HUANUO Dual Monitor Wall Mount for 17 – 27 inch Screens, Wall Mounted Monitor Arm with Gas Spring Arm, Wall Mount Monitor Arm Support VESA 75/100mm, Load Capacity 3-8KG
HUANUO Monitor Wall Mount-Say goodbye to messy and crowed
At HUANUO, we focus on improving the strength and stability of the monitor arm. The dual monitor arm uses automotive-grade gas spring cores and has undergone 20,000 motion tests, which means it can be used continuously for at least 5 years of trouble free.
Positioning your monitor in the optimum spot has the potential to reduce eye, neck and back strain while improving your posture to make you more comfortable whilst you work.
| | | |
|---|---|---|
±45°TiltAdjust the angle of your monitor up or down slightly to provide you with the most ergonomic viewing angle. | 360° RotationThe left and right adjustment of the monitor screen allows you to share the screen with your friends in real time. | 180° SwivelThe horizontal and vertical screens can be switched freely to cater to your browsing habits. |
| Dimensions: | 35.56 x 22.86 x 10.16 cm; 4.13 Kilograms |
| Manufacture: | HUANUO |
| Origin: | China |
| Reference: | HNWDS1 |
Das Produkt hlt was es verspricht und hat dazu einen sehr guten Preis. Man kann seine Monitore drehen wie man will und die Qualitt und Stabilitt dabei ist hervorragend. Zu diesem Preis gibt es keine vergleichbaren Produkte. Empfehle ich weiter.
As others have stated, the monitors have a gap between them when pushed all the way back to the wall. We knew this going in thanks to the many reviews and were fine with that. We were looking for a low profile solution for a home office that pulls double duty as a spare bedroom and the gap doesn’t bother my wife.
Sono robusti e reggono 2 monitor da 27 pollici , un po’ male per regolarli , perch hanno bisogno dell’esagonale ed scomodo sopratutto se gi tutto attaccato per il resto top materiali ecc
I have previously owned a desk-mounted Huanuo monitor arm and needed to switch to a wall-mounted setup. I owned the desk-mounted arm throughout the interminable Covid pandemic and it was great, so naturally I chose to stay with Huanuo for the wall mount.
The arm itself is excellent and I recommend it—it’s just as good as the c-clamp desk mounted version. I have two 24-inch monitors attached.
Installation was fine. Given the reviews, I was expecting to need to draw my own template and purchase additional mounting hardware, but as it turns out they have added a precut template and more mounting hardware to avoid these issues. That was a pleasant surprise and I am glad to see Huanuo responds to customer feedback.
I experienced two issues: One of my own making and one inherent in the product, First, I did not realize this mount was not compatible with steel studs. Many new build apartment buildings use steel studs instead of wood studs because of their fire resistance (along with other nice features). Because steel studs are typically narrower than wood studs, and because toggle bolts require approximately half inch holes to mount, I did not see a way to sturdily attach the mount to the steel studs without an uncomfortable chance of accidentally cutting one face of the stud in half with the drill bit. This was my own fault.
Instead I anchored a 4.5 foot fence post to a concrete block and fastened the monitor arms to post. This, while not the prettiest thing I’ve ever made, is working fine. In doing so, I discovered that the provided lag screws are not of great quality. The manual recommends installing with them a socket wrench, but this would be a giant PITA, so I first used a socket adapter in my drill to get them most of the way in and then hand-tightened at the end. There is no way you’d be able to use a standard Phillips head drill bit without stripping the provided screws.
Even with the socket adapter, the provided lag screws barely got in—the screws are quite soft and the indent that marks where the screws are fastened means you get maybe a quarter inch of grip on the head to drive it into the wood. This is a pain but not a disaster—I would recommend just buying your own lag screws of comparable size (size given in manual) and use those instead.
Additionally, a very minor annoyance is that one of the thumb screws meant to keep the monitor in the bracket was a little too large (the other fit perfectly). I think its something like a #6 machine screw; I had something lying around that fit and used that instead. No biggie.
tl;dr: great mount, subpar mounting hardware but that is easy to get on your own.
I bought these for my home office, very easy to install and use. The best part is how affordable it is.
Brought this to expand my set up, the walls in my house tend to be on the thinner side and you’d need special wall plugs to really get it sturdy and in my case it definitely could be sturdier but does the job.
The arms themselves are somewhat stiff so if your expecting smooth gliding motion it’s not always the case depending on the direction, some shake in there but they have worked well for swinging a monitor over to my desk. Tilting them up and down you’ll need to loosen them so you can’t always just do that on the fly. They do the job I needed them for, may replace them with a different type of set up in the future.
Its an excellent bracket. The problem I have is that in order to position the two monitors next to each other they are too close to me to focus. They should have made the piece that attached to the monitor that could slide on the arm. Or make that arm telescopic.
Not difficult to setup. I have been using my two 27′ monitors monitors for a few months now. No issues.
This is ok, but in my view attaching two monitors on a two arm single point mount is always going to be slightly flawed as there are only so many places that the monitors will sit nicely together and you can be guaranteed that these won’t be quite where you need them. Do yourself a favour and buy two separate pole mounts.
Doesn’t sit flush to the wall with 2 monitors attached but gives a wide array of possibilities through its felxiblity
Perfetto x la gestione di 2 monitor. Permette di posizionarli come si vuole
Diese Wandhalterung hat mich total berrascht. Angesichts der nicht all zu groen Auswahl an Doppelwandhalterungen und dem relativ gnstigen Preis waren meine Hoffnungen auf ein Qualitativ hochwertiges Produkt eingeschrnkt. Doch als die Halterung ankam war ich schwer beeindruckt.
Positiv:
– saubere Verarbeitung, stabiles Material und hochwertiger Eindruck
– verstndliche Anleitung, Schrauben und Dbel sind dabei
– ich habe zwei unterschiedliche Bildschirme montiert, einer leicht, der andere etwas schwerer. Beide halten sofort, ohne Schwanken auf jeder einstellbarer Hhe. Die Hrte der Tragkraft ist an einer Schraube einstellbar. Bei einem leichten Bildschirm wird die Feder (oder der Spannmechanismus) natrlich nicht so hart eingestellt als bei einem Schweren Bildschirm. Die Range der Einstellbarkeit ist relativ gro.
– der Preis bewegt sich im Bereich der einfachen Wandhalterungen, daher Top
– die wichtigen Gelenke kann man fester oder lockerer Einstellen
– die Halterungen sind seit drei Monaten im Einsatz und sind wie neu
Negativ:
– Montage: Das Teil macht einen hochwertigen und massiven Eindruck, das ist es auch. Es wiegt einige Kilo. Ich hab die Montage alleine gemacht, es empfiehlt sich aber, die Montage zu zweit zu machen. Die Arme sind in der Horizontalen an drei Gelenken beweglich, in der Vertikalen an zwei Gelenken (Gelenk der Bildschirmauffassung mitgerechnet). Das macht die Halterungen insgesamt sehr sehr unhandlich. Eine Montage alleine erfordert Geschicktheit, Ausdauer und Geduld. Bei mir hat es funktioniert, jedoch war die unterste Position der beiden Bildschirme am Schluss leider etwas hher, als ich erwartet hatte. Aber nicht weiter tragisch…
– Aufgrund des Gewichts und der ntigen Einstellungen an der Spannhrte der Arme ist es nicht wirklich mglich, die Halterung samt Monitoren an die Wand zu halten um die ideale Anbring-Hhe testweise zu begutachten.
– an jedem “Arm” ist ein schwer lsbarer gelber Warnhinweis-Aufkleber, etwa vier auf drei Zentimeter.
Fazit:
Wrde ich jeder Zeit wieder kaufen, der Preis ist absolut gerechtfertigt.
Ideal wre es, wenn ein kleiner Hinweis fr die Anbringung der Bohrungen in Bezug auf die untersten bzw. der obersten Position der Bildschirmfassung (eventuell auch Spanne rechts und Links) angegeben wre (die unterste Hhe der Bildschirm-Unterkante bzw. die oberste Hhe der Bildschirm-Oberkante wre natrlich noch genialer, aber da gibt es bekanntlich unterschiedliche Gren und Lngen). Dann knnte man die Position der Schrauben an der Wand realistisch abschtzen ohne dafr das Teil samt Monitoren mit einer Hand an die Wand halten zu mssen und mit der anderen die Bildschirme die Bildschirme in verschiedene Positionen ausrichten. Dann wre die Montage auch alleine machbar und man erhlt ein Einwandfreies Ergebnis.
Positiv berrascht hat mich die zuverlssige Einstellbarkeit fr unterschiedliche Bildschirmgewichte. Die Bildschirme halten zu dem perfekt in ihrer Position.
Klare Kaufempfehlung
This mount is amazing!! Very well built, I like the fact that is overbuilt. Large mounting plate for wall, large pivots, gas shocks, and sturdy metal arms. Packaged very well, all the hardware was included as well as tools for torquing the shocks and installing monitors. Great product.
This wall mount is very well built, and with the monitors suspended, I have much more clear work space! I have a 34″ LG 34UM59 LCD ( actual width 32.5″) and a 27″ ACER S271HL LCD ( actual width 25.25″ ). I tightened the gas piston for the 34″ LCD and it holds perfectly. I didn’t like the idea of mounting it directly to the wall, so I mounted it to a 2 by 6. I used 3/8-16 cap screws 1.75″ long. This required re-drilling the mounting holes slightly oversized to fit the bolts. Then I used 3/8-16 “t-nuts” through the back side of the 2 by 6. Once I hammered in the t-nuts, I mounted the 2 by 6 to the stud, using lag bolts, placing it flush on the desk to help support weight. The wall mount is then bolted on. One thing to mention is to mount the HUANUO down low near the desk. I have shelves which are 23″ above the desk. The monitors can move the full vertical range. The attached picture shows the monitors side by side when pulled out as far as possible.
L ho utilizzata per posizionare a parete i miei 2 monitor da 28 pollicila staffa semplice da montare e permette parecchie regolazioniunica pecca che per avere i 2 monitor vicini bisogna metterli parecchio in fuori dalla paretese si cerca in installazione vicino alla parete coi 2 monitor vicini vicini non L ideale
I purchased this duel monitor support system because a desktop stand on one of my monitors failed completely, without any action on my part; it just broke. So, I was looking to upgrade to a duel monitor system which would not require mounting to the desktop; my desktop is glass.
I ordered this 2 days ago; it arrived yesterday evening.
After a light review of the instructions, and knowing how to properly mount things on a stud behind drywall, I went to work. Taking advice of the person who recommended a cardboard template, I created one from the cardboard within the shipping box itself. I used a stud finder to find and mark the outer boundaries of the stud on the wall. I used a level to mark a line for the placement of the cardboard template. I drilled pilot holes as the template had been marked accordingly. I used an electric drill to drive the hex cap lag screws into the holes, with the mount held against the wall. I attached the mounting bracket to the monitors and slid them into the arms. Note: you may have to loosed the final joints on the monitor arms to allow for easier movement in the up/down direction; not too loose, not too tight. I placed the cables in the bottom arm channels with removable covers.
The system is now in place. about 30 minutes to complete install. It is well designed. It is well worth the price asked. You will not be disappointed.
The screws which ho9ld the monitors to the arms were not in my package. As weight alone holds the monitors in place this was not a great concern. I may go to the hardware store and obtain hand turn screws to insert into these holes just to assure firmness of the joint. The monitors can wobble slightly without them; no big deal as they would not wobble when not being moved.
So, if you need to mount two monitors to a wall, this is a very good way to do it. Buy one and see for yourself…
Preis passt allerdings zur Qualitt. Htte es echt gern genutzt.
I’ve been using it for over a year now still as sturdie as it was when it was setup. Perfect for my dual monitors
I did a lotttttt of looking around and ended up with this mount for my monitors (Two 27″) the arms are extremely solid, overall mount construction also extremely solid. Arms move any way you can imagine and my screens line up perfectly straight. 10/10 would buy again.
Try and get help hanging it. The mounts very heavy and was a pain in the @$$ to hang along, not impossible, just not fun until you get one screw all the way down to keep it holding itself
Supper easy to install, though I did find the lag bolts they provide a bit overkill. Very nice looking and lots of optional positioning
Im Lieferungsumfang sind der Arm selbst und die fr die Montage bentigen Schlssel ordnungsgem und ordentlich verpackt. Bei der Montage selbst empfehle ich eine zweite Person hinzuzuholen da dass dann doch eine ziemliche Fummelarbeit war. Das Teil ist sehr robust und hlt 2x 27 Zoll Monitore Mhelos oben, am Arm selbst ist der Gasdruck entsprechend leicht und mhelos einzustellen.
There’s no mistaking that this item is solid and well built, also relatively heavy. Following the instructions, I located the wooden stud within the wall and marked the centre. The instructions then said to hold the unit against the wall, hold a spirit level to the top and to mark your holes to drill, doing this on my own was impossible as it’s so heavy that there was no way I could hold it with one hand and mark with the other. My only other gripe was with the lag screws, trying to use a screwdriver or impact driver on these was impossible, I stripped all three screws even after drilling larger pilot holes than the instructions suggested, I’d highly advise have an M6 socket or box spanner handy to get these into the wood.
The adjustability is amazing! Up, Down, tilt, twist, left, right. I did have to adjust the gas struts but not a big deal.
It was a good mount easy to use I would recommend and get another one if I had more mounts
easily supports a 24-inch monitor.you can adjust its hardness, height and position, I would buy it agai
Rapporto Qualit-Prezzo incredibile! uno dei migliori in assoluto. Facile e veloce da montare, qualit dei materiali di alto livello e robustezza unica. Ottimo prodotto! Molto snodabile e facile da utilizzare e modificarne la posizione. Utilizzato per due monitor curvi da 27 pollici
Facile d’installation, ce produit rpond entirement mes attentes et est trs pratique.
Great quality product with attention to detail.
Pros:
-Sturdy
-Well Build
-Cord organizers built in
-Strong adjustable springs.
Cons:
– When you use the 27inch monitors you loose almost all your range of motion. The arms can hold them, but the only adjustment you can make without them overlapping is up and down motion.
Un excellent support pour deux crans au format standard VESA 100/100.
Les chevilles pour le bois et la briques sont fournies mais rien pour le placo videmment : il faudra prvoir de petites (mais pas trop) chevilles.
Le rglage en hauteur se fait par rglage de la tension en fonction du poids de l’cran.
On positionne ensuite comme on veut l’emplacement.
Prvoyez d’tre deux pour un positionnement correct car le support est en fer et donc assez lourd en plus d’tre encombrant.
Trs content en tou
Easy to install, range of motion is as described, and moves smoothly. very sturdy 10/10 would buy this again for my next project.
le recensioni lette mi lasciano sempre dubbioso sui prodotti che voglio comprare, devo dire che la qualit notevole, robusto (ho attaccato 2 monitor da 27″). mi sarebbe piaciuta una maschera da applicare al muro per segnare la posizione dei fori per i tasselli. i bracci sono pesanti e due persone per il lavoro sono consigliate
Overall I can’t fault the product for what it is. This is a good product that does what its suppose to do but you’ll only know if it is the product for you once you mount it and play with the arms to set your monitors.
I have a 24″ Acer (SA 230 bi) and 27″ MSI (Optix G27CQ4) mounted in the center and I have to chose if I 1) want them further back against the wall with a large gap in between or 2) too far forward and close together. I think for those that want to put their monitors in the corner it will work very well for you.
Mounting: I recommend making a template for the screws and being confident in finding the stud. the top two screws will work with the 1.5″ but in needs to be dead on. The instructions also call for too big of a drill bit size. Double check it against the screw and make sure it’s smaller for the threads to get a good grip.
VESA mounts: Mounts are good but the spaces and screws are not a “one size fits all”. While the instructions call for spacers and the longer screws on curved monitors, the Optix G27CQ4 required the longer screws to be cut a bit for a proper fit so you don’t damage the internals.
Like: sturdy design, good range of adjustment
Dislike: 10″ gap between monitors when pushed close to wall, when close together they are about 16″ forward of the wall.
This mount is working pretty well, the install was super fast and easy. Sturdy install into stud, I feel safe having 2, 24″ monitors mounted and hanging above my new 32″ curved 2k display.
The only issue I have with this is mount is the positioning feels stiff/locked, and not as in how hard/easy the monitors themselves are to move but the range of motion is not as fluid as I like, want one of the monitors about half an inch over from where it is now but no big deal.
Great product overall.
Easy to install and so far works great. Purchased two, one for my work office and one for my home office.
Perfect bracket but the dimensions included aren’t exactly what I was looking for. It’s easier to get them now that it’s mounted.
From the top of the wall bracket to the center of the arm bracket is 4″ lower at its lowest point. There’s 11″ of vertical travel so the highest point for the arm is 7″ above the top of the wall bracket. The maximum travel horizontally from center of both brackets is 19 1/2″. Hope this helps!
This item is good quality for sure! Very well built but it doesn’t seem to have very good range of motion. The 2 monitors sit quite far apart from each other and there doesn’t seem to be a way to adjust that.
Works and looks way better than pictures. Got rid of my table mount and this is just totally worth i
Well built and sturdy, used to mount 2x 27″ monitors on the wall. Make sure you have a stud where you want it, otherwise it may be at the edge of your desk and you may have your monitors to far away from the wall or appart. The wire handling is nice, but my monitor power cables are to short to run in the channels and still make it to outlet. It would be nice if they had a 16″ or 24″ cross extension so you hit two studs and than mount it anywhere on the wall you want.
I felt largely overwhelmed by the number of offerings for dual monitor wall mounts. I watched several YouTube videos and read tons of reviews before finally settling on this one. In the end, I chose wisely! The Huanuo wall mount exceeded all of my expectations. The mount is sturdy, well-built, and a great value. For cable management, the covers allow for routing of one HDMI cable and one traditional power cord. The range of motion is great, but I can understand the concerns of those who want their monitors side-by-side and near touching. I prefer some distance between my monitors, so after installation, I was able to return my monitors to their previous locations, but without sacrificing the desk space under them. The only real negative comment I have is that an installation template should have been provided. The apparatus is cumbersome to hold while measuring to make sure it’s level. Oh and be sure to mount it to a stud! The instructions aren’t clear on that, but I knew to locate and screw into a stud. Overall, I am really truly happy with this product!
This brand has worked well for us and this seems an even slightly better made unit than the last one we installed. BEFORE you get started find and read the manual and the “Caution” label in the box – it will throw you for a loop if you just start cutting tie traps and bands. “Ouch!” Only problem with the install was taking several measurements to “best guess” how high to mount it. We assumed the center of the swivel on the base as the center point to work from – and that worked OK, but I think we mostly just got lucky. We also had a 2×4 exactly in the center of our desk space, so that was VERY helpful. Do make a tracing of the mount’s “footprint” and use that to mark/test where is should go on the wall. I have no idea why that’s not in the box – simply nuts to do what the directions say and try to pick this thing up to mark the holes. And, make sure you know where the center of the 2×4 (if that’s your support stud) is because the top two holes on this are very close to the outer edge and you can easily miss. Bear in mind your monitors may be heavy – and heavier when you start shoving them up and down. You don’t want to be “that guy” who tore up his wall because he only “almost” got into the wood… We’ve done these before – over-engineer the support on this. We’ve had more than one person go, “Oh, wow!” and grab the monitors and start jerking them around like we’d never do. Anyway, good design… Works very well if you pay attention to ALL the details in the set up. Good luck. Do it right and you’ll be happy with it.
first the package is heavy. its metal. it well made.
2nd : the arm can easily hold 27″ monitors since these days monitors are so lightweight : its not a problem.
the instructions are easy .
you will need to drill 3 holes in the wall and the only drawback I found is the 3 mounting screws supplied in the box are too thick. I used my own mounting screws which works perfectly.
the device has nice cable management tunnels. you can tilt the monitor to any ! direction . turn it 360 deg. so even if you screwed the back plate a bit offset , you can easily fix the monitor position horizontal later on by minor arm adjustments.
there are screws to even adjust the spring strength.
I love this arm.
first the package is heavy. its metal. it well made.
2nd : the arm can easily hold 27″ monitors since these days monitors are so lightweight : its not a problem.
the instructions are easy .
you will need to drill 3 holes in the wall and the only drawback I found is the 3 mounting screws supplied in the box are too thick. I used my own mounting screws which works perfectly.
the device has nice cable management tunnels. you can tilt the monitor to any ! direction . turn it 360 deg. so even if you screwed the back plate a bit offset , you can easily fix the monitor position horizontal later on by minor arm adjustments.
there are screws to even adjust the spring strength.
I love this arm.
Sturdiness 8.5/10
Anti wobble 9/10
Range 7/10
Install 6/10
Ease of use 8/10
Needed wall arm for my second monitor, realized a dual monitor arm setup was basically the same price in the cheap range and I am very content with this one, rather impressed actually.
Build quality is quite impressive to be honest, wasn’t expect that. Wall mounted so can’t really say for the wobble but by manually shaking the arms and stuff it doesn’t wobble much, much less than a cheap monitor stand for sure.
Install was alright, I had trouble with my main monitor which’s vesa mount is extruded 1″ inwards. The vesa mount is rudimentary but solid. I suggest using a level of course.
Range of motion is alright, I wish it had more vertical range so I could have them sit more flush to the wall, right now at max height they’re sitting with visual interface at exactly 12″ from the wall.
Cable management works fine though my main monitor with power, HDMI, DP, USB cable running down the arm wouldn’t fit in the tiniest tray although it fit the wider one. Simply tiewrapped it to the arm no big deal that’s not a problem for me.
Thanks for making a very good and affordable product. I will say again, I was impressed by this product.
Easy to mount, decent range and sturdy. Holds two 24″ Dell p2427 with ease. Hard to beat for the price.
Easy to mount, decent range and sturdy. Holds two 24″ Dell p2427 with ease. Hard to beat for the price.
It’s a super nice tools if you use more than one monitor. I recommended
very sturdy, doesn’t sag, perfect set up for me but I am only using 1 arm right now. Later I will add another smaller monitor. Would recommend.
If you have any experience mounting anything to a wall, these dual wall mounted arms are super easy to put up. First off, the mount does not come with mounting tools such as drill, drill bit, phillips head bit, level, or stud finder, which is expected as all of which made the installation easy (you definitely want these tools for all your future installations anyway). I did the entire installation by myself, so that means one person is capable of doing it alone. The mount does have some weight behind it, so that could make it harder, but still easy to install. Once mounted to the wall, I attached one monitor and made adjustments to the tension screws and placed it where I wanted. Once the first arm proved it wasn’t going anywhere, I installed the second monitor the same way. I have my monitors set side by side, horizontally. I’ve had the dual wall mount for several months now and have not needed to make any adjustments to the tension screws. Very sturdy. I’m a gamer and get excited sometimes, which results in jumping around which caused my monitor to shake when it was physically on my desk. The wall mount has completely eliminated the shaking or movement caused by my excitement. The range of motion it offers is by far enough for both monitors, as you can place them in several positions while on the mount. Overall a great buy, especially as a pc gamer who streams.
Was exited to mount these for my dual monitors, although i used one placed horizontally (normal) and the second one placed vertically, the mounting was kinda tricky since my desk is L shaped. And i had to play with the measurements before drilling the holes. Overall a lot better than the one i owned and since my monitors are not that heavy. Would recommend!!
It is pretty good the only thing I wish it had was a paper diagram so I can line up the holes easie
It is pretty good the only thing I wish it had was a paper diagram so I can line up the holes easie
I work from home on occasion and with limited desk space, I needed something to accommodate a laptop, docking station, and dual monitors. In addition to the work equipment I needed room for our 27″ Apple. By mounting the arm just slightly above the home pc I was able to get the dual monitors to store up and out of the way when not in use. Thanks HUANUO for making my home office setup functional for work and home use.
Solid setup, does stick out like other reviews mention. Instead of getting the height where you want it and tightening it there, you loosen the adjustment screw until it can droop freely to where you want it to be. It’s a bit odd, but it does work
Mount is a great solution if you want two monitors side-to-side and stationary. They aren’t particularly fluid in their movement but won’t move once they’re in the right place. Makes my “work from home” days a lot easier!
Had an issue with one of the arms not working. Contacted the seller, had the replacement pieces sent and received within a week. Amazing! I love it!
I have had two curved monitors for several years and have been looking for a way to get them up off of my desk. This mount was the answer. My husband and I installed it without much issue. It is sturdy and now I have the range of motion to easily adjust them in any direction. I would give it six stars if I could.
I have had two curved monitors for several years and have been looking for a way to get them up off of my desk. This mount was the answer. My husband and I installed it without much issue. It is sturdy and now I have the range of motion to easily adjust them in any direction. I would give it six stars if I could.
I use this to mount a 27 inch and 24 inch monitor. The built quality is amazing. I 100% recommends this produc
I use this to mount a 27 inch and 24 inch monitor. The built quality is amazing. I 100% recommends this produc
Drill 3 holes, align, screw into place. Mount VESA brackets on screens, clamp on arms, screw top to secure. Movement range is exactly as advertised.
I wouldn’t apply full body weight on it, but it is sturdy.
if you have dry wall. try and find the support beams in your wall. there are tools for i
Easy to assemble. I was able to install without the assistance of another person. Though having a second person would have made things even easier. I was initially concerned that this system would not be strong enough to house two 27″
Monitors but once I mounted the bracket into the stud behind the drywall it did not budge! The screws and washers provided are super heavy duty. Very very thick and provide excellent support! Also the instructions and tools provide are very easy to read and use with excellent step by step instructions.
The build quality is surprisingly solid and the range of motion is excellent for all kinds of different layouts. The Allan keys provide are excellent for fine tuning your layout and provide a quick and easy way of adjusting/ tightening things up.
CONS:
If you are new to mounting (as I am) you will need a 5/32 drill bit (4mm) to pre drill your 3 holes 55mm deep. This delayed my install until additional tools were acquired as I was under the impression that all I needed was a power drill and some screwdriver bits.
The bracket for concealing wires are a bit finicky and do not seem to like thicker cables. I was able to fit two (power/display) on one bracket and 3 (power/display/hdmi) on the other. The trouble is the top brackets will pop out easily when moved which is slightly annoying. The bottom brackets are surprisingly stiff and difficult to place back into position once removed. You may need to use the but of as screw driver to lock it back in place after you’ve threaded your cables. I find the bottoms ones to be more secure due to the sliding mechanism below vs the clip in mechanism on top.
Final Thoughts:
Excellent product. Great value here. This is a good buy.
However, make sure that your lowest point of display is mocked up before hanging. Due to the placement of the mounts themselves via their VESA coupling on the back of my displays, they are about 4″ higher than the most ideal location they could be. I will have to remount, but that is my own incorrect analysis.
However, make sure that your lowest point of display is mocked up before hanging. Due to the placement of the mounts themselves via their VESA coupling on the back of my displays, they are about 4″ higher than the most ideal location they could be. I will have to remount, but that is my own incorrect analysis.
The item is exactly as described and it is great quality. It’s heavy yet sturdy. The installation was pretty simple especially with the included instructions to go by, but I would recommend making a template of the mount for marking your spots on the wall. The mount is heavy so it’s complicated to hold it in place long enough to get your spots marked. Getting the monitors mounted was simple as well, my only complaint is the bolts for tightening the tilt of the monitor were hard to get tight enough with the included Allen wrench for the monitors to stay put. I ended up getting a ratchet with the right attachment in order to get it tightened down enough.
My only complaint overall, is the pictures and description would lead one to believe the monitors would be able to butt up to one another (with no gap), but the only way I can get this to work is to have the arms fully extended. Once I got the monitors adjusted I ended up with a decent gap between the two and have to look further to the left and/or right than I wanted, but I was able to get them to where they are fairly comfortable. Overall great product and great quality, and there are a lot of pivot points and flexibility in it, but unless you have monitors that are larger than 27″ you’ll probably end up with a large gap between the monitors (if that’s an issue for you).
The wall mount is sturdy and has a wide range of motion. It is perfect for my 24inch monitors.
I love this armature; makes it easy to lower and lift two screens; I can even have one screen in a vertical position, Definitely durable, and no problem setting up the armature in the first place.
I love this armature; makes it easy to lower and lift two screens; I can even have one screen in a vertical position, Definitely durable, and no problem setting up the armature in the first place.
Just installed. Do not have both monitors on it yet. Should be fine! Would recommend!
This made my dual monitors arrangement and usage so easy. Recommended if you need a dual wall monitor stand
Mount works perfect for holding two 24″ monitors. Very impressed with ease of install. I actually have four monitors and use two of these.
Holds my 2 27 inch monitors up with ease. Was easy to install
Works very well. Securely anchored to the wall and tensions for monitor movement are great! Only knock, the mounting bracket has three lag screws for the wall. Their silver while the bracket itself is black. Kit doesn’t come with any covers for the mounting screws so they clearly standout.
Have had it for about 2 months now and haven’t had a single problem with it. I was able to detach one section of the left arm to make it shorter as well.
Requires careful planning to locate mount directly over a stud or something solid, not drywall anchors alone. If no stud available, mount to backboard and attach that to spread the weight.
Giving this wall mount a 4-star review as I had an issue getting the up and down tilt to actually work. The allen bolt to adjust the gas strut is a good size and it allows you to tighten it enough in order to pick and choose exactly what height you want the monitor to sit whereas the up and down tilt is another story. The very small allen head is a pain to work with, and 2 out of the 4 I could barely even get the allen wrench to fit in as the paint was laid too thick on the inside. Once you actually start to tighten the bolt, you find yourself cranking on it as hard as you can to where the head either strips out, or the monitors still sag. Keep in mind I have two Odyssey G5 curved monitors that weigh only 9lbs each and the company claims that each arm holds up to 17.6lbs, so for it to still struggle to hold it at the right angle is very frustrating. I ended up having to drill a bigger hole through the bracket completely and running to Home Depot to stick a 13mm bolt through with a nut on the other side as you can see in the pictures. I am now able to tighten them enough to hold the monitors at the right angle without worrying about anything stripping out. Other than that, the quality of the rest of the piece was great.
I purchased this for my son and he loves it. Very easy to install and easy to maneuver and align the screens. I highly recommend this produc
Great product. Very sturdy. Followed the directions and it worked like it was supposed to. Just like any wall mount, with an extra mounted monitor. Follow the directions and it should be ok. It holds my monitors just fine. The install was pretty easy. Finding the studs and not having a ratchet was the hardest part. The rest was cake.
This is everything it describes. Relatively easy to install, though I had to take the arms off and then put them back on after the wall bracket was drilled in. Otherwise, everything went smoothly
This is everything it describes. Relatively easy to install, though I had to take the arms off and then put them back on after the wall bracket was drilled in. Otherwise, everything went smoothly
It’s heavier than I expected definitely recommend two people setting this up
Installation was very straightforward. Just make sure to anchor it properly. I put mine into the studs. I had to do some work getting the monitors to line up like I needed them to but it worked out great. Very happy with this and would definitely recommend it.
Arms are to long and can’t put both connected to each othe
I like how easy it was to install, sturdy and this is available for more desk space. The hard part to get the power cords to go through the “arms.” If you put the monitors closer to each other, you would have to move your desk further from the wall or else the monitor is about a foot away from the wall. Otherwise, I do love it, it is a great product.
Worked perfect, well made, easy install. It was actually a Dream Fit.
This is a great product. It was super easy to put together, and mount. I use this everyday at home, since home is now my office and it allows my to use a space as my office, but also tuck the screens to the wall when I’m done and you don’t even notice them anymore. With all arms like this, it takes some tinkering to get the adjustments just right, but once you get it, they are perfect.
Very tough son of a b****h, love it. Everything is metal except for the wire cover. I really wasn’t expecting much but I was pleasantly supprised by how solid this thing is.
Bought this to mount my two 27inch dell monitors and get some more space on the desk. Overall, setup was not too bad and probably took a total of 30 mins (minus Home Depot trip to get some screws). For my setup I have one monitor centered and other monitor on the left and this mount seems to work well. I was able to push one of the arms all the way back and the other one comes out at an angle and probably a foot over the desk.
I mounted this on a stud but the provided lag bolts stripped half way into the stud. I did drill pilot holes first. Ran to Home Depot and got some sheet metal screws of similar size and they worked perfectly.
I’m returning it because with my current setup I can’t put my screens side by side without losing in depth.
This is an excellent product once it is correctly installed. It has an ample range of motion, sturdy. You need to read the intructions first before even unwrap it.
I thought I will get away installing it with 80lb (max I found) anchors, but they couldn’t hold it with the monitors. My bad because they highly stressed not to do that. Then I installed it again finding a stud and it is very solid. I am not afraid that the monitors will fall. Then, ajusting the air spring to the correct level you can position the screen in any position.
Here are my suggestions:
1. I built a template out of cardboard
2 After taping the template to the wall I used a push pin to mark my pilot holes
3. There is no way that we secure the lug bolts with the included wrench, you need a drill. Don’t use a Philips bit, the threads will strip. Use an 11mm hex bit.
Great product overall, it does have plastic trays that are there to help wire management, although I find them easy to pop out if you have really sturdy and thick wires.
Product is used for two large monitors. No issues with weight works like a charm
Love these arms they are monsters. Had to put our computers at the table because of space, didn’t want 2 desks in the way. They make it feel like a futuristic setup. Can move them anyway we want with no problems. Definitely recommend, they are tuff and sturdy with 2 27 inch screens.
Bought two of these so I could mount the two monitors for each computer. Setup was honestly pretty easy. You’ll note, and I think other reviewers have noted, that if you’re going for my look, the monitors WILL be off the wall a solid foot, and there’s nothing you can do about it, at least with these 22″ monitors. Perhaps if you were using two very large monitors you’d have to push the arms back to get them side by side but as you’ll see in the pictures, this is what it took to get me setup. For me, I could care less about the extension distance from the wall. I got the setup I wanted.
Somehow I was able to do the install by myself. Use a stud finder if possible, otherwise, I used 16 OC from the whiteboard above and up from the electrical box below. Intersected the lines and no issues. When installing, try and get them completely level but don’t freak out if they aren’t level because you can adjust the monitors rotate left/right a little bit if it’s an issue. I used a drill bit in one hand, pinned the mount on the wall with a level on top with my other hand, and then scraped the three holes so I knew where to drill. Drilled pilot holes and then set the screws and mounts in place. After a little bit I HAD to use a ratchet to snug it up and get it all the way to the wall as the impact/drill just couldn’t keep going. Make sure you get the mount all the way to the wall and it’s snugged up nice. The lag bolts were perfect, thankfully I nailed my pilot holes so all (3) holes for each mount were exactly on the stud (thank God).
All in all, very very sturdy. I made a few minimal adjustments to the tension screws for the monitors. The cable management for the mounts was pretty nifty, I still need to velcro down all my cables for everything else but I might wall mount my docking stations and laptops, so we’ll see.
In all, you’ll be glad you got this. I do a lot of IT work and wondered if I needed a painted plywood backer board on the wall and that’s completely unnecessary. All in all, great gear, and I’m thrilled to have my dream setup.