T70gsi 8.5kW [Energy Class A]
Why choose an Electric Shower?
Simplicity
Heats cold water instantly to provide a refreshing shower
Convenience
A hot water shower available on demand, 24 hours a day
Economical
Only heats the water used during showering
Easy to install
Just requires a mains cold water feed and an electrical connection
Parts and Labour
All of our Electric showers are covered for 2 years parts and labour for domestic use
Why choose a Triton shower?
| | | |
|---|---|---|
Made in BritainTriton has been at the heart of the nation’s bathrooms for 40 years. Our name stands for one of the best of British designs, engineering and service. We’re proud to be the UK’s leading shower brand, trusted by the trade and homeowners alike. | Ease to InstallAll Triton models are expertly engineered and rigorously tested 50,000 times to ensure the highest levels of quality and performance. Our showers are also designed with ease of installation for quick, hassle-free fitting. | Trusted Triton ServiceOnce you have bought a Triton product it doesn’t stop there. Our service team of 100 fully trained telephone advisors and engineers aim to provide you with help and support throughout its lifetime, to offer additional peace of mind. |
One Minute Overview- Improve your shower knowledge
| | | |
|---|---|---|
Electric ShowersElectric Showers require cold water only which is heated instantly to provide a hot shower. – An electric shower only heats the water you use once the shower is switched on. It does not use the hot water heated or stored by the household water system – An electric shower is always ready to use 24 hours a day seven days a week -The higher the kilowatt power rating (kW) the better performance and greater the flow of heated water | Mixer ShowersMixer showers require hot and cold water which is ‘mixed’ together to provide a hot shower. – Mixer showers use the hot water heated by the household water system – Generally produce higher flow rates compared to electric showers – Mixer showers must be matched to your household water system. High pressure systems such as combi boilers, are ideal for mixer showers -Add a pump on a low pressure systems to to boost water flow rates | Power ShowersPower showers require hot and cold water which is ‘mixed’ together and the built in pump increases water flow, to provide a hot shower. -Power showers are made for use on low pressure systems only. An internal pump increases the flow of water to provide a powerful shower – Power showers are not to be confused with electric showers as they do not heat water -Generally produce higher flow rates than electric showers and many mixer showers |
Gravity fed hot water system
This system has a cold water tank in the loft or in the top of the airing cupboard and a hot water cylinder below it. The water in the cylinder is heated by a boiler or an electric immersion heater and fed to taps via a pipe from the top of the cylinder. As the hot water in the cylinder is used up, it is replaced with cold water from the tank above, which in turn is refilled from the mains water supply via a float operated valve. System water pressure is usually low. To give a higher pressure and flow rate from a mixer shower a booster pump can be installed.
Gravity fed hot water system with Booster Pump
This system has a cold water tank in the loft or in the top of the airing cupboard and a hot water cylinder below it. The water in the cylinder is heated by a boiler or an electric immersion heater and fed to taps via a pipe from the top of the cylinder. As the hot water in the cylinder is used up, it is replaced with cold water from the tank above, which in turn is refilled from the mains water supply via a float operated valve. System water pressure is increased due to the addition of a Booster Pump.
Unvented System
An unvented system has a hot water cylinder that is connected directly to the mains cold water supply and there is no need for a cold water tank in the home. The water is heated by a boiler or an electric immersion heater. As everything is under the pressure of mains water, the flow rates from taps and showers are much better and a pump is not needed to get a powerful shower. An unvented cylinder can be installed virtually anywhere e.g. in an airing cupboard or garage.
Combination Boiler
A combi – boiler can be located anywhere within the home. More often wall mounted but some are floor mounted. It heats water ‘on demand’ when a hot tap or mixer shower is turned on. Connected directly to the mains cold water supply at high pressure there is no need for a hot water cylinder, cold water tank or shower pump in the home.
| Weight: | 2.74 kg |
| Size: | 8.5kW |
| Dimensions: | 10.8 x 20.8 x 30.8 cm; 2.74 Kilograms |
| Model: | SFX7008GSI |
| Part: | SFX7008GSI |
| Colour: | White |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Manufacture: | Triton |
| Colour: | White |
| Quantity: | 1 |
| Size: | 8.5kW |
Direct replacement for my original shower that broke after 8 years.. took 30 mins to replace by myself
Hopefully this is very easy to install like the last one? Haven’t installed it yet but will update when it’s installed.
Fairly easy to install although multiple access points for water and power is a false description. Works well though with simple controls.
Very pleased with the product good quality, will recommend well worth the money.
I have just fitted one of these today but I did not buy it from Amazon. I wanted a Triton to replace our old Triton unit which I fitted many years ago. When I replaced my shower the last time the screw positions and entry points were exactly the same so it was an easy exchange, this one is slightly different so a bit of drilling was required but no problem. So in all very happy.
lovely shower , bought to replace my old one which was at least 12 years old so hope this one lasts that long .
Got what I expected and satisfied price was very reasonable compared to other places