Defender Plastic Anti-Bird Spikes Pack | 30 m with Glue | Pigeon Control Guide | Various Size Packs


Strip of Defender Narrow Plastic Bird Spike being installed by hand onto a narrow wooden fence topFeral urban pigeon perching or roosting on a stone window ledgeLength of Defender Narrow Plastic Pigeon Spike being installed onto a white UPVC window sillDefender Narrow Plastic Bird Spike from the front highlighting the 2 rows of pinsDefender Narrow Plastic Bird Spike 6 metre pack kitDefender Fixing Silicone Glue Adhesive being applied to the base of a Defender Plastic Bird SpikeA strip of Defender Narrow Plastic Bird Spike being snapped into smaller pieces by hand

Clean the surface…

All packs include a 40-page Bird Control Guide, which features a in-depth bird spike installation guide. We recommend reading this before starting installation.

STEP 1: Ensure all surfaces are clean, dry and free from bird droppings.

Apply the glue…

STEP 2: Squeeze a 10 mm bead of Defender Fixing Silicone along the base of the spike. A thicker bead may be necessary if the surface is un-even. A caulking gun will be required if using but is not supplied.

Push down on to ledge…

STEP 3: Place the spike towards the front of the ledge and push down firmly. The glue will ooze through the fixing silicone holes, locking the spike in to position. For wider ledges, two or more rows may be required or consider using Defender Wide Plastic Bird Spikes.

Snap in to smaller pieces…

STEP 4: Every effort should be made to spike all possible landing sites that are 5 cm or greater. The spikes can easily be snapped to size, along 9 patented grooves, using your fingers. The spikes are also flexible, and if screwed or cable tied can accommodate a curved surface.

Defender Bird Spikes Narrow Plastic Defender Bird Spikes Wide PlasticDefender Bird Spikes Seagull SpikesDefender Bird Spikes Pipe Spikes
Max Ledge Protection: 100 mm 200 mm 275 mm 125 mm Pipe Diameter
Pack Size: 3 m | 6 m | 30 m | 100 m 6 m | 15 m | 50 m | 100 m 6 m | 12 m | 40 m 3 m
Material: Polycarbonate Plastic Polycarbonate Plastic 304 Grade Stainless Steel 304 Grade Stainless Steel
Suitable for Pigeons: ✔ ✔ ✔ ✔
Suitable for Seagulls: ✘ ✘ ✔ ✘
Pin Height: 112 mm 112 mm 150 mm 112 mm
Strip Length: 333 mm 333 mm 333 mm 333 mm


Dimensions: 33.3 x 4.7 x 10.9 cm; 2 Kilograms
Model: Anti-Bird Spikes
Part: EPN-030-S
Manufacture: Jones and Son Pest Control Supplies Ltd
Dimensions: 33.3 x 4.7 x 10.9 cm; 2 Kilograms

103 Responses

  1. Anonymous says:

     United Kingdom

    Put this on my balcony ledge as the pigeons visited the ledge everyday and marked it as their territory. Since I installed the plastic spikes the pigeons have never come back to my ledge and no more pigeon mess for me to clean up

  2. VickieJoydu says:

     United Kingdom

    These do what they say, but you can leave any spaces. These are designed for edge & railings, any space and pigeons will find it. I had to use in conjunction with spiked matting for a shed roof. It gets expensive for a larger area and are not the most attractive items, but better than muck everywhere!

  3. Anonymous says:

     United Kingdom

    When attaching to brick it’s far easier to put screws above the spikes and loop some wire through the holes opposed to screwing directly into the spikes.
    Being that the product is clear coloured makes them more inconspicuous and less of an eye sore.
    Overall happy with the spikes themselves however the price seems steep for what is a handful of plastic.