: | Body Only |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Makita |
| Colour: | Body Only |
| Quantity: | 1 |
| Size: | Body Only |
| Volume: | 1 Cubic Metres |
This is a good product.
Usual Makita quality does the job and no trailing power leads great bit of kit.
Great piece of ki
If you need to drill into steel or concrete or have to demolish something equally hard, this drill with its hammer function is the perfect tool for the job. Goes through concrete like a hot knife through butte
Hammered all day every day for years .. 900mm long 25mm sds masonry bits ..25/32 mm bosch spade bits ..chasing …in the same time our dewalt 18v sds 3years newer has been repaired 4 time and is still not a patch on this.
Buy it .. you won’t be disappointed.
Arrived really quickly, brilliant bit of kit!
The hammer-stop is a great feature for chasing out walls
Should have got one years ago
Got this to fix things to the walls of my sons newly purchased flat. Really, really solid concrete and rebar walls. My normal Makita combo hammer drill got through the plaster and then just polished my masonry bits for the first couple of holes. Was not looking forwards to trying to do about 15 more holes. Got this and it was a whole new story. Made holes for red 6mm rawlplugs like a knife through butter. Easy to use, uses same batteries as my other Makita tools, not too heavy. Very pleased.
Reliable but must interchange battery use
he Makita brand always reliable, great to buy through amazon cheaper than high street price.
Reliable but must interchange battery use
he Makita brand always reliable, great to buy through amazon cheaper than high street price.
Breaker breake
Got this SDS for its breaking ability as I had kitchen tiles to get up, worth every penny a real work tool. It does eat battery charge when using as a breaker but it is an incredible tool great addition to the 18v LXT Makita ki
Breaker breake
Got this SDS for its breaking ability as I had kitchen tiles to get up, worth every penny a real work tool. It does eat battery charge when using as a breaker but it is an incredible tool great addition to the 18v LXT Makita ki
Quality at good price
Just to say always been happy with Makita tools thank you
Great drill.
Can not fault this tool. Easy to use, goes through anything. Not too heavy. Feels like it will last like all my other Makita kit.
a must need for a builder or even an enthusiastic Diye
perfect if your on the makita battery system, its does what’s needed and lasts longer. don’t worry about the battery mount feeling loose, its the antivibration which is needed for something like this
a must need for a builder or even an enthusiastic Diye
perfect if your on the makita battery system, its does what’s needed and lasts longer. don’t worry about the battery mount feeling loose, its the antivibration which is needed for something like this
Best hammer drill
Professional hammer drill
Been using this model since it was released well over 10years ago
used day in day out – all day on some jobs
Keeps going and going
Chipper mode to hack off in seconds or chip away at small concrete apertures with ease
love this drill
Best hammer drill
Professional hammer drill
Been using this model since it was released well over 10years ago
used day in day out – all day on some jobs
Keeps going and going
Chipper mode to hack off in seconds or chip away at small concrete apertures with ease
love this drill
Grea
Great quality as you’d expect. My father loved this as a gif
The best by fa
Bought this hammer drill to put wall starters up with, easiest the best tool to use for drilling holes with but hasn’t got the guts or staying power for demolition works
Mi
Top quality easy to use does what it says it does
Much better and more powerful than I expected.
I chose to go makita cordless way back and have since built up my collection. This is the latest addition and I’m very impressed. I had a notion it would lack power compared to a 240v version but far from it. It’s awesome. The makita drill/chisel set to compliment it is fantastic value for money too at 30 and provides more than enough drills and chisels to keep any DIYer happy. Highly recommended.
Bought for so
Bought for sons birthday . He was made up with i
Beas
In a world full of products with 5 star reviews I’ve come to expect to be slightly underwhelmed by products once I receive them and they don’t live up to the hype. This drill fully deserves the plaudits.
We have recently move into a house where everything is made of extremely hard stuff, and my regular hammer action corded drill wasn’t really up to what should have been easy jobs. I chose this model as I already owned the required battery system so it was relatively inexpensive compared some of the other corded or cordless options.
This is the first SDS drill I’ve used so I don’t know if this drill’s performance is typical of SDS drills or if it is in fact a stand-out example of what an SDS drill should be. In any case, it makes extremely light work of drilling masonry and concrete. As an example, even for a modest sized 6mm diameter hole to a depth of 40mm my standard hammer drill would often require the use of slowly increasing bit sizes and was taking many minutes per bit. The Makita is capable of doing to job with a single bit and in less than 30 seconds. The variable speed trigger is excellent and I found the slowest speed perfect for getting each hole started without any of the wander I would typically get from my old drill.
I have a modest 3.0Ah battery which would rarely need charging when it was powering my Makita combi drill. The DHR202Z does appear to consume a lot of power: after around 5 minutes drilling on a fully charged battery the indicated battery level was already down to 75% (the level indicator of the battery is rather crude so it’s difficult to say exactly what the remaining capacity was). If I were planning to use this drill for any more than light DIY, or if this was my first LXT-powered tool, I would definitely be looking to buy one (or more) of the higher capacity batteries available.
as you would expect from makita!
always use makita and have done for a while always top quality and this is no exception, exactly what i would expect from makita tools, very strong and easy to handle and will chew through anything you put up to it very happy purchase
as you would expect from makita!
always use makita and have done for a while always top quality and this is no exception, exactly what i would expect from makita tools, very strong and easy to handle and will chew through anything you put up to it very happy purchase
Confused
So I ordered this drill as me as cheap tool to use when installing small devices or objects into brickwork such as brackets, CCTV , led ights etc.
This drill is perfect for them but I am shocked at how weak it is. I am would not use this drill for anything heavy duty and I currently have it running from a spare 3ah.
Apart from that it is much quicker than my combi in brick
Trade quality sds
Was issued with one ones these for work. Had no issues and drill is capable of doing everything an electrician requires from it so decided to buy one for myself. Decent quality all round.
Fantastic, goes through concrete like a knife through hot butte
For the price, this drill is brilliant. Bought it when my old drill gave up the ghost trying to drill into concrete posts. Ordered this a new seat of SDS bits and the jobs were completed in minutes. Well worth getting the chuck for using your standard drill bits. 5.0 Amp battery provides excellent longevity. Wouldn’t hesitate to recommend this for domestic use on heavy duty
Never used a sds drill before .didnt even realise there was a Pacific drill for masonry work all ways used a regular drill and spent ages attempting to drill a holes in walls to dull the drill bit .this drill goes through a wall like butter .If your some one who need this type of drill to work on wall ECT it’s a no brainer and was was better than the dewalt version i sent back where the spindle wasn’t spinning cylindrical .most my tools are makita and Bosch makita being the best built longer lasting tool .this drill has a light plus a hammer action for use with a chisel I dont think I need but it’s there and may be handy at some point .the drill is very well made like all makita tools very impressed with it .
Never used a sds drill before .didnt even realise there was a Pacific drill for masonry work all ways used a regular drill and spent ages attempting to drill a holes in walls to dull the drill bit .this drill goes through a wall like butter .If your some one who need this type of drill to work on wall ECT it’s a no brainer and was was better than the dewalt version i sent back where the spindle wasn’t spinning cylindrical .most my tools are makita and Bosch makita being the best built longer lasting tool .this drill has a light plus a hammer action for use with a chisel I dont think I need but it’s there and may be handy at some point .the drill is very well made like all makita tools very impressed with it .
solid Drill
good drill, maybe an overkill for DIY and also fairly heavy which is what you can expect with this sort of drill
This won't disappoint. Great value
Purchased this with some hesitation as not having used one before. This has turned out to be one of the best tools I have purchased. I do a lot of DIY and this has made things so much easier. If you are looking for a new SD drill this will not disappoint. I purchased two batteries which are not Makita which have also been very good. I would highly recommend this drill.
Great purchase 👍
Using a 3 or a 4 battery is of no use to use to you really….either a 5 or a 6 is best… especially if you are using for any length of time. Definitely got grunt. But it’s worth if you are breaking through something that isn’t a quick job to use your plug in. I’ve got this drill, also an AVT SDS Makita plug in so either way I’d get whatever job done quickly
I bought this purely for convenience.
ice little hammer drill
ive been drilling 8mm holes all week and it works just fine usual makita quality
Not the lightest, but very sturdy.
Very solid piece of kit, absolute bargain if you already have makita batteries.
Better than DeWalt.
Brilliant bit of kit. Miles better than DeWalt. Hammer function kicks in straight away without pressure.
quality
absolute quality and lightweight. saves al the messing around with cords and will easily do the job of the powered version. I know as I have both.
Impact drill
Very versatile drill, mainly use it when power flushing a heating system but all in all a good all round drill
Makita sds drill
Great tool, I use it for chasing cables etc greet tool but foes get through batterys
I’ve only had this a few days but has had some good use of it so far. I’m a fan of Makita kit and this so far has been great. On some hard brick walks this has been like a hot knife through butter compared to a standard drill. Awesome piece of ki
Lightweight and convenie
Awesome tool drains battery like mad but super convenient to standard 110v or 240v
Quality buy
Supprised by the quality feel and performance for a 18v tool. Packs a supprising punch! Great for chasing out using 4amp hour batteries. Very impressed for little money.
Convenience
Just awesome. I have other 18v makita tools so this was a welcomed addition. Renovating a house and drilling/plugging/screwing has never been so easy!
Brillia
Beats a brick bolster and club hammer at sinking back boxes and chasing walls. Wish I’d bought and SDS year’s ago.
Time saver. Love it.
Great tool. Wish I had it sooner. It saves all the time and agro of getting power cables up a scaffold to drill one hole into masonry. Must have tool.