Universal TV Stand/Base Tabletop TV Stand with Wall Mount for 40 to 86 inch 5 Level Height Adjustable, Heavy Duty Tempered Glass Base, Holds up to 66kgs Screens, HT03B-003P
| Dimensions: | 75.2 x 37.2 x 8.4 cm; 9.38 Kilograms |
| Manufacture: | Heartmao |
| Dimensions: | 75.2 x 37.2 x 8.4 cm; 9.38 Kilograms |
| Origin: | China |
| Reference: | HT03B-003P |
Product fulfills what it promises, great resistance and easy assembly, I only had one problem, the screws that come with the product were not useful for my TV, I had to get them separately, otherwise everything was perfect.
Product fulfills what it promises, great resistance and easy assembly, I only had one problem, the screws that come with the product were not useful for my TV, I had to get them separately, otherwise everything was perfect.
Gut, aber da ist noch Luft nach oben....
Positiv: Das Teil macht, was es soll. Und es ist stabiler, als im Vorfeld befrchtet.
Negativ: Die Anleitung geht so, da ist Luft nach oben (Einstellung der richtigen (!) Hhe u.a.) Auerdem scheint die Fixierung nach dem Aufhngen ein wenig fadenscheinig, die seitliche Ausrichtung ist damit anfllig. Aber es hlt erstmal. Und last but not least: Manches am TV lsst sich eben nicht mehr oder nur sehr schlecht verwenden, wenn die Kiste erstmal hngt: Scart- Stecker, externe Festplatte…
Fazit: nicht schlecht, aber… da ist noch Luft nach oben!
It's a nice stand. Needed a stand so I could raise the height of my old 32inch bedroom tv. The tv's original stand or shall I say feet leave the tv low which makes it barely visible when I'm in bed.
It’s a nice stand. Needed a stand so I could raise the height of my old 32inch bedroom tv. The tv’s original stand or shall I say feet leave the tv low which makes it barely visible when I’m in bed.
Pretty good overall. Keeps a 60 inch tv standing despite my toddler slapping it over and over again. Pivot angle is a bit narrow but I always want N+1 pivot angle.
Pretty good overall. Keeps a 60 inch tv standing despite my toddler slapping it over and over again. Pivot angle is a bit narrow but I always want N+1 pivot angle.
I Like the base. Heavy and glass I believe. Shiny black Looks nice. I was not sure what height I should pick out of the 4 choices. Some guidance in the literature would have been welcomed. It was easy to put together. I like it. The price was decent.
I Like the base. Heavy and glass I believe. Shiny black Looks nice. I was not sure what height I should pick out of the 4 choices. Some guidance in the literature would have been welcomed. It was easy to put together. I like it. The price was decent.
Looks hard to assemble but actually straigh forward about 15 minutes total (i am an old ikea ninja however). Mounted an older 32” vizio so its heavier than modern panels. No issues just need to find combo of washers bolts and spacers in the generous hardware pack to match rails to your tvs mounting holes. I should have opted for something that swivels for my application but that not the fault of this sturdy little stand.
Looks hard to assemble but actually straigh forward about 15 minutes total (i am an old ikea ninja however). Mounted an older 32″ vizio so its heavier than modern panels. No issues just need to find combo of washers bolts and spacers in the generous hardware pack to match rails to your tvs mounting holes. I should have opted for something that swivels for my application but that not the fault of this sturdy little stand.
Perfetto
staffa universale incredibilmente robusta, esteticamente perfetta ha cambiato l’aspetto del mio porta tv (LG da 50′)
Meglio di tante marche famose
Robusto e facile da montare a prezzo competitivo molto meglio di marche famose
It is exactly the same as other reviews. It is a very stable TV stand, and easy to assemble.
It is exactly the same as other reviews. It is a very stable TV stand, and easy to assemble.
Sehr einfach zu montieren!
Gute Qualitt, einfach zu montieren. Nur leider finde ich die niedrigste Einstellung leider immer noch etwas zu hoch!
Better than the LG one
Bought this as the LG one was leant backwards and apparently this is intentional and this makes it a much better viewing angle for my 86″ TV.
Es simplemente perfecto
Para los que no nos gusta empotrar pantallas en la pared, este soporte es genial, fabuloso, de excelente calidad, si tu pantalla es ms grande que el mueble donde piensas ponerlo es perfecto, las instrucciones son perfectas, te llevan paso a paso y trae sus propias herramientas, es simplemente genial, 100% recomendable…!!!
Great price point and good instructions for assembly. This unit is very sturdy and looks great. Minimalist appearance.
Great price point and good instructions for assembly. This unit is very sturdy and looks great. Minimalist appearance.
Ottimo
Ottimo prodotto…avevo bisogno di un supporto che mi alzasse la TV dato che era troppo bassa messa sul mobile….mi sembra molto robusto e il vetro nero sulla base fa una bella figura
Bueno por el precio
El envo fue rpido y el artculo estaba bien embalado. Por el precio, cumple el propsito. Buenas instrucciones de montaje y fcil de montar. Mi televisor es de 65″, es pesado y el soporte cumple su funcin de soportar el peso y ocultar los cables. Incluso logr sujetar la box de TV detrs del panel.
TV table mount stand
Excellent service and delivered as promised .The stand is of and excellent quality and really looks good. The only issue i had was that the bolts larger bolts securing the brackets to the TV were too long and had to buy replacements. Overall an excellent product .I am very happy with my purchase
.
.
Didn't want to put holes in wall or damage the mantle with a extension. Found this and love it. It was easy to assemble, great for the price and it's very sturdy. I love it. Also my tv is 65 inches
Didn’t want to put holes in wall or damage the mantle with a extension. Found this and love it. It was easy to assemble, great for the price and it’s very sturdy. I love it. Also my tv is 65 inches
It was very easy to assemble and a good value for your money.
It was very easy to assemble and a good value for your money.
Fits a 58" TV 😃
The overall quality of the stand is pretty good, everything was included in the box including various length and thickness of screws and spacers to match most TVs. The instructions are in English but not very well translated, some of the steps took a bit of guesswork but overall it was assembled in about 10 minutes.
We’ve got a 58″ Panasonic LCD TV mounted on the stand, I’m not entirely confident that it wouldn’t topple over if pushed but so far it seems to be okay. The stand is height adjustable (fixed with screws so the screen needs removing to adjust the height) and it can slightly tilt too (that could be my bad workmanship though) and has velcro tags to tidy cables up though they’d probably only support a power cable and maybe one HDMI cable without a bit of DIY. Overall for the price I was fairly impressed, I’m tempted to get another for a smaller TV which we had wall mounted and threw the original stand away.
Depending on the size of your TV you may need two people to mount the TV on the stand.
Als Fuß für Samsung The Frame 32'' geeigne
Habe diesen Standfu gekauft, damit der TV hher kommt als mit den kleinen Fchen die standardmig im Lieferumfang sind. Doch dann musste ich feststellen, dass der Frame gar keine VESA Montagelcher hat. Die 4 Montagelcher die er an der Rckseite hat sind nur fr die Fe oder Wandmontage mit dem mitgelieferten Kit. Die Abstnde zwischen den Lchern betragen horizontal 54cm und vertikal 27,8cm. Dank der Langlcher, die die Montageschienen bei diesem Standfu haben, konnt ich sie aber trotzdem an den vorhandenen Montagelchern des The Frame montieren. Auch super, dass hier alle Schrauben fr verschiedene Fernseher- bzw. Vesa-Typen dabei sind und bersichtlich beschriftet. Habe in meinem Fall die kurzen M4 Schrauben plus Unterlegscheiben verwendet.
Die Bilder zeigen den 32” The Frame auf dem Stnder in der hchsten Position. Ist durch das hohe Gewicht des Fues auch ordentlich stabil, aber der 32” Frame wiegt ja auch nix.
Bin voll zufrieden mit diesem Standfu. Er kam ordentlich verpackt und in sehr kleine Teile zerlegt an. Das zusammenbauen war mit der Anleitung vllig problemlos. Alle Schrauben sind einzeln verpackt und eindeutig beschriftet, sodass man nicht suchen muss, sondern sofort wei welche Schraube fr den jeweiligen Schritt die richtige ist. Super!
perfect stand for me..
item itself is very good. as described.. complete mounting hardware. my only complain is the 3rd party shipping company driver it keep me waiting till 9pm.he has the item from 9am to 9pm… i even went direct to yamato EC brand office to see if i can collect by myselt..
recommended stand…but not the delivery guy!!
works well. does exactly what i expected it to do, however I am a bit worried that it's not as sturdy/strong as it could be. the base plate is made of ceramic/glass and there is a heavy moment/torque on the base from the weight of the tv. so, i will be tying the tv back to the wall to make sure it does not fall.
works well. does exactly what i expected it to do, however I am a bit worried that it’s not as sturdy/strong as it could be. the base plate is made of ceramic/glass and there is a heavy moment/torque on the base from the weight of the tv. so, i will be tying the tv back to the wall to make sure it does not fall.
Au top
Parfait pour une tl 86 pouces de 50kgs que je n’osais pas fixer au mur a bouge pas et a supporte trs bien le poids.
Easy to understand the assembly instructions. The cable organizing straps on the back post are nice to have to hide all the cables. Very sturdy and thick tempered glass base. I'm using it for a 55 inch Vizio 4K tv that is only about 31lbs and a Roku Streambar Pro mounted below it that is just over 5lbs, so I'm no where near the maximum weight limit, but it definitely feels sturdy enough to hold almost triple that for sure. If you want to raise the height of the TV, but don't want to put holes in your wall, this base is a great option to go with.
Easy to understand the assembly instructions. The cable organizing straps on the back post are nice to have to hide all the cables. Very sturdy and thick tempered glass base. I’m using it for a 55 inch Vizio 4K tv that is only about 31lbs and a Roku Streambar Pro mounted below it that is just over 5lbs, so I’m no where near the maximum weight limit, but it definitely feels sturdy enough to hold almost triple that for sure. If you want to raise the height of the TV, but don’t want to put holes in your wall, this base is a great option to go with.
Appeared to be easy to assemble but it was missing the main portion of the base so we had to send it back.
Appeared to be easy to assemble but it was missing the main portion of the base so we had to send it back.
Top - alles bestens und steht super sicher!
Habe den Stnder mit einem 86″ 45 Kg Fernseher bestckt. Hat sehr gut funktioniert. Konnte sogar die niedrigste Hhenstufe verwenden, das hat perfekt gepasst. Sieht Edel aus und ist nach der Endmontage auch super stabil.
Lost the base for my 65” when moving houses. This is perfect. Sturdy. Good price.
Lost the base for my 65″ when moving houses. This is perfect. Sturdy. Good price.
Sturdy
Easy to put up and really sturdy
Holds telly very well
Hochwertig und stabil
Ich habe mir diesen Standfu gekauft, damit ich einen 17 cm hohen Centerlautsprecher unter meinen 55 Zoll Fernseher stellen kann. Der Standfu sieht sehr hochwertig aus und ist sehr stabil. Htte auch noch zwei Stufen nach oben frei, wenn es mal ein grerer TV wird. Absolute Kaufempfehlung!
Pied central de qualit, trs robuste, finition noir mat soigne. Mont sur une TV Sony Bravia de 65″ (23Kg) (cran de 1454x835mm), il n’y a eu aucun problme de compatibilit.
La hauteur entre le dessus du meuble et le bas de l’cran est rglable, mais cette distance peut galement tre diffrente par rapport la hauteur de vos 4 points d’ancrages de la norme visa sur votre TV. Cette option n’tant pas dtaille sur la description du pied, on ne peut pas savoir exactement la distance minimum possible entre le dessus de votre meuble et le bas de la tlvision avant l’achat.
A titre indicatif, je vous donne le rsultat de la hauteur minimum possible entre le dessus du meuble et l’cran, en considrant que les trous de la norme visa de votre TV sont situs 14cm partir du bord bas de cette TV, comme cela est mon cas, l’espace entre meuble et TV est de 20cm. Si les trous visa de votre TV sont situs plus haut que 14cm, vous pourrez rduire encore cette distance de 20cm, pour exemple, pour des trous visa situs 18cm du bord bas de la TV, l’espace entre le dessus du meuble et le bord bas de la TV sera de 16cm. En rsum, plus vos trous visa sur votre TV seront loigns du bord, plus vous pourrez diminuer la distance entre le meuble et la TV.
Le plateau en verre est trs pais ce qui donne une certaine confiance pour la stabilit du pied, sa finition est irrprochable.
Ce pied est fourni avec une multitude de vis, ce qui permettra chacun de trouver son bonheur pour fixer le pied derrire l’cran, sur certains crans, comme le mien, les vis d’origine fournies par Sony taient compatibles.
Il est galement fourni avec une petite cl Allen de 5mm et un mini cl plate de 14 mm. Je vous conseille fortement de vous procurer une vraie cl plate de 14 mm car celle incluse est un vritable gadget, et il faudra bien serrer vos crous.
Justement, en ce qui concerne le serrage, on commence par le pied en verre fix au montant principal par 3 boulons, il faut s’assurer de leur trs bon serrage, c’est capital.
En ce qui concerne le cadre horizontal supportant la TV, sa fixation se fait par 4 boulons qui passent travers le tube ovale en mtal pais, signaler ce sujet que les caches noirs fixs aux crous s’en vont lors du serrage, de toute faon, ils sont inutiles, seulement esthtiques, mais thoriquement derrire la TV on voit rien. Pour ma part, pour le serrage de ces 4 boulons sur la colonne, j’ai rajout 4 rondelles solides du ct crou afin d’obtenir un meilleur serrage ce qui n’tait pas vraiment le cas avant l’ajout de ces rondelles.
Une fois tout mont et la TV pose sur le support, rien ne bouge, la TV est bien droite verticalement, ce qui n’est pas toujours le cas avec les pieds d’origine, surtout pour des grands formats de TV, par contre sur le plan horizontal, il faut bien vrifier le niveau car celui-ci bouge trs lgrement malgr les 4 boulons bien serrs sur la colonne, il suffit de prendre un mtre et de contrler la distance entre le dessus du meuble et le bas de la TV de chaque ct ou un niveau bulle, ensuite on descend ou relve lgrement un ct de la TV sans touch au pied, et je dirais fort heureusement que l’on peut trs lgrement modifier le niveau sans toucher au rglage du pied pour quelques millimtres, c’est peut-tre l’option manquante sur ce pied de qualit, le rglage fin et fixe du niveau une fois la TV pose sur le support.
Prvoir des longueurs de cbles consquentes si les connections TV sont sur les bords, car ceux ci doivent tre cachs par la colonne centrale pour une parfaite esthtique.
Pour rsumer, cet article est de bonne qualit, sans mauvaise surprise, je pense qu’il est bien adapt pour les grands crans de TV au moins jusqu’au 75″, sans souci.
TV Bench for Sony 55" X80J
Just finished setting up the new TV on my new TV stand after making several height adjustments to get it just right. Assembly was straightforward. However, I spent more time getting the height right than actually putting the table top stand together.
I bought this table top stand because I wanted to raise the TV high enough to allow me to slip the sound bar underneath the TV without blocking the bottom part of the screen. The legs that were included with the TV were just too short. The mount fit my Sony 55″ X80J TV perfectly.
A few things that prevented me from giving it 5 stars include:
a) Rubber feet – The adhesive was old and upon removing the rubber feet from the backing, the adhesive separated making one of the feet useless. I had to buy another full set of replacement rubber feet. Fortunately, Amazon also sells these with one-day delivery so I wasn’t delayed too much with the rest of the assembly.
b) M6x30 screws (Metric) – The supplied screws were too short and the supplied washers were Imperial size (not metric) so the diameter was too small to fit the metric screws. I had to go to Home Depot to get longer M6x40 screws, M6 washers, and M6 lock nuts (lock nuts were not included).
Other than these two issues, the TV table mount stand works as designed and is a nice edition to my home theatre setup.
Genial y fuerte
Es sper bueno necesita un poco de tiempo y atencin en el manual para armarlo ya que no es fcil pero la inversin de tiempo y dinero valen la pena
Good and sturdy
This unit was perfect for my 55″ LGTV I moved from my living room wall into my bedroom. I long lost the stands for it since it was mounted on the wall.
I ordered and tried several units and they just didn’t seem very strong. This unit is easy to assemble. I like that on the back it has built in Velcro wire holders. In the picture to the left side of the back there is a screw that is circled. There is one on each side. This holds the stand to the TV which makes it easy to move and put on a table if you are setting up the TV by itself. Nothing worse than trying to manipulate the TV to get the hooks to meet up to the stand if you are doing it by yourself. This takes care of that issue. It was slightly out of level but adjusting right to left with a slight move will get it level. Also there is a height adjustment in the back if you want to put things underneath the TV like a clock or an android box. Love this unit.
Perfecto
Le faltan algunos accesorios para determinados TV, lo he solucionado con un trozo de goma de bombona de butano.
Es resistente y muy bonito. El TV, en mi caso un Samsung de 43″, ha quedado fenomenal.
Sturdy and strong
Great workmanship and very strong and sturdy. Well worth the money and make my TV look grea
We have a 65" LG and it probably weights 40-45 lbs. The vertical slats that mount to the back of the TV are very thin, but work well. It would be a nice feature to have incremental horizontal adjustments, but to get the horizon of the TV properly level you twist up or down on the TV until you are close. When you find that sweet spot, it stays in place. The vertical riser is sturdy, and the base is glass and sturdy. Two screws hold the vertical to the base and they run the same orientation as the TV, so I'm interested to see of the stresses of all of the weight continuously leaning forward on those two holes has any negative effect on the glass? The vertical riser does shore out around the frame of the riser, so it should be OK.
We have a 65″ LG and it probably weights 40-45 lbs. The vertical slats that mount to the back of the TV are very thin, but work well. It would be a nice feature to have incremental horizontal adjustments, but to get the horizon of the TV properly level you twist up or down on the TV until you are close. When you find that sweet spot, it stays in place. The vertical riser is sturdy, and the base is glass and sturdy. Two screws hold the vertical to the base and they run the same orientation as the TV, so I’m interested to see of the stresses of all of the weight continuously leaning forward on those two holes has any negative effect on the glass? The vertical riser does shore out around the frame of the riser, so it should be OK.
Great value, not exactly most sturdy, but does the teick
Mounted a 60ish inch tv onto it.
Didn’t use screws provided for the actual part that connects to the back of the TV.
Great for the price, but it does wobble when the TV is pushed (like when cleaning).
Most anxious first week, but after not hearing a crash, we love it!
Has survived one 3.4 earthquake, so can’t fault that.
Took 2.5 people to put together, especially with hoisting TV and making sure it’s aligned. (.5 because I am an idiot and mainly useless)
Perfect fir 82 inch
Perfect – 5 mins to setup , stands about 30 cm off the floor at max height – balanced and secure . Superb value for money A*
Brilliant *****
Great seller, very happy with item as it is as described, super fast shipping.. Would definitely recommend *****
Sopra le aspettative
Il supporto facile da montare e robusto. La base anche bella da vedere in quanto in nero lucido (pensavo fosse la solita plasticaccia).
Ho avuto problemi con gli attacchi dei cavi. Infatti il rettangolo del supporto non mi permetteva di collegare il cavo HDMI e l’antenna tv. Il problema stato facilmente risolvibile utilizzando i distanziatori presenti nella scatola.
Sicuramente un ottimo prodotto robusto e bello da vedere e permette di “alzare” il tv dal mobile senza fare buchi nel muro.
Works As Described. Seriously easy to put together, and came with a bunch of extra hardware to accommodate various TV sizes. Adding safety straps (not included) is a common sense addon with a TV this large and they help with the general stability. I have a Panasonic tc54ps14 and used VESA bolt pattern 500x300.
Works As Described. Seriously easy to put together, and came with a bunch of extra hardware to accommodate various TV sizes. Adding safety straps (not included) is a common sense addon with a TV this large and they help with the general stability. I have a Panasonic tc54ps14 and used VESA bolt pattern 500×300.
Great value
Great stand and clear instructions with all parts clearly labelled. Very happy
Put it together in less than 20 minutes. No tools required. Very sturdy. I could not put 50 inch TV on my dresser or night stand. Initially it was too wide but now the base holding it is perfect for sitting TV on small surface. It went from having a 46 inch wide surface to 14 inch wide surface. I can now put TV on just about anything including the floor.
Put it together in less than 20 minutes. No tools required. Very sturdy. I could not put 50 inch TV on my dresser or night stand. Initially it was too wide but now the base holding it is perfect for sitting TV on small surface. It went from having a 46 inch wide surface to 14 inch wide surface. I can now put TV on just about anything including the floor.
Good produc
My expectation was different, I thought I could turn up the TV more
Holds Weight of 65 inch very well.
Very sturdy Tv Stand, has all bolts and washers require for 55 inch below.
However didn’t have long enough bolts when install 65 inch. End up purchasing longer bolts
If you hate having to wall mount your Tv this is very good Tv Stand.
This is a good quality TV stand, very sturdy with good hardware. The tempered glass base is a nice touch. There is a lot of adjustment build in to the stand, allowing the TV to be mounted at various heights. I installed it on a 65″ TCL. The only negative point that I found is that, with my TV’s mounting bolt pattern, at the lowest position, the TV’s bottom edge is still 7″ above the counter-top. I was hoping to have the TV closer to the counter. But, it still worked out fine because we ended up positioning the sound bar below and behind the TV. Another factor to consider is that there is no vertical tilt mechanism built into the stand and bracket. So, if you are positioning the TV up high, you will not be able to use the bracket to tilt the screen down for a better viewing angle. Still, a good 5-Star product!
Buon supporto per tv
Fa il suo dovere se siete interessati a collocare la tv su un mobile o tavolino. Molto robusto e stabile, facile da montare in pochi minuti.
Non do 5 stelle in quanto per i tv 55″ l’altezza del braccio minima, quindi tenete a mente che posizionare la base a terra o su un supporto troppo basso non garantir risultati ottimali
It's a decent stand. I'm not unhappy with the purchase. It's pretty solid and heavy and easily handles my 48" Sony Bravia. About the only quibble I had was one of the TV mounting screws was bad but I had some extras on hand so I used it and it worked fine. All in all, it's compact and sturdy and looks nice.
It’s a decent stand. I’m not unhappy with the purchase. It’s pretty solid and heavy and easily handles my 48″ Sony Bravia. About the only quibble I had was one of the TV mounting screws was bad but I had some extras on hand so I used it and it worked fine. All in all, it’s compact and sturdy and looks nice.
Standbus verg sho
Does not stand very high. Advertised as a wall hanging but it does not.
Much better than original tv stand
It’s sad that I had to do this, but the TCL 6 Series built-in stand is an issue for most. The placement of them are at the outer edge of the TV instead of further in like most TVs. I knew this going in so I had already chosen this product as a solution before I bought the TV.
Unfortunately, the TV stand arrived with missing pieces. It arrived on the Saturday before the Super Bowl so it seemed that I cut this too close and didn’t allow enough time for screw-ups like this. I went through the online replacement process which was super easy and the replacement arrived the next day (SUNDAY) before the game started! Wow. I don’t know how any traditional retailer can compete with that.
As far as the product goes, I was actually impressed with how much better the TV looks with this stand vs. the original manufacturers stand. Kinda weird to say that but it just does.
Only slight con is specific to my TV (TCL 6 Series). The back of my tv is slightly curved and so the stand holds it at a slight tilted back angle. No big deal, but you’ll notice it if you are looking at it directly from the side view which you never really need to.
The price for this unit is extremely reasonable. Similar units are over $100.00 at local retain dealers. Relatively simple to assemble. I think needs two people and my wife was able to help and we got it done in maybe 15-20 minutes. Only thing I did not like just a little bit is the stability of the system that is on the stand and the TV attaches to once the bars are installed on the TV. It certainly is not going anywhere, but if the TV is touched the TV can shift downward or upward ever so slightly so that it appears uneven. Certainly not a normal occurrence but I did notice that. Tightening up the screws with a large screwdriver instead of the small tool helped somewhat. Otherwise all if good. Recommended.
The price for this unit is extremely reasonable. Similar units are over $100.00 at local retain dealers. Relatively simple to assemble. I think needs two people and my wife was able to help and we got it done in maybe 15-20 minutes. Only thing I did not like just a little bit is the stability of the system that is on the stand and the TV attaches to once the bars are installed on the TV. It certainly is not going anywhere, but if the TV is touched the TV can shift downward or upward ever so slightly so that it appears uneven. Certainly not a normal occurrence but I did notice that. Tightening up the screws with a large screwdriver instead of the small tool helped somewhat. Otherwise all if good. Recommended.
SO EASY, great for my 50”
Only came to review this because unlike the reviews I read prior to purchase, this was super simple to put together! I’ve been dreading the assembly, so it sat under my tv stand for a month. It took me 30 minutes form start to finish, while working my at-home job, and I’m a scrawny 27 year old woman. There aren’t many words in the directions, but really, they aren’t needed. The illustrations are great and all the pieces came very well labeled. I used the tools provided without issue, and without need of any additional tools. Seriously was SO EASY.
It’s holding up my 50″ just fine!
Il prodotto eccellente, soprattutto dal punto di vista della robustezza e stabilit. Anche il montaggio non presenta problemi, ed presente una ricca dotazione di viti e distanziatori che dovrebbero coprire qualsiasi “sorpresa” in fase di adattamento sul TV. Ho dato 4 stelle e non 5 per via della staffa posteriore, quella specie di rettangolo orizzontale che si vede nella foto. Nel modello da me acquistato, ha le dimensioni di 46 cm di larghezza per 18 di altezza. Il problema che questa staffa, indispensabile per agganciarci le due barre verticali (da fissare sul TV), possono andare a coprire alcuni degli ingressi posteriori del TV. Nel mio caso (io ho un LG 32″), non avrei potuto sfruttare almeno la met degli ingressi, perch il lato superiore del rettangolo gli capitava proprio davanti. Io ho risolto brutalmente segando un lato del rettangolo. Ci stato possibile proprio perch la solidit del supporto tale che asportando parte di quel rettangolo non si mette in pericolo la funzionalit dell’oggetto. Suggerisco comunque di guardare bene la fotografia, e verificare se quel rettangolo va a interferire su qualche componente del TV. Servizio Amazon eccellente, come al solito.
After reading the one star reviews, I was skeptical how well this stand would work with my 65″ Panasonic television, but based on the price I decided to give it a shot. The instructions to put the base together were very clear, and more importantly the base was very sturdy holding up, what I thought would be, too large a television. I am very happy we purchased the stand and would tell anyone who is hesitant based on its ability to support a 65″ tv that it far out performed my expectations.
Bei 40 Zoll Fernseher eingeschränkte Höhenverstellung
Das Produkt macht qualitativ einen sehr guten Eindruck. Die abgerundete Form der Glasplatte (warum abgerundet?) ist Geschmackssache und kann leicht bersehen werden. Von einer Kabeldurchfhrung zu sprechen ist sehr optimistisch. Auf der Rckseite des Stehers sind zwei Klettbnder fr die Kabelfhrung angebracht.
1. Der Aufbau ist gut beschrieben (bildlich) und nur mit sehr wenig englischem Text versehen. Das ist jedenfalls als Mangel zu werten, da Produkte fr den deutschen Sprachraum eine deutsche Anleitung haben mssen. Ein derartiger Mangel berechtigt zur Wandlung. Der Aufbau ist mir nicht schwer gefallen, da die Teile gut beschriftet und die Bilder zu verstehen sind.
2. Die Stabilitt ist gut, wenn man nach dem Aufbau die Schrauben noch ein Mal ordentlich fest zieht.
3. Die Hhenverstellung ist bei einem 40 Zoll Gert dadurch eingeschrnkt, dass die am TV angebrachten Halterungen oben oder unten hervorstehen (weil die Hhe des TV diese nicht mehr abdecken kann). Ich kaufe noch einen zweiten Standfu fr ein 32 Zoll Gert. Da wird es dann notwendig sein, die Halterungen zu krzen, damit ich die Hhenverstellung voll ausntzen kann, ohne dass die Schiene der Halterung sichtbar wird.
4. Wegen der englischen Aufbauanleitung und der eingeschrnkten Verstellbarkeit bzw. der Notwendigkeit die Halterungen zu krzen, ziehe ich, unter Bercksichtigung des vernnftigen Preises, nur einen * ab. Mein Urteil lautet daher ****. Ich kann das Produkt allen empfehlen, die mit den beschriebenen Einschrnkungen kein Problem haben.
It was not hard to assemble I have a 65 inch sharp and it fits well( 400 mm vesa) the tv is fitted into a cubby in our great room does not seem liable to tip. For 36 dollars seems like a quality piece. I did have to ream out one of the screw holes with a round sander as some extra material from construction remained. It was not a deal breaker. I would recommend this
It was not hard to assemble I have a 65 inch sharp and it fits well( 400 mm vesa) the tv is fitted into a cubby in our great room does not seem liable to tip. For 36 dollars seems like a quality piece. I did have to ream out one of the screw holes with a round sander as some extra material from construction remained. It was not a deal breaker. I would recommend this
Used this with Samsung 65 inch curved TV. At the Maximum setting, the tv touches the base. Got the open box tv that didn't come with a stand. TV has thin bezels. TVs with larger bezels will not fit. Doesn't tip over, but the tv is inclined slightly upwards, This does not affect viewing in anyway. You cannot place anything in front of the TV like soundbar as the TV is not elevated. I had to purchase longer bolts. This could be because of the curved back. Overall, it works, looks ok from front and for the price, I couldn't find better.
Used this with Samsung 65 inch curved TV. At the Maximum setting, the tv touches the base. Got the open box tv that didn’t come with a stand. TV has thin bezels. TVs with larger bezels will not fit. Doesn’t tip over, but the tv is inclined slightly upwards, This does not affect viewing in anyway. You cannot place anything in front of the TV like soundbar as the TV is not elevated. I had to purchase longer bolts. This could be because of the curved back. Overall, it works, looks ok from front and for the price, I couldn’t find better.
Robusto, adattabile e affidabile
Ho acquistato il supporto per poter inserire un televisore 40′ in uno spazio ben preciso in un mobile e i piedini in dotazione consentivano di sollevare l’apparecchio solo ad un’altezza di pochi centimetri. Il supporto veramente ottimo per robustezza e solidit. Le molte viti e dadi gli consentono di sopportare il carico di TV abbastanza pesanti in completa sicurezza. Basta solo prendere qualche misura e avere un cacciavite a disposizione per montarlo in pochi minuti.
I’m new to big TV’s. 32″ is the biggest I’ve ever had, flatscreen or CRT. I’ve been content to watch on my laptop or iPad and occasionally movies on a now-considered small, flat screen in the bedroom, as I’m not into action movies, sports or other videos that need a big screen. However, my eyesight has become poorer, and didn’t like the way the TV had to be on a huge table stand ruining the look of the room so it could be closer to the bed. I have a cabinet across the room, but the width is only 35″. The feet that come with all lower-priced 50″ or more TV’s I could find wouldn’t fit within its edges. There was no room to hang it on the wall, and I certainly wasn’t interested in paying someone $100 or more to install it, which would also mean paying someone to move it if I wanted to change its location. I could, however, get a 55″ TV delivered free in two days. No set up, but they’d bring it into the house. The TV stand I have that couldn’t be used now was about $279 7 years ago. I found this very reasonable pedestal that could be used for TV’s up to 65″. That sounded really safe, since mine is 55″. The TV only weighs 30 lb. When I opened the box I was intimidated because it comes with all the screws and bolts to fit almost any size and brand on the market. My TV had four screw holes on the back that were 16″ apart. The rails (16″apart) interfere with only the RCA connectors, which I don’t need. I would suggest checking the specs and layout of your TV ports carefully to be sure whatever you need is available. In my case, I only need coax and 2 HDMI ports. Ethernet would be nice, but I have a dumb TV for a reason. Sorry but I don’t want Amazon or Google listening to me in my bedroom. I use a TiVo with a great remote and user interface and an Apple TV mostly for streaming from my phone, but in any case, I don’t feel concerned about privacy, except of course that Comcast, my TV and internet provider, can track every program I watch and every website I visit. I put it together on the dining room table where there’s plenty of room to lay out all the parts and excellent lighting. I estimated the height, more based on my perception of a safe balance to avoid having the thing fall over. I used the middle height, which works out fine. The base is made of glass. Kind of odd, but easy to keep dust-free. There are peel-and-stick rubber feet that are about large and thick enough for stability and not to mar a surface. There’s enough space between the bottom of the TV frame and the cabinet top that I can put my Apple TV and TiVo, and they are both easily accessible with IR signal. TiVo makes it a somewhat smart TV ( I can get Netflix, Amazon Prime, YouTube, Hulu, etc. but without the awfulness of television interfaces, and I NEVER have to deal with Comcast’s interface. TiVo remote will choose inputs, and has a full keyboard. I use the TV’s remote only for sleep timer, and sooner or later to tweak the basic settings. Default is okay for now.
But I digress. This stand is the subject. I’ve had it set up a little over 2 weeks. It hasn’t fallen over. Seems very sturdy and balanced. I needed another person to lift and hang the TV onto the stand. It hangs on shark-fin hooks. Very simple and can be easily moved. Two people are needed for this last task unless one has extremely wide arm-span. Two normal women were able to set it up in a few moments after assembling the stand, which did take some time as we had never done it before. I gave her the extra bolts, which she will recycle. I am very happy with this. Why most televisions come with clunky, huge feet, I can only guess is to fulfill the requirements but save a lot of money. I feel I saved money by buying this stand instead of a wall mount. It also adds so much flexibility. I recommend this product. I’m not taking off for the RCA ports being unaccessible because I blame that on the TV design.
The legs on my new tv cracked so I needed to find a replacement. This tv stand is grreat. It is set up like a wall mount, but sits on a tv stand. It is sturdy, I was able to assemble it and put my 60″ on without help. The center support is great. Most new tvs have the legs very far apart which usually requires getting a new stand for them. This allows me to use my stand, raise the tv to the height I want, and looks so much better than the original legs. I was very pleased with this purchase.
I purchased this stand because my new LG 55′ TV’s factory stands were on the far edges of the TV frame, and didn’t fit on my existing furniture. I was also very surprised at how flimsy the factory stands were. This stand is very stable. You can tell how rock-solid it is simply by taking it out of the box. Took about 15 minutes to put together the base portion, and another 15 or so to find the right position to mount the rails on the TV.
There are a ton of different spacers and screws to fit almost any TV. Only potential issue is that I could’ve used an M6x24 screw and the only included screws were M6x35 and M6x12. Would have been nice to have something in between. I was able to make it work regardless, but if not, it’s something that a 10 minute trip to the hardware store could’ve fixed.
This piece looks great too. Very sleek yet basic, so it should look good on almost any furniture. This was the perfect choice.
I ordered a new 65″ television, not thinking about where the legs were located. When it was delivered, the legs were on each side and were too far apart to set on the piece of furniture where it was to be located. I found this stand on Amazon and it was delivered yesterday. It was assembled in less than 30 minutes with very easy-to-follow instructions – even including several sizes of screws to assure the brackets that attached to the TV were the right size and length. It was a breeze hanging and securing the TV to the stand. The stand is heavy (not flimsy like some), has a sturdy base, and holds the TV quite security. I was able to adjust the height of the TV by several inches, so my soundbar didn’t block the bottom of the picture. I am thrilled that I found this solution! I would highly recommend this stand!
Replaced a older 65in samsung Led tv with new 65. this stand AND other stands similar say will work with 65’s Nope. half an inch too short with newer samsung models. Needs longer verticle shaft. Bottom of the tv hits the glass base. So i extended it and only used two of the four holes. i now have maybe and ince of space under the tv to the base. It works.. but im no so sure i want to keep it with less than the four bolts it was designed with.. maaaaybe it is fine, after-all the tqo bolts keeping the “slide-fit” extension are 1/4in and i doubt the tv has the qeight to sheer them off.. still if a person was putting it together they’d be like ahh crp!.. so it works… but not designed as described.
Also. samsung owners.. you will need 40mm long, by 8mm width screws to hold the brackets to the back of the tv.. kit comes with 35mm long.. and are too short. So get some proor to ordering or email the seller.. 67cents each at Lowes and you need four. other than these things fast shipper, is wjat it describes except not really for 65’s.
Sehr zufrieden!
Dieses produkt kann ich sehr empfehlen. Es war einfach aufzubauen und es sieht sehr gut aus! Wenn man es nicht wsste, wrde man denken das es zu dem Fernseher orginal dazu gehrt!
My TV cabinet stand is for a much smaller TV. It was not designed for a 55" TV. I began looking for a solution and found it with this pedestal stand. There were a few issues with some of the hardware - Some screw holes not lining up right. I worked my way through it. This stand is universal and made to fit a wide variety of TV brands. Over all, it is solid and much sturdier than the plastic legs that came with my new TV.
My TV cabinet stand is for a much smaller TV. It was not designed for a 55″ TV. I began looking for a solution and found it with this pedestal stand. There were a few issues with some of the hardware – Some screw holes not lining up right. I worked my way through it. This stand is universal and made to fit a wide variety of TV brands. Over all, it is solid and much sturdier than the plastic legs that came with my new TV.