Heat Gun, SEEKONE Professional 2000W 50℃- 600℃ Variable Temperature Control Hot Air Gun Kit with 2 Temperature Modes 7 Accessories for DIY, Shrinking PVC, Stripping Paint and Home Improveme


Specification
Strong Power | 2000W |
Input | 220V, 50Hz |
Dual Temperature Setting( â ) | 50 â – 400 â |
Dual Airflow Setting( Low ) | 190L-210L/min |
Clockwise | Heat |
Size | 248mm*192mm (9.76″*7.56″) |
Weight | 0.9 kg (1.984 lb) |
Dual Temperature Setting( â ¡ ) | 400 â – 600 â |
Dual Airflow Setting( High ) | 250L-500L/min |
Counter-clockwise | Cooling |



Automotive Film
It’s an practical garage tool that every mechanic should have in their tool box. It will give you the edge for carrying out tasks such as tinting car windows or wrapping your cars interior.
Shrinking PVC
Our heat guns are simple to use and have the power to efficiently shrink wrap products at the speed you need. With excellent air velocity settings, it quickly shrinks PVC in just a few seconds.
Removing Rusted Bolts
Heat the nut with a heat gun if it won’t come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.
Weight: | 1.07 kg |
Dimensions: | 24.79 x 18.34 x 3.81 cm; 1.07 Kilograms |
Part: | SDL-2816 |
Colour: | Yellow Heat Gun |
Pack Quantity: | 1 |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | SEEKONE |
Colour: | Yellow Heat Gun |
Dimensions: | 24.79 x 18.34 x 3.81 cm; 1.07 Kilograms |
Quantity: | 1 |
Reference: | SDL-2816 |
This item arrived well packaged and with the various nozzles and scrapers in a bag inside the box. The nozzles are made from fairly thin metal but they are only designed to deflect the heat so no need for anything heavier.
The device has a large, variable temperature control in the opposite end from the heat output and combined with the two speed air flow switch, I was pleasantly surprised to find how much control it provides the user.
There is a little metal stand that folds down to allow the device to stand with the heat output going upwards, hands free. This is a good idea but the stand is very narrow and I wouldn’t trust that the gun wouldn’t fall over. I would probably stick it into a vice or some kind of clamp rather than use the stand.
All in all, I’m very pleased with this purchase.
This item arrived well packaged and with the various nozzles and scrapers in a bag inside the box. The nozzles are made from fairly thin metal but they are only designed to deflect the heat so no need for anything heavier.
The device has a large, variable temperature control in the opposite end from the heat output and combined with the two speed air flow switch, I was pleasantly surprised to find how much control it provides the user.
There is a little metal stand that folds down to allow the device to stand with the heat output going upwards, hands free. This is a good idea but the stand is very narrow and I wouldn’t trust that the gun wouldn’t fall over. I would probably stick it into a vice or some kind of clamp rather than use the stand.
All in all, I’m very pleased with this purchase.
Purchased to remove paint from doors, but will be useful for a variety of other projects.
Looking forward to trying this heat gun on epoxy resin.
This 2000w heat gun heats up real quick with a dial to adjust the temperature. I think this will be really useful, i.e, epoxy, having control of the heat.
The convenient switch on the handle, up or down, allows a lower or higher speed flow. An excellent lightweight and comfortable gu
Purchased to remove paint from doors, but will be useful for a variety of other projects.
Looking forward to trying this heat gun on epoxy resin.
This 2000w heat gun heats up real quick with a dial to adjust the temperature. I think this will be really useful, i.e, epoxy, having control of the heat.
The convenient switch on the handle, up or down, allows a lower or higher speed flow. An excellent lightweight and comfortable gu