Makita PTR354DZ 12V Max Li-Ion CXT Pin Nailer – Batteries and Charger Not Included
Makita PTR354DZ
Please Note: Any accessories shown are not necessarily supplied as standard equipment.
Benefits:
- Sequential firing
- LED job light to illuminate the work area
- Magazine capacity 100 pieces
- Easy to see slim nose
The PTR354DZ drives 5 different lengths of 23 gauge pin nails, 15mm, 18mm, 25mm, 30,, and 35mm.
Features: Anti-dry fire mechanism, to prevent driving blanks and damaging the work surface.
PTR354DZ 12V Max Li-ion CXT Pin Nailer â No batteries included
The PTR354DZ is a cordless Pin Nailer, powered by 10.8V or 12V Li-ion CXT slide type battery (not included) for a high quality finish.
The nose tip is designed for better visibility, for quick and easy access to the desired firing point on the work piece, contact arm mechanism to enable continuous nailing and drag nailing and depth dial with tool-less depth adjustment for a precise flush and countersink finish.
The PTR354DZ has a trigger lock to prevent accidental start up, a spring loaded driving mechanism, and a window to check the amount of remaining nails.
Weight: | 2 kg |
Dimensions: | 40 x 10 x 35 cm; 2 Kilograms |
Model: | PT354DZ |
Part: | PT354DZ |
Colour: | Blue |
Pack Quantity: | 1 |
Batteries Required: | Yes |
Batteries Included: | No |
Manufacture: | Makita UK |
Colour: | Blue |
Quantity: | 1 |
Super easy to use ,rapid fire and lightweight another great product from makita .
Use it on skirting and arcs even though the pics are headess it holds them in place with a dovetail pattern of pins
Ein kleiner handlicher Nagler, der nur Ngel (genauer: Stifte), aber keine Klammern verschieen kann. Die Stifte sind 0,6 mm stark, haben keinen Kopf. Sie sind im Material fast nicht zu erkennen. Ich musste 100 Meter Fussbodenleiste an Rigips- Wnden befestigen. Das war mit dem Gert in Windeseile geschehen, der 4- Ampere- Akku war dabei zu 1/4 leer.
Die Stifte sind dabei in der fubodenleiste wirklich kaum zu erkennen, man muss schon ganz genau hinsehen. Das Arbeiten mit dem Gert macht wahnsinnigen Spa!
Ich habe die 25 mm langen Stifte verwendet, der Nagler hat berhaupt kein Problem, diese sowohl durch die MDF-Fubodenleiste als auch in den Rigips zu schieen.
Was ich toll fand: der Nagler lst nicht aus, wenn das Magazin leer ist.
Ein Nagel hat er sich tatschlich mal im Schusskanal verkeilt. Es war aber kein Problem, diesen mit einem kleinen Schraubenzieher zu entfernen. Das Magazin ist sehr gut erreichbar.
Alles in allem: ich bin mit dem Teil hoch zufrieden und wrde gerne weiter nageln! Hat noch jemand Fubodenleiste zu befestigen?
I’ve been using this pintacker for about 4 weeks and I guess around 10 times. I have used 25mm and 35mm pins. I works very well, loading the pins is very easy and using the machine is very straightforward. *Knocks on wood* – I haven’t had a single jam. After shooting about 150 pins over these 4 weeks, the battery still indicates that 4 out of 4 lights. I’m very happy with the tacker.