Skyreat Mini 3 Pro Screen Protector, Screen Protector 9H Hardness Anti-Scratch Tempered Glass for DJI Mini 3 Pro Accessories DJI RC Controller Accessories- 2 Pack
| Dimensions: | 18 x 10 x 1 cm; 100 Grams |
| Model: | Mini 3 Pro RC(5.5inch) |
| Manufacture: | SKYREAT |
| Origin: | China |
Con questa pellicola si riesce a vedere bene eanche se si sta la sole.
Worth the money for peace of mind. Had to reposition the protector a couple of times but work the air bubbles from the centre (if any) and it’s good to go
Molto semplice il montaggio, protegge lo schermo del Dji RC controller e mantiene i comandi touch screen. CONSIGLIATO
Ob iPhone, iPad oder eben jetzt die DJI Fernbedienung: Schutzfolien sind nicht unbezahlbar und haben bei mir schon so manchen Schaden abgewendet. Diese Folie war schnell und einfach zu applizieren und passt exakt.
Mit der Schutzfolie kann ich nun die Fernsteuerung einfach in einem Rucksack oder eine Tasche transportieren, ohne dass ich riskiere, dass der Screen zerkratzt wird. Funktioniert sehr gut. Wenn einmal angebracht, merkt man nicht, dass die Folie drauf ist. Super Produkt.
Fits perfect, good visibility so all fine. I recommend it.
Si tratta di un vetrino protettivo all’apparenza di buona qualit (non ho testato la resistenza ancora, per fortuna), facile applicazione e senza bolle, la dimensione perfetta per lo schermo del DJI Smart venduto insieme al Mavic Mini 3 Pro (NON ha le stesse dimensioni dello Smart Controller Dai, quello nero).
Nella confezione sono presenti due vetrini ed i soliti kit di installazione composti da panni vari ed adesivi togli polvere.
Ritengo quasi necessario proteggere lo schermo del controller visto che se accidentalmente subisse un danno, non si pu utilizzare con lo smartphone, quindi meglio spendere qualche per evitare danni maggiori (e riparazioni sicuramente pi costose).
Passt perfekt auf den Monitor der Fernbedienung und Gute Quali
Molto utile, per non rischiare di rigare il display del comando DJI Mini 3.
Pellicola perfetta per proteggere lo schermo del dji RC del Mavic mini 3 pro. Credo vada bene anche per lo schermo del dji RC pro visto che la diagonale dello schermo la stessa.
Prodotto arrivato in confezione classica per schermi vetro temperato. Di misura esatta al millimetro allo schermo del radiocomando.
Una volta effettuato il fissaggio come da istruzioni, il risultato ottimo come se non fosse presente.
Nel complesso molto soddisfatto.
Good product, peace of mind to protect your RC screen. Easy enough to apply, well happy.
Ltt att applicera. Innehller tv skydd samt rengringsdukar fr montering. Rekommenderas varmt fr att skydda skrmen.
S’adapte parfaitement l’cran de la DJI RC, facile a poser, pas de bulle d’ai
Die Folie ist sehr gut und lsst sich Blasenfrei anbringen. Die passt haargenau drauf. Kann ich nur empfehlen.
Die Folie passt perfekt auf das Display.
Wird regelrecht angesaugt beim Auflegen.
Wenn man nach der beiliegenden Anleitung arbeitet und keine 2 linken Hnde hat bekommt man sie sehr einfach blasenfrei auf das Display.
Macht einen guten Eindruck und schtzt das Display des Controllers vor Kratzern.
Mir ist mein Schlsselbund drauf gefallen… nicht ein Kratzer, …. bin sehr zufrieden.
Die Folie lies sich sehr einfach aufbringen! Habe sie auf das Display gelegt und man konnte sehr schn zusehen wie die Luftblasen verschwunden und sich die Schutzfolie an das Display geklebt hat. Desweitern ist sie wirklich perfekt passgenau, was von mir extra plus Punkte gibt.
Lohnt sich wirklich zu kaufen!
Very good product, it have any tools that you need for a proper mou
Offers great protection from scratches for the DJI RC screen, fitting perfectly. Easy to apply.
To protect my investments, I have applied a screen protector to all of my smart phones and tablets.
Upon receiving my new Mini 3 Pro RC, it was a given that i would want protect it’s excellent display.
A little time on Amazon turned up this Skyreat screen protector, and somewhat influenced by the good reviews, I hit the button..
And I am not disappointed in my choice.
The kit arrived with all of the common items supplied with a screen protector (Alcohol wipe, soft cloth, dust removal stickers and alignment stickers) that made or an easy application.
The protector itself is very accurately cut and covers the display ‘edge-to-edge’.
The protector has not in any way tainted the responsiveness of the touch-screen and feels as smooth to use as that of the native glass.
The protector appears to have a slight ‘Matte finish’ to it, which will reduce glare in bright conditions.
The bottom line is; it’s a screen protector much like any other. But, it is well made and well presented and good value for the price.
Normalerweise schreibe ich keine Rezessionen, aber da ich hier die negativen Bewertungen nicht verstehen kann, gibt’s von mir ein paar Worte. Das Glas passt sowas von perfekt und deckt alles genau ab – TOP. Diejenigen die schon Probleme mit dem Anbringen des Panzerglases haben, sollten das Drohen Fliegen aus Sicherheitsgrnden bleiben lassen. Bin froh, einmal nicht auf die negative Bewertungen gehrt zu haben.
Just peeled off the protective film and watched it suck itself to the screen, brillia
It is EXACTLY the same size as the Mini 3 Pro RC screen so a bit fiddly to get it lined up, but once you do it’s a perfect fit. I got a small bubble on one corner but it’s out of the image area so no bother.
Der Displayschutzglas lsst sich sehr leicht aufbringen. Das Glas ist sehr gleitfhig und beeintrchtigt nicht die Touchfunktionalitt. Der Lieferumfang beinhaltet 2 x H9 Displayschutzglser mit jeweiligen Feucht- und Trockentcher.
Skyreat kindly supplied this screen protector for me.
As a commercial drone pilot, good quality products are particularly important.
I received the item promptly and was pleased to see the glass screen protectors (there are two in the pack) had arrived safely. The package was sturdy.
The protectors came with two packs of cleaning cloths and lens wipes which I used. The instructions were poorly translated unfortunately but using past experience to apply glass protectors was helpful. The two self adhesive hinge tabs are invaluable to permit accurate placement onto the screen…see picture.
With everything cleaned the protector fell accurately into place and the air pockets dispersed quickly.
Once in place, there is no apparent lip as it sits within the screen recess. It hasn’t affected the touchscreen operation.
It’s good to know the screen now has some protection…and would definitely buy again if required.
Bought this to protect the main screen on my new DJI Mini3 Pro RC unit. It is a perfect fit so should protect it well. If you have ever used something similar to protect your mobile phone screen, it s fitted in exactly the same way.
You firstly clean the RC screen with the included alcohol wipe to remove any greasy finger marks etc, then dry/clean with the mini cloth and use the dust grabber to remove any stray particles. To fit the screen protector you use the 2 guide stickers on what will be the front of the screen protector and then peel the backing film off the rear of the protector. You then place the new protector carefully over the existing screen, making sure you are lined up correctly and then press down so it adheres to the screen.
If you get any bubbles as I did at first, just try and direct them towards one of the edges of the screen and they should disappear. I did have to push down quite hard to get rid of one of the bubbles but it eventually went OK and looking at the screen you can’t even tell a protector is in place.
The touch screen on the Remote Controller works absolutely fine and I’ve not had any issues so far.
I normally don’t use screen protectors on my smart phones as I don’t like any imperfections on the screen or anything that detracts from the design of the phone. However, with the DJI RC I had read reports that the screen was liable to scratches so I decided to get a screen protector, and after looking at other reviews, this seemed to be the one to go for – and I do not regret the decision.
It came extremely well packaged, and comes with everything you need to first clean your screen: a wet wipe with cleaning solution, and a microfibre cleaning cloth. After the 2 mins it took to give the screen a clean, there were no marks or fingerprints, so it was ready to install the actual screen protector itself.
After removing the protector glass from its packaging, I slowly lowered it onto the screen, lining it up following the guidance that is also in the packaging. Easy.
Once installed, you literally cannot tell that the protector layer is on the screen (which you can see from the photos). The touch controls still all work perfectly, there isn’t the slightest hint of an air bubble – it looks literally perfect.
As a bonus, you actually get 2 screen protectors in the pack, so I already have a backup in case this one does get scratched. Would certainly recommend, and I may even use a screen protector on my smart phone as I’ve been converted!
Ich hatte erst den Fehler gemacht eine entspiegelte Folie bei einem anderen Anbieter zu kaufen, bei dieser Sorte gibt es dann aber Regenbogeneffekte ohne Ende (und damit absolut grottige Displayqualitt).
Hier sieht das Display nun wieder super aus, und es passt perfekt. Eine kleine Blase war drin, die dann mit etwas Mhe rausging.
Leider war bei der Lieferung eine der beiden schon vollstndig zerstrt. Packung war auch beschdigt. Hier sehe ich die Schuld aber eher bei DHL.
Bit on the expensive side but, fits screen perfect with zero gaps, super quick to install and no bubbles at all.
Well worth the money to protect the RC.
Fitted perfectly, can’t tell there is one on top of the original screen. Two in the pack so have a spare for another time.
Ottimo prodotto che si applica perfettamente allo screen del nuovo DJI RC. Nessun problema di installazione. Nella confezione 2 screen protector e tutti gli strumenti per fare l’operazioen correta di incollaggio. Istruzioni nella scatola. Se devo trovare un difetto manca la spatolina per rimuovere eventuali bolle, ma puoi usare la confezione stessa o una carta di credito. Consigliato.
Der wirklich hochwertige Displayschutz lsst sich komplett blasenfrei anbringen, allerdings passt er wirklich SEHR genau und geht bis in die grauen Display-Gehuse-Ecken des Controllers (siehe Fotos), was bedeutet, dass man sehr genau ansetzen muss und nur sehr wenig Spielraum beim Ansetzen hat.
Ragt das Glas in einer Ecke zu stark in den Bereich des grauen Controllergehuses, legt sich das Glas an der Ecke nicht auf das Display. Ich habe 2 Anlufe beim Ansetzen gebraucht, aber es ging und war letzten Endes kein Problem – der 2te Displayschutz konnte in seiner Verpackung bleiben, vor allem dank des folgenden TRICKs:
Bei mir hat sich schon bei vielen Displays der “Bad-Trick” bewhrt: Man lsst 2-3 Minuten bei geschlossenem Fenster und geschlossener Tre im Bad die heie Dusche laufen, dadurch wird praktisch smtlicher, in der Luft umherfliegender Staub eliminiert und man hat freie Bahn.
Hinweis: Um kein Wasser zu verschwenden, sollte man die Aktion einfach im Anschluss an das eigene Duschen durchfhren ;-).
Leider ist die Anleitung in gebrochenem Englisch auf der Klapp-Innenseite der Verpackung etwas verwirrend, aber es gibt auf YouTube ein paar Anleitungen zu “Displayschutz Tempered Glass”. Die Anleitung auf der Plastik-Verpackung der Installationsutensilien ist etwas besser, aber sollte meiner Meinung nach trotzdem detaillierter und leichter verstndlich sein.
Wenn man dann das Ding korrekt angesetzt hat, zieht sich der Displayschutz wie von Geisterhand von selbst fest, der “schwarze Bereich” luft dann von alleine ber die ganze Flche – nur an einer Ecke musste ich mit sanften Druck etwas nachhelfen – toll!
Meine Befrchtung, dass die Touchfunktion durch das Glas beeintrchtigt sein knnte, hat sich erfreulicherweise nicht besttigt. Lediglich an den Rndern muss man gefhlt ein ganz kleines bisschen fester Touchen. hnliches habe ich aber auch bei allen anderen Folien und Glsern bei anderen Gerten festgestellt. Nach ein paar Minuten passt sich der Fingerdruck an die neuen Gegebenheiten an und man bemerkt das praktisch gar nicht mehr.
1 Stern Abzug gibt es fr die verwirrende englische Anleitung – die sollte bei diesem Preis deutlicher und detaillierter sein (siehe Fotos).
Auerdem wre das Anbringen eventuell ein bisschen leichter, wenn die Gre des Glases nur ein, zwei Hundertstel mm kleiner wre, aber das ist Jammern auf hohem Niveau – dafr ist danach wirklich jeder Quadratmikrometer Flche geschtzt und es fngt sich vielleicht weniger Schmutz in den Ecken bzw. an den Rndern.
Fits perfectly on a corners little in perfect but that’s possibly my own mistake, recommend
These are fantastic for the Mini 3 Pro RC controller. Nice snug fit so the screen will not become scratched. No loss of screen sensitivity at all. Perfect for what is intended.
There’s a few of these on Amazon, so wasn’t sure which to go for. However I’m very happy with this purchase so looks like I picked the right one
Decent screen protector for my DJI Mini 3 Pro RC! Perfect fit and comes with all you need to put it on. Sadly I messed up and some bubbles but have now disappeared which is good. It’s quite thick so hope it will offer the protection I need to save the screen.
I have used this type of protection for my phones and tablets for some time but this one just wouldn’t seem to work.
I followed the instructions and the first one had a number of little bubble that I couldn’t remove. I put this down to bad luck, but, as with the other reviewers I had to use the second screen (the spare one). This time the screen had fewer bubbles but sadly much bigger ones. Again I couldn’t remove them all. Maybe I had a faulty set.
I must have, I tried again with another set and it worked a treat. Job done and looks very impressive.
Took multiple attempts to get this adequate but prevailed in the end, should protect my screen for many flights in the future, support from seller was first class.
Good quality Dji RC screen protector, perfect fit,very thin, pretty much invisible! Very easy to mount, and you get 2 pieces! Received next day. Buy with confidence
There were no reviews for this as all mini 3 stuff is really new – so bought on a bit of a punt – but it’s a perfect fit for the DJI Mini 3 Pro RC.
The kit comes with 2 protectors on the off-chance you make a mistake
– or I guess if it falls off (only time will tell but it seemed to stick nicely!).
There are also 2 lots of “auxiliary tools” – basically wet wipe, soft cloth and stickers.
There’s no instructions for the guide stickers, but they’re really not necessary as the screen is recessed and the protector fits nicely into the recess.
I found it easier to apply with the power off (black screen)
Just dropped the protector onto the screen gently.
As the protector adhered to the screen you could see clearly as it attached with like a darker “wet bubble” behind it which slowly grew and a bit of gentle pushing removed a small remaining air bubble making it really easy to see it was attached with no bubbles or dust.
Overall, the fit is so good you wouldn’t even know a screen protector has been added on, but I’d feel happy to put a cable or something in the bag next to it, knowing that it’s not going to scratch the screen.