Unika JIGN277P-AZ Multi-Surface Worktop Trade Jig
| Weight: | 7.04 kg |
| Dimensions: | 124.5 x 47.4 x 3.05 cm; 7.04 Kilograms |
| Model: | JIGN277P-AZ |
| Part: | JIGN277P-AZ |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Manufacture: | Unika |
| Quantity: | 1 |
| Weight: | 7.04 kg |
| Dimensions: | 124.5 x 47.4 x 3.05 cm; 7.04 Kilograms |
| Model: | JIGN277P-AZ |
| Part: | JIGN277P-AZ |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Manufacture: | Unika |
| Quantity: | 1 |
The pegs are way too tight as in you couldn’t hammer them in… pegs are 10mm holes are around 9.5mm. I ended up putting pegs into end of my drill and wrapping sand paper around them to machine them down. Worked well they are now a nice snug fit. Take your time if you do this last thing you want is lose pegs
Really good bit of kit apart from the pegs are very tight they are clearly not made for this produc
This is a great product easy to use and accurate
Done a 10mm joint on square edge worktops
Everything line up amazing and easy to use
Very happy with the jig , really easy to use great results and very good value.
Nice jig, brought it for the solid laminate worktops as I already have a jig. Would have given it 5 stars but the pegs you get with it are too tight so have to use my old ones from a different jig.
would have been nice to have had manual and pins
i feel they should have come with Jig
would have been nice to have had manual and pins
i feel they should have come with Jig
Brilliant and does the job well better than the usual 35mm
Leyendo algunos comentarios crea que seria de un material de poca calidad, pero para nada. Esta hecha de compact material bastante fuerte y duro. Mejor de lo que esperaba.
I’ve not actually used this tool yet, but it looks good for the job, and is more strongly constructed than I expected.Also the locator pins together with the instructions made it easy to use.
Etwas teuer fur was das ist, aber gibs auch teurer.
I bought a new one for an Apollo slab worktop and splashback in a new Benchmarx kitchen. Stays well clamped and it is well built, comes with some accesories and has plenty grooves for the drain. I bought it with a Unika Belfast Sink Jig to do the undermount sink cut, as good as a Tred i would say, no difference there. Well recommended !
Como bien mostramos en la foto de muestra , tuvimos que comprar dicha plantilla para poder finalizar montaje ya que la fabrica estaba cerrada por vacaciones .
Resultado a la vista esta y cliente satisfecho , por cierto la plantilla nos llego en 24 horas , muchas gracias y saludos .
Good jig works well, nice that got 2 settings 10mm and standard comes with pins &manual
Easy to set up and use- will cut many sinks in with this item
Pas encore test mais le gabarit est en stratifi donc solide, certes pas autant que alu, mais vu le prix du gabarit festool (+ de 3x le prix). Il est arriv en un seul morceau c’est le principal, j’avoue que j’avais un peu peur au vu de certains commentaires…
Par contre je pense que celui qui a prpar ma commande a pass un rveillon bien toxique. La notice n’est pas la bonne… MDR. J’ai retrouv la bonne aprs une petite recherche.
Did the job, easy to use, worktop connection came brilliant , be sure your blade is enough sharp, otherwise you can’t make nice cut.
Very good jig. Solid build and a lot of size options for many worktop sizes.
Good quality jig for a good price.
J’ai utilis une dfonceuse mtabolisme pas toute jeune en 3 passes parfait un peu en ttonnant pour un angle droit il faut usiner une partie depuis l’envers et l’autre depuis l’endroi
Perfect for compact laminate tops, only really needed it got for the toggle bolt cutouts. Good solid jig
Really well made jig, 6 x alignment pegs missing!
Could I have these sent out please!!
Let me know. thanks
Good quality, excellent piece of kit. Easy to use, and to set up. There is also a slider piece which helps you when setting out which other jigs did not have.
Really good item. I’m an experienced carpenter and fitter and this works without any issues. Really robust and can’t recommend more.
Superb item. Download instructions from Unika website and then you are good to go. Remember Mark twice cut once!!!!! And use a sharp bit at that.
Perfect well made solid jig . Very easy to set up joints always perfec
Great bit of kit. Yes, it’s expensive but it’s worth every penny. Perfect 10mm worktop joints.
Worth every penny – used for so many cuts and still going strong
Arrived on time and started paying for itself same day. Very happy with the quality of the product it should outlast me.