Makita DCS552Z 18V Li-Ion LXT 136mm Metal Saw – Batteries and Charger Not Included
Makita DCS552Z
- Blade diameter 136mm
- Maximum cut at 0 degrees 50.5mm
- Bore diameter 20mm
The built in dust collection system on the DCS552Z means a cleaner work place and metal chips and dust can be thrown away by opening the cap of the dust box, the easy disposal system.
Lock off lever to help prevention of accidental start-ups when a battery is inserted and electric brake for increased operator safety and maximum productivity.
Conveniently located shaft and lock for easy blade replacement and flat motor housing end allows the tool to stand upright when changing the blades.
There is an on tool hex wrench to keep it from getting lost and for fast, easy blade changes.
Please Note: Any accessories shown are not necessarily supplied as standard equipment.
Makita DCS552Z 18V Li-ion LXT 136mm Metal Saw – No Batteries Included
The DCS552Z cordless Metal Saw is compact and lightweight, powered by 18V Li-ion LXT slide type battery (not included) to deliver up to 3,600 rpm for faster cutting into a wide range of metals, including unistrut, all thread, steel, channel, conduit, pipe, sheet metal, square tubing and more.
The DCS552Z has a heavy gauge, precision machined base for smooth, accurate cutting and added durability, with stainless steel base plate and a large cutting capacity of up to 50.5mm at 90 degrees. A large viewing window to allow for easier cutting along the line of cut. Twin LED job light with after-glow to illuminate the work area
| Weight: | 2.09 kg |
| Size: | 136mm |
| Dimensions: | 33.2 x 21.59 x 23.01 cm; 2.09 Kilograms |
| Model: | DCS552Z |
| Part: | DCS552Z |
| Colour: | Blue |
| Pack Quantity: | 1 |
| Batteries Required: | Yes |
| Batteries Included: | No |
| Manufacture: | Makita |
| Colour: | Blue |
| Quantity: | 1 |
| Size: | 136mm |
Ho tutti gli utensili Makita questa sega circolare la utilizzo per tagliare le barre di alluminio della struttura degli impianti fotovoltaici. Prodotto perfetto
Big upgrade from my old one (which to be fair was at least 10 years old). In my experience Makita is always worth the money
brilliant tool cuts very well and no mess no sparks
This little guy is a beast! It’s cut every piece of metal I’ve thrown at it and it still cuts like the day I got it!
Made cuts easy in 1/4″ plate with little sparks. Much better than trying to use a recip, angle grinder or portaband. Cuts were very crisp and clean.
Probably caught 70-80% of the metal cuttings in the “dust box”.
I used my Dewalt 5Ah battery with an adapter to use this.
Only issue I had was that the cuts went off perpendicular despite using a framing square. I chalk this up to user error as cutting plate steel takes longer and greater forces than wood allowing for the square to drift. I did clamp it but will use more or larger clamps in future.
The “dust box” lid catch did crack leaving it weak but I’m not sure how it happened. I think I will plastic weld it to repair it and try to be more careful opening it though I wonder how this will last in a real fabrication scenario as a opposed to my garage.
Other than that very happy for the price and best of all its cordless!
Das was sSie soll (Stahl und Alu bis 3mm)macht Sie hervorragend!…und der Auffangbehlter ist Super!
This thing is amazing! I love it! I’m a carpenter by trade and swear by makita tools! I believe I own almost every cordless tool they have made. This one impresses me day in and day out.
Great bit of kit for tin wall
Good cut
No splinters flying all over the place
Superb little saw for steel conduit and tray. If you’re doing a limited amount, it saves getting the big chop saw out of the va
LOVE IT! I could literally cut EMT conduit all day long with beast.
Cuts straight I can go and just the piece of steel I want and not have to haul the torches out or haul a big chunk of steel back to the shop.
The saw cuts extremely cleanly, and used with 4 and 5 Ah batteries I didn’t have to make as many charger trips as I expected. Much lower power consumption than making the same cuts with a grinder.
Difficult to follow lines, the groove and window on the guide doesn’t line up with the cut. You need your line to be about 2mm to the right of the groove, which is annoying and the swarf catcher obscures your view of the blade – would be better in clearer plastic.
Although it has depth setting, it has no mitre setting like you might find on a timber circular saw. This would be a very welcome addition.
Sliding blade guard gets caught from time to time. Could do with a handle to pull it back safely when required.
Over the course of a week I’ve learned to live with the above issues but they could be easily sorted by Makita. All that said it is still an excellent tool and I wouldn’t dream of sending it back as it’s much better than a grinder or jigsaw for ladder, tray, trunking and unistrut.
I’ve given this a four because it difficult to use because you can’t pull back the pivoting guard when in use it’s a pain but still a nice tool to use.
Brilliant little cutter used for Metal Tray,Trunking,Conduit
Collection box very effective
Must buy.