Steinel Infrared Motion Sensor IS 1 black, 120° Motion Detector, 10 m Range, IP54, max. 500 W or 4 LED Lights [Energy Class A+]
Intelligent Sensor Technology by Steinel
Live comfortably and save energy at the same time. Are you searching for a starter model? The infrared sensor IS 1 combines perfectly developed technology and classic design. It is very reliable, can be installed on the wall and the ceiling and is the perfect solution for the targeted surveillance of surfaces in front of houses and driveways.
Wall and Ceiling Mounting
Our Company
Steinel develops and manufactures sensor lights in its own factories in Europe. Made in Europe is our winning formula – and has been for over 50 years. Our products are renowned around the world for their easy handling and their longevity. Convince yourself!
IS 1
Targeted Surveillance at a Low Price
The setting options: The optical system, which swivels through 30° and tilts through 180°, allows for a precise adjustment of the detection zone. Additionally, the detection zone can be limited with the included lens covers.
The time setting and the twilight threshold are easily adjustable via rotary controls on the bottom of the sensor.
The corner wall mount is available as an accessory. The supply line can be surface or flush-mounted.
Twilight Setting 2-2000 lux
When the light level drops below the set brightness level the sensor is activated.
Time Setting 8 sec.-35 min.
Adjustable time period in which the light stays on after a movement is detected.
Reach 10 m
Max. reach in which movement is registered when moving across the detection zone.
IP54 Protected
Protection against damaging dust ingress as well as splashwater from all directions.
Intelligent Infrared Technology
| | | | |
|---|---|---|---|
Adjustable Motion SensorThe zone of detection can be adapted to the specific local conditions by adjusting the lens, which swivells through 60° and tilts through 180°. Additionally, the angle of detection can be limited with the included lens covers. | The Pyro SensorThis electric module reacts as soon as the infrared thermal radiation within the detection zone changes. This causes a voltage jump which is then converted into an electronic impulse, which switches the light on or off. | Heat RadiationDue to their body heat humans emit infrared radiation. Infrared sensor technology uses this radiation to detect movement and to react accordingly. | ReachThe reach of infrared sensors depends on the direction of movement. With tangential movements (parallel to the sensor) the reach is about 12 m on average, which is shortened when moving directly towards the sensor (radial movement). To attain the maximum reach the optimal mounting height of 2 m should be given. |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Passive infrared sensor | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Point of use | In – and outdoor | In – and outdoor | In – and outdoor | In – and outdoor | In – and outdoor | In – and outdoor |
| Mounting | Wall, corner | Wall | Wall | Wall, corner | Wall, corner | Ceiling |
| Angle of detection | 180° with 90° angle of aperture | 140° | 130° | 120° | 240° with 180° angle of aperture | 360° with 180° angle of aperture |
| Swivelling range | – | 180° | 50° | 60° | 160° | Fine adjustment |
| Tilting range | – | 90° | 90° | 160° | – | – |
| Reach | max. 12 m or 5 m | max. 14 m | max. 12 m | max. 10 m | max. 12 m | max. 12 m |
| Twilight threshold | 2 – 2.000 lx | 2 – 2.000 lx | 2 – 2.000 lx | 2 – 2.000 lx | 2 – 2.000 lx | 2 – 2.000 lx |
| Time setting | 10 sec. – 15 min. | 8 sec. – 35 min. | 8 sec. – 35 min. | 8 sec. – 35 min. | 10 sec. – 15 min. | 8 sec. – 35 min. |
| Max. output | 1000 W | 1000 W | 600 W | 500 W | 1000 W | 1000 W |
| Weight: | 100 g |
| Dimensions: | 50 x 50 x 50 cm; 100 Grams |
| Brand: | STEiNEL |
| Model: | 600419 |
| Part: | 4007841600419 |
| Colour: | Black |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Steinel |
| Colour: | Black |
| Quantity: | 1 |
Very easy to install and detection area good. Would recommend this unit.
Easy to install and switches on with the slightest moveme
Ordered postage free from Amazon market place seller The Electrical Showroom. Received, fitted and working perfectly within 24 hours. Simple to fit and install with comprehensive instructions, has fittings for rear or surface cable entry.
Rope quality sensor, works perfectly with our outside lights, so good I purchased another for the garden.
works well once i figured out the wiring instructions not too clea
Easy to fit as a replacement for a malfunctioning one.
Easy to install & to adjust, I have used two of these , one to control 6 LED spotlights & the other controlling 9 of them [total wattage approx 18w & 27w].
Better than anticipated! Precision is good enough! Lot of thoughts put up in Default setting ! I did not change the default setting and still it’s working as expected! Very user friendly! Installed by myself with no hiccups whatsoever! I would recommend!
Item as described first one faulted after 3 days but replaced within 2 days & no problem since
Professional product, works a charm – detects motion over a wide area, fiddly to wire if your cables are side entry though like mine were.
Difficult to wire up due to its design. Would have been far more convenient if it was pre-wired ready to be connected to existing wiring. The motion sensor is quite slow, but otherwise, ok.
A satisfactory product. I have installed it within an open porch and so cannot comment on the waterproof aspect.
Good product does the job well and easy to install
I was looking for an external standalone PIR covering the approach to my house porch that controlled LED warm white spot lights GU types. This product is great, easy to fit, works with LED spot lights unlike some other PIR lights. It also allows wiring to an indoor separate light switch operated from my hall.
Fantastic PIR worth the little extra cos
Best motion detector by far. Operates perfectly with no false activations from nearby trees and bushes.
Very sensitive but easy to adjust so it starts the light when needed
Annoying white wall spacers which you have to paint black with an indelible black marker as the sensor is black otherwise it looks stupid.
The sensor is very good but Steinel need to sort out a better cable entry because currently it’s rubbish.
Certainly better than most other sensors on the market.
Bought because a quality brand, clear instruction to install and set up, expensive, but cheap ones will not work for long. Does not pick up motion at the distance stated though, hence only 4* otherwise would be 5*. Going to remount to see if it makes a difference.