1. Check Voltage Please find the spec label of your device and check the working voltage. It should be 12V DC, not be AC 12V or lower/higher than 12V DC. Otherwise, your device will not work or be damaged. | 2. Check Current Check the max current your device will draw. It should be equal to or less than 3A,such as 0.5A, 1A,1.5A,2A,2.5A,3A. Otherwise, your device won’t work well and the power supply will be damaged very soon. | 3. Check Port Check the power input port of your device. Its outer diameter should be 5.5mm; inner core diameter should be 2.5mm or 2.1mm. Inner core polarity should be”+”, exterior polarity should be” – “. | 4. Refer to original PS If you have an original power supply for reference, their output voltage, plug size, polarity should be the same .If our PS’s current is equal to or higher than original one’s, then our PS will work with your device. |
5.0 out of 5 stars BY THE POWER OF SHNIT!!!
great adapter. works well. would be 4/5 but bumped up a star due to the brand name. great conversation piece.
well made
great power adapter if you need one buy this its really good
SHNITPWR has a very good price to quality ratio!
I have two SHNITPWR adapters and both work great. This one is quite slim for a 36W power supply and works as advertised. My only nitpick is that power cord is quite short. Works for my application, but some people might need an extension.
Good Product. Works Well & 2.5mm socke
I needed a PSU with quite a high current rating, but not too large for an LED camera light. It was also critical that it had a 2.5mm socket not the usual 2.1mm found on most ‘bricks’. This fitted the bill in all respects. I have had it running my LED light drawing 1.8 amps for over an hour. Not only does it cope well it doesn’t get very warm either.
5.0 out of 5 stars Done the job of powering a universal Kensington docking statio
Done the job of powering a universal Kensington docking statio
5.0 out of 5 stars does what it says
does what it says .. used to power a bank of 3 x LED lights, 12v, 2.6W each
Upgrade for outside LED Lighting
Needed a larger rated power supply to run 10 outside LED lights, as original was rated to run only 6, and caused blinking when the original supply was over heating post calculations and finding the correct rating, this was more suited, and works a treat. Nice price, well packaged and quick delivery.
5.0 out of 5 stars Fitted everything I owned.
Decent device powers my Asus Mesh Nodes, whose power packs which got lost in a house move.
Nice and compact. Works perfectly with my router.
Just the ticket.
I checked the connector was suitable for my router and it connects well -a secure fit.
Way better than using a multi-adapter with all the fiddly interchangeable connectors and voltage selector.
Worked for me. Nice compact unit. Doesn’t get hot/buzz or any other negative effect.
4.0 out of 5 stars will it do the job.
I still dont like the thin plastic cable that breaks after a while!
A good replacement for the original cable.
Nothing to dislike particularly. We are unable to assess whether or not it will last as long as the original adapter which has lasted more than 5 years.
Worked a trea
Needed a new power supply for a medical ECG machine as the one supplied with the unit had failed. I’m sure the company supplying the machine would have charged an arm and a leg for a replacement, so I picked this one and it worked straight out of the box and for a very reasonable price too.
It’s versatile with a selection of plugs for various equipment and I bought another ‘just in case’, so I can cover any eventuality. Just make sure that the 12V that this supplies is suitable for the replacement that you need otherwise you could end up destroying your equipment.
5.0 out of 5 stars Has what you need
Has the connectors I’ve needed so far – including the screw-in one for wired supplies
5.0 out of 5 stars What’s not to like 👍
Does exactly what’s expected. And the choice of power tips is great when you’re not 100% sure which one you need. Those tips are interchangeable with other power supplies too
It does it's job well.
This is a good quality item that does the job as it should.
Small, light and powerful.
Nice and small, works like a charm for powering some LED strip I installed at home.
Great value too.
All good
The power supply is working fine. And the adaptor too.
I recently installed a satellite dish and Satview box for my elderly parents, worked great until 2 days later mum hoovered behind the tv unit snatching the power lead from the Satbox and entangled it round the hoover, shredding all the wires from the power connector, somehow the story got twisted and it all became my dads fought, (If you’re married you know exactly what I mean!). Trying to buy a replacement was a nightmare, the supplier of the Satbox did not sell them unless you brought the whole unit, and we not paying another 125. Looked at a replacement on Amazon, it looked the correct size and spec but did not fit as it had a very small pin in the center of the connector, this we returned, then I saw the advert for this version with multiple interchangeable tips, we ordered and it came the next day, very fast. With so many different tips it was easy to find the correct one, plug it in and the Satbox powered up straight away. Money well spent, very happy parents + this time I cable tied the trailing leads off the floor. Looking around we checked what else the spare tips could be used with, this included a security camera for the front window, a battery charger, and an old handheld electronic game from my childhood that eats batteries, and a decorative side table lamp. With so many choices of tips, it looks like there is a solution for any of your power needs.
Works well
Bought as a replacement for a SAD light whose charger lead had broken. Good description of the tips included lead me to this item and it was cheaper than buying a replacement light. I now have a working light and a lot of spare tips for future use if needed
Good power supply
Robust power supply that I’m using on a bird scarer around my sheds. It’s operating in -3c at the minute and no problems. Jack plug is a good fit and I don’t anticipate any problems.