DEWALT Metal Shears Attachment, Impact Ready (DWASHRIR)




Weight: 721 g
Dimensions: 14.94 x 6.99 x 29.85 cm; 721.21 Grams
Model: DWASHRIR
Colour: Black /Yellow
Manufacture: Dewalt
Colour: Black /Yellow

You may also like...

130 Responses

  1. Anonymous says:

     Canada

    Without ever having seen one work I took a chance and bought it. It is a real timesaver and cuts a tight circle happy with the purchase would buy agai

  2. tjohnson says:

     Canada

    eeds a bigger hole to start the cut, so make sure you have a wider step drill

  3. OliverColburn says:

     United Kingdom

    This has been great for taking the edge of metal stud and track.
    It isn’t likely to replace the nibbler for the bigger jobs, but it’s coped more than adequately on the few little tasks it’s done so far.
    Great addition to my kit.

  4. GlindaClendinne says:

     United Kingdom

    This has been great for taking the edge of metal stud and track.
    It isn’t likely to replace the nibbler for the bigger jobs, but it’s coped more than adequately on the few little tasks it’s done so far.
    Great addition to my kit.

  5. RafaelaKaczmare says:

     United Kingdom

    This has been great for taking the edge of metal stud and track.
    It isn’t likely to replace the nibbler for the bigger jobs, but it’s coped more than adequately on the few little tasks it’s done so far.
    Great addition to my kit.

  6. JosephiRounds says:

     Canada

    I bought these sheets for a metal roofing project. First use took a little practice but they performed quite well. They cut fairly straight with practice. But I noticed my impact driver get very hot on just 16″ pass. Like much hotter than it does if I’m driving screws all day long

  7. JeraldGilroy says:

     Canada

    I bought these sheets for a metal roofing project. First use took a little practice but they performed quite well. They cut fairly straight with practice. But I noticed my impact driver get very hot on just 16″ pass. Like much hotter than it does if I’m driving screws all day long

  8. InezOGrady says:

     Canada

    This tool is another great addition to my tools arsenal. Tool itself is quite small and light. How heavy or cumbersome it gets depends on the drill you attach it to. I installed it on my Bosch Drill-Driver as it is lighter and smaller than the Dewalt’s I currently own. The tool itself cuts material like butter. So smooth that it takes a little practice to stay on the lines. Beats all hand tin shears hands down.

  9. MarylynCasas says:

     Canada

    This tool is another great addition to my tools arsenal. Tool itself is quite small and light. How heavy or cumbersome it gets depends on the drill you attach it to. I installed it on my Bosch Drill-Driver as it is lighter and smaller than the Dewalt’s I currently own. The tool itself cuts material like butter. So smooth that it takes a little practice to stay on the lines. Beats all hand tin shears hands down.

  10. uucpmwfqeb says:

     Canada

    This tool is another great addition to my tools arsenal. Tool itself is quite small and light. How heavy or cumbersome it gets depends on the drill you attach it to. I installed it on my Bosch Drill-Driver as it is lighter and smaller than the Dewalt’s I currently own. The tool itself cuts material like butter. So smooth that it takes a little practice to stay on the lines. Beats all hand tin shears hands down.

  11. Anonymous says:

     Canada

    I was unsure to buy this product because I use the Milwaukee M12 impact but it fits just fine on the square 4.0 amp battery pack

     I was unsure to buy this product because I use the Milwaukee M12 impact but it fits just fine on the square 4.0 amp battery pack

  12. Anonymous says:

     Canada

    I was unsure to buy this product because I use the Milwaukee M12 impact but it fits just fine on the square 4.0 amp battery pack

     I was unsure to buy this product because I use the Milwaukee M12 impact but it fits just fine on the square 4.0 amp battery pack

  13. considerthesauce says:

     Canada

    This attachment worked really well on our impact driver. It made cutting vinyl siding very simple. I recommend it for cuts that are straight as it didn’t work well for notched areas on the siding. We also tried it on tin with great success. Overall very impressed with the functionality.

  14. Anonymous says:

     Canada

    This attachment worked really well on our impact driver. It made cutting vinyl siding very simple. I recommend it for cuts that are straight as it didn’t work well for notched areas on the siding. We also tried it on tin with great success. Overall very impressed with the functionality.

  15. Anonymous says:

     Canada

    This attachment worked really well on our impact driver. It made cutting vinyl siding very simple. I recommend it for cuts that are straight as it didn’t work well for notched areas on the siding. We also tried it on tin with great success. Overall very impressed with the functionality.

  16. PrestonDeBernal says:

     Canada

    Make a couple of test cuts in a piece of scrap before using it on your good material. Start off slowly and guide it slowly through the material, it’s easy to get ahead of yourself. It will cut very quickly if you let it. I was using it to cut metal roofing panels and I had to be careful cutting through the ridges, sometimes cutting the ridges with a set of aviation snips. Overall very happy with my purchase.

  17. PercyMcEachern says:

     Canada

    Make a couple of test cuts in a piece of scrap before using it on your good material. Start off slowly and guide it slowly through the material, it’s easy to get ahead of yourself. It will cut very quickly if you let it. I was using it to cut metal roofing panels and I had to be careful cutting through the ridges, sometimes cutting the ridges with a set of aviation snips. Overall very happy with my purchase.

  18. Pauline5420 says:

     Canada

    I was hesitant on buying this item but glad I did, just cut 14 20″x11″ holes in 24″ spiral no problem, goes through the seam as well. Probably not the best for it but it does.
    Seems weak the way it mounts but it’s fine.
    A good product to have in the carry all when you don’t want sparks or a loud tool.

    Best used with a drill not a impact. The impact just impacts constantly.

    Used on a makita 18v drill.

  19. Rev. Kim Justice says:

     Canada

    I was hesitant on buying this item but glad I did, just cut 14 20″x11″ holes in 24″ spiral no problem, goes through the seam as well. Probably not the best for it but it does.
    Seems weak the way it mounts but it’s fine.
    A good product to have in the carry all when you don’t want sparks or a loud tool.

    Best used with a drill not a impact. The impact just impacts constantly.

    Used on a makita 18v drill.

  20. Anonymous says:

     Canada

    I love this tool I have an older Dewalt impact as well as many new ones but I use the old one for these Metal shears great idea. I haven’t used it that much don’t know how long it will last but I love what I see so far for the money.

  21. JocelynLapointe says:

     Canada

    I love this tool I have an older Dewalt impact as well as many new ones but I use the old one for these Metal shears great idea. I haven’t used it that much don’t know how long it will last but I love what I see so far for the money.

  22. Adam Learoyd says:

     Canada

    I love this tool I have an older Dewalt impact as well as many new ones but I use the old one for these Metal shears great idea. I haven’t used it that much don’t know how long it will last but I love what I see so far for the money.

  23. Anonymous says:

     Canada

    I love these shears, they do all the work for you. I’ve used these for two years now at work and now have bought my own set.
    I would recommend to family or a friend

  24. Anonymous says:

     Canada

    I love these shears, they do all the work for you. I’ve used these for two years now at work and now have bought my own set.
    I would recommend to family or a friend

  25. Anonymous says:

     United Kingdom

    Used on aluminium roofing sheets with great success attached to another makes drill

  26. Anonymous says:

     United Kingdom

    Used on aluminium roofing sheets with great success attached to another makes drill

  27. LynetteRowan says:

     United Kingdom

    Very handy easy to fit best used with a impact driver very easy to see what your cutting and straigh

  28. Anonymous says:

     United Kingdom

    Very handy easy to fit best used with a impact driver very easy to see what your cutting and straigh

  29. Anonymous says:

     United Kingdom

    Dewalt tools in my opinion are the toughest out there and this one is a prime example, I have dropped this lots of times of roofs and scaffold and still works as good as new, the only problem I have is if you are trying to cut box profile roofing sheets it’s very tricky you can do it but it’s best cutting flat steel, worth every penny and very easy to use.

  30. Anonymous says:

     United Kingdom

    Dewalt tools in my opinion are the toughest out there and this one is a prime example, I have dropped this lots of times of roofs and scaffold and still works as good as new, the only problem I have is if you are trying to cut box profile roofing sheets it’s very tricky you can do it but it’s best cutting flat steel, worth every penny and very easy to use.

Leave a Reply

Your email address will not be published.