NZXT H710 – ATX Mid Tower PC Gaming Case – Front I/O USB Type-C Port – Quick-Release Tempered Glass Side Panel – Cable Management System – Water-Cooling Ready – Steel Construction – White/Black
H710
MID-TOWER ATX CASE
The mid-tower H710 and H710i ATX cases are a builder’s dream with plenty of space for almost any build. There are two 360mm radiator locations (top and front), seven 120/140mm fan mounts, a removable/repositionable 3+1 3.5” HDD cage, five 2.5” drive trays, and front USB 3.1 Gen 2 type-C for a truly epic system.
- Includes USB 3.1 Gen 2-compatability and USB-C connector.
- Everything builders loved in the original H Series alongside incredible updates.
- Cable-routing kit and pre-installed channels make wiring easy.
- Tempered glass side panel now installs with a single thumb screw.
- Clean, modern design with uninterrupted tempered glass.
| | | |
|---|---|---|
MORE MODERNWith a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC. | STILL BEAUTIFULThe clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build. | ENJOYABLE BUILDS FOR ALLCable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring. |
 |  |  | |
|---|---|---|---|
| Dimensions | W: 230mm H: 494mm D: 494mm (Without Feet) | W: 210mm H: 460mm D: 428mm (with feet) | W: 210mm H: 349mm D: 372mm (with feet) |
| Weight | 12.1 kg | 6.6kg | 5.9kg |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX and EATX (Up to 272mm or 10.7-inches) | Mini-ITX, Micro-ATX, ATX | Mini-ITX |
| I/O Ports | 1 x USB 3.1 Gen 2 Type-C 2 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack | 1 x USB 3.1 Gen 2 Type-C 1 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack | 1 x USB 3.1 Gen 1 Type-A 1 x USB 3.1 Gen 2 Type-C 1 x Headset Audio Jack |
| Filters | All Air Intakes | All Air Intakes | All Air Intakes |
| Expansion Slots | 7 | 7 | 2 |
| Drive Bays | 2.5”: 7 3.5”: 2+1 | 2.5”: 2+1 3.5”: 2+1 | 2.5”: 3+1 3.5”: 1 |
| Radiator Support | Front: 2 x 140 or 3 x 120mm with Push/Pull Top: 2 x 140 or 3 x 120mm Rear: 1 x 120mm | Front: 2 x 140 or 2 x 120mm with Pull Rear: 1 x 120mm | Front: 2 x 120 with Push/Pull Rear: 1 x 120mm |
| Fan Support | Front: 3 x 120/2 x 140mm (3 Aer F120 Case Version included) Top: 3 x 120/2 x 140mm Rear: 1 x 140 (1 Aer F140 Case Version included) | Front: 2 x 120/2 x 140mm (1 Aer F120 Case Version included) Top: 1 x 120/1 x 140mm Rear: 1 x 120 (1 Aer F 120 Case Version included) | Front: 2 x 120/2 x 140mm Top: 1 x 120mm (1 Aer F120 Case Version included) Rear: 1 x 120mm (1 Aer F120 Case Version included) |
| Dimensions: | 49.4 x 23 x 51.6 cm; 10 Grams |
| Model: | CA-H710B-W1 |
| Manufacture: | NZXT |
| Origin: | China |
Great PC Case with tiny flaws
It’s great PC Case, has tiny flaws though, like in front fans would choke the air, so it’s recommended not to use in front fans, you can however use it at the bottom and make it so it’s sucking air from the case rather then from outside, to reduce the heat, the top fan rattling the case and makes the noise, so it’s the default fans that comes with it makes this problem, but I contacted NZXT and they sent a new fan with rubber and it fixed the problem, it same happens at the bottom of the case for PSU, the PSU is rattling the case so you have to use a thick paper to hold the plastic cage so it doesn’t move, but other then that the case is good, not great, but good for it’s price, if you have a higher budget go for newer builds, or even H500i for improved things, but very sleek design, very nice, recommended overall for it’s price.
Great features, not a lot of airflow
It’s great for an at-home gaming system, has nice features for wire management and storage.
The airflow is lacking a little but I think there is a version with an open mesh front so If you’re running hot, don’t get this, get the other.
It looks dreamy and sits beautifully.
Great looking and easy to build i
Very easy to build in this case, cable ties were supplied to help with cable management. It has a premium feel to it and a front usb-c at this price point I think is great value.
It has two output fans installed as default and I believe relies on creating negative pressure to cool. It isn’t the best in class at this by any stretch but my temperatures have been fine using a 3700X with stock cooler and a 3070 Founders.
you know
look, you’re in the market for cool case, you might want to run multiple cards all custom cooled with RGB or perhaps you want a murder black rig that disappears, or maybe just have a subtle hint of colour in your very tidy cables.
You know NZXT make great cases, come on now, just get your card out, buy it, get on with your day. Easy life.
Best Case - Eve
This case is absolutely perfect. The quality and presentation is brilliant. A very well made product. Houses all my components perfectly and very easy to install. Definitely a case I will have for a very very long time!
Simple and Stylish
The case is fine and I have no real complaints once all assembled.
However, I did have pretty big issues with how overtightened the screws were in some areas, to the point of causing me to have issues with stripping one screw trying to remove i
Compact and Sturdy!
Pros:
– Compact: very manageable and easy to move.
– Stylish: minimalist design, modern and stunning glass side that makes all internal components visible, perfect for RGBfied and watercooled builds.
– Airflow: Perfect distribution of air thanks to the lovely design. Can accommodate enough fans for a heavy gaming build.
– Cable Management: Amazing cable management that keeps everything organized inside.
Cons:
Nothing!
Compact and Sturdy!
Pros:
– Compact: very manageable and easy to move.
– Stylish: minimalist design, modern and stunning glass side that makes all internal components visible, perfect for RGBfied and watercooled builds.
– Airflow: Perfect distribution of air thanks to the lovely design. Can accommodate enough fans for a heavy gaming build.
– Cable Management: Amazing cable management that keeps everything organized inside.
Cons:
Nothing!
Comes with a couple of fans that have coloured lights and room for more.
This is a good case with lots of channels for threading leads through. No slot for a DVD writer and I would have preferred space for an extra couple of small drives, but that is just my choice.
I also find the instant on/off a bit of a pain, the button is flush with the top of the case and the slightest touch can turn it off, I have put a plastic ring round it to stop that.
Room for lots of fans for cooling and it leaves the board easy to get at. In the whole except for a few small niggles this is a good case.
Easy cable management, high quality case
Super easy to build in, a fair amount of room to play with, and surprisingly good thermals on air cooling. Nothing more I could wish for. Built the pc for a relative and they haven’t had any complaints, and from my testing, I genuinely couldn’t find a flaw with it. A very solid choice for the price
Brilliant case!
I bought thus case purely because it looks great expecting the airflow and the assembly time to be not all that great, but after installing my hardware i have been having incredible temps. If you are building a mid-range pc this is the case for you but i would not recommend this case to someone getting a top of the range pc because there are not the best mounts if you wanted to water cool.
Very Solid
its a perfect case to build in, but not the greatest airflow, for me its perfectly fine though, so far very happy with the case, cable managing is too easy! zipties are included and you can reuse the twist ties that are meant to be thrown away, on the images attached im still waiting for my ram, ssd and psu extentions, in the psu shroud I have removed the hard drive cage because I wont be using it and the front panel i.o includes a usb 3.1 connection for the usb type c that my motherboard does have, If anyones interested im using a r3 1200,r9 280 until I can get a 1660, b450 steel legend, adata xpg rgb ram on its way , 256gb ssd and hopefully a 1tb ssd soon.
Good case
Excellent case and price…room for everything and my son loves it…perfect for a first time diy build
Beautiful case!
This case was great to build in. The easy to remove side panels are a great feature. Super happy with the looks and the only problem I’ve had is not being able to mount the AIO tubes down. This is a minor thing but would be nice to have the option.
Super job NZXT!
Decent case bit fiddly but looks great.
My top two USB ports don’t work hence the 4 stars. That doesn’t bother me too much though (not enough to kick up a fuss and get another one delivered to have to re-build my pc) and other than that it is a great case. The included fans really help with keeping things cool.
Well designed, adaptable
Present for grandson.
He’s delighted with it.
Customised it with lights and pop figures.
Worth it.
Perfect mini itx case, looks stylish and is fairly easy to build in, the only thing I’d recommend is if your changing out CPU or cooler at any point it’s recommended you disassemble the whole PC as it’s a very tight space to work with.
Great case. Value for money
This is a really aesthetically pleasing case, it was pretty hard to get out of the packaging so I had to sort of tear the box open on the side other than that it came in amazing condition no issues. The dust filter on the bottom for the PSU was pretty hard to put back in after I took it out other than that it’s an amazing case. airflow is ok for my system specs there is a nice amount ventilation on the front if you use it properly. I’m adding 2x 140 mm fans at the front and one 120 mom on the top as exhaust and one on the real which is also my cpu cooler.
pretty goof case for watercooling ONLY
Don’t buy unless you plan to use water-cooling. Other than that, a good solid case with an USB type C and a type A connector and a headphone jack
Simple and beautiful
Had this case for a few months now, wasn’t sure at the time of purchase if I was making the right decision as I was sacrificing my drive bays but with everything streaming these days, I hardly notice their absence anymore.
Also, I was aware of the issues in respect of airflow but i’m not pushing any heavy loads and I popped in a few Corsair Air Series fans so it’s ticking over nicely.
Of all the cases I’ve owned (so far) this one has hit the sweet spot: size, weight, layout, looks and hush. It’s a cracking case for work and moderate gaming in my opinion but i’m sure others have spent more on liquid cooling etc to keep temperatures down for more serious gaming.
easy to install i
first time putting pc together, was fairly simple, from the reviews it seems this may be due to how well the case is designed
Excellent size and looks
I have always wanted a compact case that does not compromise the performance. I have had Intel NUC’s but for the graphics card you want something bigger. I settled on NZXT Manta as it was one of most compact cases at the time without buying some no name brand after release of H1I was hooked on the idea which resonated will with my needs. And after putting it all together I can say this is as good as it gets – easy to put together and works well – bit most importantly looks cool and is super compact. I was happy to forfeit all the RGB fans and strips for this more conservative and stylish design.
Excellent size and looks
I have always wanted a compact case that does not compromise the performance. I have had Intel NUC’s but for the graphics card you want something bigger. I settled on NZXT Manta as it was one of most compact cases at the time without buying some no name brand after release of H1I was hooked on the idea which resonated will with my needs. And after putting it all together I can say this is as good as it gets – easy to put together and works well – bit most importantly looks cool and is super compact. I was happy to forfeit all the RGB fans and strips for this more conservative and stylish design.
Great budget case, however restricted airflow
The H510 is a great budget case for my sons first build, however over time with these parts and limited airflow things are going to get very hot, despite me purchasing extra fans the case and the parts still remained at very high temperatures
The Delivery Service
The delivery itself was very swift, appreciate that. However, the product itself has minor ‘damage.’ There is a part on the back that is bent, something I noticed.
Very Good buy! It says 'compact' but is actually very generous with space.
This case is beautiful. It is larger than I expected but for me, this is good, because I want a large mid-tower case for the new rig I am to build.
THE CASE – Well made, vibrant white colour, nice clicky sound on the on/off button, large pane of glass for viewing inside.
The delivery driver though just knocked and left immediately with my parcel on the doorstep in the rain, which bothered me somewhat but not enough for me to complain because I love the case!
Great case for building!
This case is so great to build in, lots of space for routing cables which allows for better airflow in the main section of the case. Separate area for hard drives and PSU to help with heat.
Personally prefer H710i, but would still give this 10/10
For the price, I’d strongly recommend the H710i instead. It’s a personal preference though as I much prefer the design. The pictures kind of hide how small this one is, and for some reason I’m just not settled with it. As it is though, I can’t fault it whatsoever in terms of function. If you genuinely want this design, it’s perfect. I was especially impressed with all the cable management options, and the customisation options! It supports SO many little things which I’d never have thought of, like how you can actually have the front fans, and attach a separate radiator which is a different size to them. The inside of the front panel supports lots of different sized fan/radiator options
Worth every penny!
I bought this case for my first build, which ridiculously took 36 years (prebuilts). It was certainly bigger than I expected for a mid ATX case but in fairness I was coming from an Alienware R5 which was half the size in comparison. Quality is superb and it was a delight to work with.
BEST EVER
This Case looks Dope, performs well, and plays its part when it comes to cable management with a simple yet effective management system, elegant design, and overall amazing build quality the H510 is a league of its own from my impressions it outperforms cases that exceed its price by hundreds.
Beautiful, classy case
This is a gorgeous looking case and makes your build look really classy. Very easy to build into too.
Looks good, works really well, great price.
I bought the H510 and would recommend it any one.
Apart from some issues trying to get the motherboard shield clicked in to place and getting some of the screws in when installing said motherboard, the assembly of my first PC build was very easy with this case. It looks really nice and functionally it works very well. The air flow is great, running MSFS 2020 for hours has my GPU at around 60 degrees c. Cable management is a breeze, there is a lot of different places to thread your cables through to keep them hidden and at the back there is some straps to hold some of the bigger cables in place. Having two stock fans coming with the case is a nice touch, you could get by with them but I easily added two extra fans up front.
I have been using this for a few weeks now and I’m really happy with it. With how good the case is and how well it works, it’s great value for money.
great case
easy to build, plenty of room i have a 410mm gpu so i mounted my 360mm x63 up top but i could of easily mounted it on the front as there is plenty of space, the cable management channels in the back work a treat only drama would be the hdd cage i took mine out as its not needed so im utilizing the space for a usb 2.0 hub and cables for a monitoring screen but 3 of the 4 screws that hold the cage where rounded so i had to drill them out apart from that one of the nicest and easiest cases i have ever built in and the smart hub with added rgb strips look good and make wiring up any additional rgb fans a breeze
Looks good, works really well, great price.
I bought the H510 and would recommend it any one.
Apart from some issues trying to get the motherboard shield clicked in to place and getting some of the screws in when installing said motherboard, the assembly of my first PC build was very easy with this case. It looks really nice and functionally it works very well. The air flow is great, running MSFS 2020 for hours has my GPU at around 60 degrees c. Cable management is a breeze, there is a lot of different places to thread your cables through to keep them hidden and at the back there is some straps to hold some of the bigger cables in place. Having two stock fans coming with the case is a nice touch, you could get by with them but I easily added two extra fans up front.
I have been using this for a few weeks now and I’m really happy with it. With how good the case is and how well it works, it’s great value for money.
Stylish well built functional case
I like the size of the case. It looks very stylish. Lots of cable management facilities. I did have to update CPU cooler from stock with four case fans installed.
Amazing PC Case
This case is insane. Never purchased a better PC Case, so easy to work in, lots of little cable management areas. All-round amazing.
Surprisingly good case for the money
It’s clearly been designed and built by people who have put some thought into how it will be used. It ha built in cable management and hides the ugly stuff so all you see is the motherboard presented. I have no regrets at this price point. The only negative experience I had was trying to remove some of the unnecessary motherboard mounts. They are tight and didn’t want to come out. It’s easy to scratch up the paint work trying to remove them.
It looks really nice though, I got a white monitor, with white keyboard and mouse. I still have loads of space left inside should I ever need to upgrade it in the future.
NZXT H510
Thought this case was going to be the be all and end all of PC Cases!
Making it look neat is very easy, there are all sorts of nooks and crannies to hide the messy cables, I thought I would need a modular supply for it but to be honest everything you don’t need just hides in the bottom PSU channel. The case itself is nice, looks neat and non threatening, the screw fastners on the panels are poor however, and I think if I open and close them much more they will break or the threads will strip, the metal isn’t as thick as the Corsair 88R it was replacing, I would go as far to say that the case is a little better build quality, but without the features.
Overall a nice case, easy to work in and hide cables, rough round a couple of the edges though.
NZXT H510
Thought this case was going to be the be all and end all of PC Cases!
Making it look neat is very easy, there are all sorts of nooks and crannies to hide the messy cables, I thought I would need a modular supply for it but to be honest everything you don’t need just hides in the bottom PSU channel. The case itself is nice, looks neat and non threatening, the screw fastners on the panels are poor however, and I think if I open and close them much more they will break or the threads will strip, the metal isn’t as thick as the Corsair 88R it was replacing, I would go as far to say that the case is a little better build quality, but without the features.
Overall a nice case, easy to work in and hide cables, rough round a couple of the edges though.
Amazing!
Bought this as I built my own pc. A great product for the price, great build quality, amazing cable management features and enough space for the longest graphics cards, easy to install fans, psu, motherboard and a nice selection of front IO. Amazing matte black finish for builders who are looking for a stealthy black design.
Good
Perfect itsept for that stupid light that flashes on the power button can easily avoid by not connecting the led connector but I found out after so I just cba to do that but other then that perfec
Really nice case
building my first pc i didn’t want to over spend on the case or underspend. I wanted something nice looking but not insanely flashy and unnecessary. I did some research on best brands and chose this when it arrived I was more than happy and once I’d finished building my pc the red / black looks really nice. It’s metal construction is nice and sturdy really really happy with it would recommend
Really nice case
building my first pc i didn’t want to over spend on the case or underspend. I wanted something nice looking but not insanely flashy and unnecessary. I did some research on best brands and chose this when it arrived I was more than happy and once I’d finished building my pc the red / black looks really nice. It’s metal construction is nice and sturdy really really happy with it would recommend
Good value, clean case, easy to build i
This is a good M-ITX case. The white/black configuration that I ordered makes for a very clean desktop setup, with it being small enough to have alongside my dual-monitor setup on my desk. The case comes with two included DC case fans set up as exhausts, as well as airflow filters on the front intake, as well as below the power supply intake. The front IO is good, with a single 3.5mm audio jack (splitter included in the box), a USB-C and a USB3.0. The tempered glass side panel allows for a good view of your rig, as well as insulates the noise too! This case is slightly bigger than most M-ITX cases, which makes it a doddle to build in. This case also provides good cable management solutions, as well as ample space to connect Sata devices!
This is a good case and I would recommend it to anyone who wants a mid-range case and is after a clean setup
Good value, clean case, easy to build i
This is a good M-ITX case. The white/black configuration that I ordered makes for a very clean desktop setup, with it being small enough to have alongside my dual-monitor setup on my desk. The case comes with two included DC case fans set up as exhausts, as well as airflow filters on the front intake, as well as below the power supply intake. The front IO is good, with a single 3.5mm audio jack (splitter included in the box), a USB-C and a USB3.0. The tempered glass side panel allows for a good view of your rig, as well as insulates the noise too! This case is slightly bigger than most M-ITX cases, which makes it a doddle to build in. This case also provides good cable management solutions, as well as ample space to connect Sata devices!
This is a good case and I would recommend it to anyone who wants a mid-range case and is after a clean setup
Great overall case, mine was unfortunately faulty
This is a great looking case with excellent cable management capabilities which made building my PC pretty simple. However the rear pre-installed fan stopped working after about a month. This is very cheap and easy to replace but still definitely worth keeping in mind.
My first ever build and the case was easy to build in and looks great! The only issue I had was when fitting my AIO radiator and fans to the front interior panel, this was quite tricky to get out and if you open it too far it will scratch the white metal strip inside the case! This happened to me and although it’s not too noticeable I can’t get the mark out and I know its’ there so I can’t stop seeing it!!
Amazing product overall highly recommend for any build big or small
This case is amazing it has a lot of space I have a very big gpu and a whole cooler master mounted in it and it closed fully no problem it has cable management sorted for you in the back this case will do you perfect for a clean build
he best case under 100 dollars right now!
his case is very minimalistic and sleek. its tempereed glass allows you to appreciate the inside of your pc and the cable managment allows easy assembly. would definitey recommend this case especially for such a good price
I would highly recommend.
There isn’t anything bad i can even say. the products arrive on time as usual, it does come in its original packaging that shows you what is in the box however this didn’t bother me. The case itself is easy to navigate and is amazing to build in with lots of room. The tempered class panel is amazing and I would recommend this case to anyone. The product also comes very well packed and nothing was damaged. Overall great quality and its just amazing.
Easily accessible parts, decent weight, comes with intake and exhaust fans
I purchased this case expecting to have to make a few adjustments… however, it was perfect! It came jnstalled with 9 motherboard stand-offs and a spare one in the box containing screws and more. It came with quite a few cable ties so cable managment won’t be an issue! It came with loadddssss of screws and its always good to have extra! My I/O shield slotted straight in without any issues and is very secure. To take off the front tempered glass panel, you simply unscrew the screw holding it in place (should be on one of the sides, its one that you can just twist with your hands) then all you have to do is pull the tab holding the tempered glass forward, with reasonable force, and then pull it upwards to unslot. I will note that you shouldn’t panic when pulling the tab I promise you the glass will almost definitely not shatter! The case also comes pre installed with power cables. Overall, this case is great and I would recommend spending thay extra 20 quid on it. P.S you may need to uninstall a standoff or two depending how many standoff holes your motherboard has, so the motherboard just slots into place and you don’t damage it. Dont get rid of spare stand offs, as you may want to replace your motherboard or use the case for another rig at some point!
Easily accessible parts, decent weight, comes with intake and exhaust fans
I purchased this case expecting to have to make a few adjustments… however, it was perfect! It came jnstalled with 9 motherboard stand-offs and a spare one in the box containing screws and more. It came with quite a few cable ties so cable managment won’t be an issue! It came with loadddssss of screws and its always good to have extra! My I/O shield slotted straight in without any issues and is very secure. To take off the front tempered glass panel, you simply unscrew the screw holding it in place (should be on one of the sides, its one that you can just twist with your hands) then all you have to do is pull the tab holding the tempered glass forward, with reasonable force, and then pull it upwards to unslot. I will note that you shouldn’t panic when pulling the tab I promise you the glass will almost definitely not shatter! The case also comes pre installed with power cables. Overall, this case is great and I would recommend spending thay extra 20 quid on it. P.S you may need to uninstall a standoff or two depending how many standoff holes your motherboard has, so the motherboard just slots into place and you don’t damage it. Dont get rid of spare stand offs, as you may want to replace your motherboard or use the case for another rig at some point!
Its a solid case, my first build.
So this is my first build and using it for about a month it has been good. It has been really easy to build in with the cable mangement being really good and it being a nice looking case along with the front usb c header which is a nice extra as my motherboard does support usb type c header. The 3.5 headphone jack is good as you can use your everyday usual headphones/earphones which is awesome rather than having to use a seperate earphone and microphone jack, they do include a splitter if you happen to have that type of headset/headphone. The case has alright fans, they do the job but can get a tiny bit loud, the top fan was louder than the rear fan, I replaced them with bequiet fans. I dont have a AIO but you use one in this case. The negatives I have found is that the screws for mainly the back panel is degraded in quality and when taking off the back panel and trying to install them the screw is now a bit annoying to put into the case as they dont go in smoothly and they can not go straight in but rather wonky and then you have to use a bit of force when using your thumbs and the screws have degraded in quality to with them chipping off but they still work. The front panel isnt as bad but the scew has degraded in quality too. The warmth in this case is fine but nothing spectacular, I have heard from other people that it isn’t the best airflow but the warmth is fine to be honest and isn’t anything to take on board, I’m just mentioning that but to be honest I might be wrong. Overall it is a good case and you won’t be disappointed, also I’d recommend going with the non-i cases as you can save money and the rgb lighting and extra features aren’t really worth it but if you can find a good offer or you have the money and want RGB go for it, I was going to buy the i series but than I saw I could save a bit of money with going with the non i version. Also the paint scuffs of very easily near screw areas and it exposes the metal so paint quality is a bit meh but it would scuff off any other areas.
Its a solid case, my first build.
So this is my first build and using it for about a month it has been good. It has been really easy to build in with the cable mangement being really good and it being a nice looking case along with the front usb c header which is a nice extra as my motherboard does support usb type c header. The 3.5 headphone jack is good as you can use your everyday usual headphones/earphones which is awesome rather than having to use a seperate earphone and microphone jack, they do include a splitter if you happen to have that type of headset/headphone. The case has alright fans, they do the job but can get a tiny bit loud, the top fan was louder than the rear fan, I replaced them with bequiet fans. I dont have a AIO but you use one in this case. The negatives I have found is that the screws for mainly the back panel is degraded in quality and when taking off the back panel and trying to install them the screw is now a bit annoying to put into the case as they dont go in smoothly and they can not go straight in but rather wonky and then you have to use a bit of force when using your thumbs and the screws have degraded in quality to with them chipping off but they still work. The front panel isnt as bad but the scew has degraded in quality too. The warmth in this case is fine but nothing spectacular, I have heard from other people that it isn’t the best airflow but the warmth is fine to be honest and isn’t anything to take on board, I’m just mentioning that but to be honest I might be wrong. Overall it is a good case and you won’t be disappointed, also I’d recommend going with the non-i cases as you can save money and the rgb lighting and extra features aren’t really worth it but if you can find a good offer or you have the money and want RGB go for it, I was going to buy the i series but than I saw I could save a bit of money with going with the non i version. Also the paint scuffs of very easily near screw areas and it exposes the metal so paint quality is a bit meh but it would scuff off any other areas.
Nice case but one issue
Really nice case simple to build in but the motherboard stand offs where what seemed like welded in so had to use pliars to remove then into suitable place for my board which led to surface scratches on the case other than that looks really nice
Quality doesn’t quite match cost.
Nice case with good cable routing but it’s not a quality a build as I was expecting for the price; cheap and nasty HDD cage, uneven panel alignment and lots of non tool less screws. Also note that unlike it appears in lots of inline web and YouTube reviews it does not come with a rear RGB fan (but did come with 2 RGB front fans and 2 non RGB fans for rear vent and top panel.
Quality doesn’t quite match cost.
Nice case with good cable routing but it’s not a quality a build as I was expecting for the price; cheap and nasty HDD cage, uneven panel alignment and lots of non tool less screws. Also note that unlike it appears in lots of inline web and YouTube reviews it does not come with a rear RGB fan (but did come with 2 RGB front fans and 2 non RGB fans for rear vent and top panel.
Amazingly high-quality case. Highly recommended.
I’ve built about 50 PCs this year, and I tend to build with much lower priced cases – and I’m very happy with what I’ve built. However, when I purchased this case, it opened my eyes to cases in this price range. Everything is just much better put together. The grade of metal feels a tiny bit thicker, with everything securing squarely and using captive screws for convenience.
There’s tons of space inside this to put the largest motherboard and a 240mm radiator at the front. There are two supplied, black 120mm fans at the top and rear of the case. The top fan mount can take up to a 140mm fan, and I replaced both of my fans for white Artic models (which are bit tiny bit louder than the supplied NZXT ones).
Cooling is okay. There’s a vent in the front right, where you can either intake or exhaust from the front radiator fans and this appears to work okay, even though it’s a bit indirect from the fans, but it appears to work pretty well.
In summary, this is a very high quality case that I would recommend to anyone. I was so inspired by this case, I bought the smaller nzxt H200 for another build after this. It’s a lovely, luxury case.
Amazingly high-quality case. Highly recommended.
I’ve built about 50 PCs this year, and I tend to build with much lower priced cases – and I’m very happy with what I’ve built. However, when I purchased this case, it opened my eyes to cases in this price range. Everything is just much better put together. The grade of metal feels a tiny bit thicker, with everything securing squarely and using captive screws for convenience.
There’s tons of space inside this to put the largest motherboard and a 240mm radiator at the front. There are two supplied, black 120mm fans at the top and rear of the case. The top fan mount can take up to a 140mm fan, and I replaced both of my fans for white Artic models (which are bit tiny bit louder than the supplied NZXT ones).
Cooling is okay. There’s a vent in the front right, where you can either intake or exhaust from the front radiator fans and this appears to work okay, even though it’s a bit indirect from the fans, but it appears to work pretty well.
In summary, this is a very high quality case that I would recommend to anyone. I was so inspired by this case, I bought the smaller nzxt H200 for another build after this. It’s a lovely, luxury case.
Got what I expected
It’s a great sized case that makes it easy to fit in components and arrange wires. Build quality is excellent. With all the parts fitted inside, it’s built like a tank. I’ve hit my knee off of it twice in the middle of the night and it did a lot more damage to me than I did to the case.
ice case, my thermals and specs inc
Well just built my first PC since 2002. Nice case to build in. Read a few reviews and youtube videos about NZXT and there love of over tightening screws. Yeah that is true. Apart from that it is well built and suited my budget and the asthetics that I was going for.
Would recommend. Oh airflow. Right.
AMD 3600 with stock cooler and using AMD master for a auto overclock.
Zotac GTX 1660 super OC’d with MSI afterburner 105% power max temp set to 85c core 115% MC +850 fan auto.
Using a MSI B550m morter, be quiet SP 9 600w.
Results in a max cpu during 3d mark time spy of 92c
Gpu 85c and a score of 6520 (graphics 6437 cpu 7038)
That was with the stock negative pressure set up with no intake and 2 exhaust (back and top)
Idle temps Cpu 37c gpu 32c room temp 23c
ice case, my thermals and specs inc
Well just built my first PC since 2002. Nice case to build in. Read a few reviews and youtube videos about NZXT and there love of over tightening screws. Yeah that is true. Apart from that it is well built and suited my budget and the asthetics that I was going for.
Would recommend. Oh airflow. Right.
AMD 3600 with stock cooler and using AMD master for a auto overclock.
Zotac GTX 1660 super OC’d with MSI afterburner 105% power max temp set to 85c core 115% MC +850 fan auto.
Using a MSI B550m morter, be quiet SP 9 600w.
Results in a max cpu during 3d mark time spy of 92c
Gpu 85c and a score of 6520 (graphics 6437 cpu 7038)
That was with the stock negative pressure set up with no intake and 2 exhaust (back and top)
Idle temps Cpu 37c gpu 32c room temp 23c
No problems
Only thing to remember is to get an additional 2 120mm intake fans for the front, as negetive air flow is built in by default. Unless you move one of the fans to the front, however still not as good as 4 fans.
It's awesome tower.
First time I build my own gaming PC, I would definitely recommend this tower. Looks great, easy to install your motherboard and fans, graphics card. It hide the wires away really great.
I love this case...
It is so easy to build in this case. The build looks very clean thanks to the cover of the bottom part of the case. Cable management is a dream. Opening side panels never were easier for me and you never lose the screw because all screws on side panels are captive. installation of the SFX power supply is as easy as unscrewing the mounting bracket, screwing PSU to the mounting bracket and screwing it all to the case with nothing on your way. The interior is spacious yet the case itself is compact and light.
Great mid-tower case that justifies its price
Here is a list of pros and cons that I found when building this PC:
Pros:
Well packaged
Looks clean and well built
Lots of room for different cooling options.
Easily removable tempered glass panel
One button to remove back panel
Cable management is easy with the built in cable routing.
Cable management bar does a good job covering the cables up – can be removed or moved over slightly.
Comes with 4 good quality fans and a fan splitter
Good front panel i/o
Airflow is great
Cons:
Cable management bar was obtrusive – had to bend 24pin and front panel USB 3.1 cable at a tight angle even when I moved it over – this shouldn’t be a problem if you use a Micro-ATX motherboard and it may not be an issue with other ATX motherboards.
The front and top panel can be difficult to remove and require a good amount of force – depending on how often you will remove these panels, the likelihood of the plastic clips breaking is low.
In conclusion this is an good-looking case with a strong build quality to match it’s price. I intended to buy the Cooler Master 500p mesh for its great air flow but I went with this case instead because it offers good airflow and for me personally I like the aesthetics of it.
Great mid-tower case that justifies its price
Here is a list of pros and cons that I found when building this PC:
Pros:
Well packaged
Looks clean and well built
Lots of room for different cooling options.
Easily removable tempered glass panel
One button to remove back panel
Cable management is easy with the built in cable routing.
Cable management bar does a good job covering the cables up – can be removed or moved over slightly.
Comes with 4 good quality fans and a fan splitter
Good front panel i/o
Airflow is great
Cons:
Cable management bar was obtrusive – had to bend 24pin and front panel USB 3.1 cable at a tight angle even when I moved it over – this shouldn’t be a problem if you use a Micro-ATX motherboard and it may not be an issue with other ATX motherboards.
The front and top panel can be difficult to remove and require a good amount of force – depending on how often you will remove these panels, the likelihood of the plastic clips breaking is low.
In conclusion this is an good-looking case with a strong build quality to match it’s price. I intended to buy the Cooler Master 500p mesh for its great air flow but I went with this case instead because it offers good airflow and for me personally I like the aesthetics of it.
brilliant case!
his case is amazing! the cable management is so easy and the pc looks so good. i had never made a pc before so i was a bit worried about how well i would be able to make the pc but i did it effortlessly in two hours in this case. I added two extra fans to the front and the airflow is amazing, i am yet to properly game on it but at idle temp the graphics card (a 1660 super) is at around 40.c my ssds are at 25.c the motherboard (the msi b450 gaming max plus) is consistently at 26.c and the cpu (RYZEN 5 3600) is at 39.c (these results are from the speccy app and the msi dragon centre app.)
Much Bette
UPDATED REVIEW
Its a beautiful case thats easy to build in and comes with steller cable routing slots. At the current price point it’s hard not to recommend.
========================================================================================
OLD REVIEW
The chassis was warped and unusable upon arrival, I have requested a replacement and will update the review if the new case arrives intact.
Expensive but worth every penny.
NZXT has to be the best brand for computer cases, although this case is pretty expensive, I have zero regrets upgrading to it, not only is it aesthetically great, but it has drastically improved the airflow in my build and also keeps me future ready if I want to upgrade my graphics card to one that’s slightly bigger.
Fantastic ITX Case
Really loved building in this case. So many little design choices made that make things easier. Easy access to everything and no problems building an ITX board as plenty of hand space. Look and feel of the case is top quality too.
Only disappointment for me was the USB C port. very few AMD ITX boards support a front panel usb C (at a reasonable price) so it’s just been left disconnected for now. Would have preferred a second USB 3 at the front instead but that’s literally the only complaint I have. Excellent case.
Compact simple appearance
It is nice design well built let down by cheap USB connector which got stuck in Mobo. Had to return first case. This one got better cable but screws been over tighten and grab screws falling out of holes. Jeez can’t get perfect all
Anyway it’s not all negative. Everything else is positive, case is smart with plenty of space to hide the cables. I managed to fit in there msi b450i with 3700x with noctua d15 heatsink. To do that you need to remove fans included and install 15mm versions, motherboard without heatsink first and plug all the cables at the top, then rear fan, then heatsink followed by mod fan(very little space to put fingers there. Then plug all connector on right side, install second heatsink fan and then another 15mm top fan. It’s pretty much no gap installation. Used all noctua fans, CPU idle is 38 degrees and doesn’t go over 66.
Compact simple appearance
It is nice design well built let down by cheap USB connector which got stuck in Mobo. Had to return first case. This one got better cable but screws been over tighten and grab screws falling out of holes. Jeez can’t get perfect all
Anyway it’s not all negative. Everything else is positive, case is smart with plenty of space to hide the cables. I managed to fit in there msi b450i with 3700x with noctua d15 heatsink. To do that you need to remove fans included and install 15mm versions, motherboard without heatsink first and plug all the cables at the top, then rear fan, then heatsink followed by mod fan(very little space to put fingers there. Then plug all connector on right side, install second heatsink fan and then another 15mm top fan. It’s pretty much no gap installation. Used all noctua fans, CPU idle is 38 degrees and doesn’t go over 66.
Good case, easy to build. Larger components can be a squeeze
Great little case to build in. However if you’ve got a full size ATX board and a large graphics card (310mm) it can be a bit if a squeeze. Cable management is good, but again if your using cable extensions for braided cables it makes tucking your cables in a bit of a squeeze.
good case for price
plenty of room maybe a bit tinny for some. screws in back can be a pain very fiddly constantly trying to line up and screw in easy
I just love it.....slick design.
Wow what a beautiful case! Looks absolutely amazing. There are a couple of cons with this case from lower air flow than some mesh units out there, but if you install good corsair rgb fans then thermals are fair….I remember I had a computer with hardly any slots for airflow but I guess cpu and gpu pump alot more heat than a zx spectrum. Also dont touch your case, as you will be seeing fingerprints all over it…but I can tell if the kids have touched it! I would remove the smart device and not actually buy the I-version as it’s just not worth that extra money. States on alot of reviews that it has only two mechanical drive bays but it actually holds 3 as one can be attached on top of the drive caddy.
She's a beaut.
Was looking to upgrade from an old case with basically no airflow, and after some research landed here.
In photos this case looked good, and in youtube builds the cable management was good. So I bought it and it was just as good as everyone said.
Transplanting the components from my old case was a breeze, with cable management made so easy and everything you’d need provided in the box.
I was still questioning airflow however, as there was just a gap to the front right of the case where air would be pulled through, and two case fans set up as exhausts out the box (negative pressure configuration). I decided to experiment with fans, bought two extra ones to see if fans forcing the air from the front slit would be better than relying on negative pressure.
Findings were interesting, CPU temps barely changed between configurations (1-2deg cooler under load with front fans ), but GPU was a few degs hotter under load with front fans installed – this was because without front fans, negative pressure casues air to be pulled from wherever there is a gap, and cool air was being pulled through the PCIE slots onto the GPU, and sucked in by the GPU fans… Y’all NZXT people are smart.
One trade-off to neg pressure is dust, and the only dust filter is under PSU and on the intake slit at the front of case, PCIE slots will let in dust. If that’s cool with you and you want to save a few bucks on fans, stick to the default configuration.
I know 90% of this review is about fans but there really is nothing negative to say about this case. Will be sticking by NZXT for a long while.
She's a beaut.
Was looking to upgrade from an old case with basically no airflow, and after some research landed here.
In photos this case looked good, and in youtube builds the cable management was good. So I bought it and it was just as good as everyone said.
Transplanting the components from my old case was a breeze, with cable management made so easy and everything you’d need provided in the box.
I was still questioning airflow however, as there was just a gap to the front right of the case where air would be pulled through, and two case fans set up as exhausts out the box (negative pressure configuration). I decided to experiment with fans, bought two extra ones to see if fans forcing the air from the front slit would be better than relying on negative pressure.
Findings were interesting, CPU temps barely changed between configurations (1-2deg cooler under load with front fans ), but GPU was a few degs hotter under load with front fans installed – this was because without front fans, negative pressure casues air to be pulled from wherever there is a gap, and cool air was being pulled through the PCIE slots onto the GPU, and sucked in by the GPU fans… Y’all NZXT people are smart.
One trade-off to neg pressure is dust, and the only dust filter is under PSU and on the intake slit at the front of case, PCIE slots will let in dust. If that’s cool with you and you want to save a few bucks on fans, stick to the default configuration.
I know 90% of this review is about fans but there really is nothing negative to say about this case. Will be sticking by NZXT for a long while.
Great case but many of the screws were over tightened.
The case is good looking and well thought out with relatively convenient cable routing, the only downside is many of the screws were over tightened. I had to move the wire cover (the white bar) to allow room for a cable to my motherboard and one of the screws attaching the wire cover to the case wouldn’t budge.
Awesome
Great case would buy again.
Airflows great easy to install everything.
Great looking.
Good value.
If your thinking of buying stop thinking and buy.
Compact and Bijou
When upgrading an old machine turns in to building a new PC!! Was after a cheapish, white, windowed case and this seemed to fit the bill. I remember looking at the bigger sibling when I built my last machine and thinking it looked good. This case does look nice and is quite compact. Fits on top of a desk well, to make the most of using the glass side.
Although it’s not that much smaller, dimensions-wise to my main PC chassis which is a Phanteks Pro M it just seems it. The components sit much closer to the glass than on the Phanteks – on that one you can fit a 140mm fan at the rear but on the NZXT you’re stuck with a 120mm. Also, the glass panel doesn’t go from top to bottom and I think that makes it seem a bit smaller compared to the Phanteks as the whole side is glass and it just makes it look more ‘airy’.
Because of the size, I did find it a little bit more fiddly to work in but that’s probably due to my large sausage fingers. In these days where the number of components used is a lot smaller than in the old days where USB cards, sound cards, mechanical disks were the norm, this isn’t really a problem. Even with a non-modular PSU there’s plenty of space under the PSU shroud to hide away all the unused cables, and the metal side panel has enough space between it and the chassis to thread your wiring pretty easily. There’s an SSD mount as well on that side to keep your SSD out of sight. The cage/mounting for 3.5″ disks isn’t that great though as to get disks in it looks like you’d have to pop the PSU out as the disks go in aligned from front to back rather than side to side.
Some of the thumbscrews occasionally need a screwdriver to loosen but generally work well. Not having a full length glass side means it is very easy to remove it – unscrew thumbscrew and then just pull the top back and lift out – much less chance of damaging it than with some cases. The removable front fan/radiator bracket is a winner and makes fitting either a lot easier.
Case comes with two 120mm NZXT fans which are OK. I have replaced the top one with a 140mm fan as the machined grill is that size so it just seems to make sense to put one there. Why NZXT only used a 120mm must be purely down to saving a few pennies. There’s only one button – on/off and a single USB A and C port on the top – an extra A type would have been useful but it’s nice having the C there.
Think that’s it really. It’s a nice case. Not quite as solid as the Phanteks but seems well made – everything is screwed, no pop-outs. It’s light, compact, and looks good. Air flow seems OK but I think increasing the top fan to 140mm has helped shift a bit more heat out. I tried adding a fan or two at the front but this didn’t do much so removed again – the case is designed to work using negative pressure and that does seem to be the best way to play it.
Compact and Bijou
When upgrading an old machine turns in to building a new PC!! Was after a cheapish, white, windowed case and this seemed to fit the bill. I remember looking at the bigger sibling when I built my last machine and thinking it looked good. This case does look nice and is quite compact. Fits on top of a desk well, to make the most of using the glass side.
Although it’s not that much smaller, dimensions-wise to my main PC chassis which is a Phanteks Pro M it just seems it. The components sit much closer to the glass than on the Phanteks – on that one you can fit a 140mm fan at the rear but on the NZXT you’re stuck with a 120mm. Also, the glass panel doesn’t go from top to bottom and I think that makes it seem a bit smaller compared to the Phanteks as the whole side is glass and it just makes it look more ‘airy’.
Because of the size, I did find it a little bit more fiddly to work in but that’s probably due to my large sausage fingers. In these days where the number of components used is a lot smaller than in the old days where USB cards, sound cards, mechanical disks were the norm, this isn’t really a problem. Even with a non-modular PSU there’s plenty of space under the PSU shroud to hide away all the unused cables, and the metal side panel has enough space between it and the chassis to thread your wiring pretty easily. There’s an SSD mount as well on that side to keep your SSD out of sight. The cage/mounting for 3.5″ disks isn’t that great though as to get disks in it looks like you’d have to pop the PSU out as the disks go in aligned from front to back rather than side to side.
Some of the thumbscrews occasionally need a screwdriver to loosen but generally work well. Not having a full length glass side means it is very easy to remove it – unscrew thumbscrew and then just pull the top back and lift out – much less chance of damaging it than with some cases. The removable front fan/radiator bracket is a winner and makes fitting either a lot easier.
Case comes with two 120mm NZXT fans which are OK. I have replaced the top one with a 140mm fan as the machined grill is that size so it just seems to make sense to put one there. Why NZXT only used a 120mm must be purely down to saving a few pennies. There’s only one button – on/off and a single USB A and C port on the top – an extra A type would have been useful but it’s nice having the C there.
Think that’s it really. It’s a nice case. Not quite as solid as the Phanteks but seems well made – everything is screwed, no pop-outs. It’s light, compact, and looks good. Air flow seems OK but I think increasing the top fan to 140mm has helped shift a bit more heat out. I tried adding a fan or two at the front but this didn’t do much so removed again – the case is designed to work using negative pressure and that does seem to be the best way to play it.
Great compact case - easy to build into
This is a really easy case to build into. This was my first PC build. The compact form factor is great. The case looks great too. Price was also attractive.
Dream Case
Cannot give this case enough praise. The H510 is absolutely stunning and such an easy case to build in. Not only is the build quality solid but cable management is made a breeze.
Personally I think the case looks amazing and works really well with colour themed builds. You absolutely cannot go wrong with this case.
Beautiful and feature case with only a couple of minor flaws
I’m really pleased with this case. It looks great, is quiet and was very easy (even with my crappy stock PSU cables) to build very tidily!
There any many clever little innovations like the channels with Velcro straps for cable routing, little plastic clips for SSDs, etc.
The only negatives are:
Manual is like Ikea instructions, pictures only. Fine if you know what you’re doing.
The caddy for conventional Hard disks requires removal to install drives which requires the case to be on its side to remove. Also, there is zero clearance so the bottom slot is useless for most power connectors. The same is true if you attach a drive directly to the bottom of the case, no clearance so impossible. Luckily I only had 1 to install so I moved it higher, bit this seems like an unnecessary failure. If I was NZXT I would have the caddy take little plastic mounts that can be screwed to the side of the disks, then drives can be added/removed without removing the whole thing.
There is no way to route cables from the radiator tray on top without going round the ends of the radiator. In my case the fans in a pull configuration were too short to reach the fan header because of this, i had to use an extender. Given how good cable routing is in general, it would have been nice to see a way to route the cables from the radiator tray straight down into the back of the case.
Otherwise it’s fantastic. Looks amazing, quite and I’ve had no problems with cooling (initially i was worried about this because of the solid front/top of the case).
Kinda wish I’d got the 710i for the eye-candy, but I know that after 2 weeks I wont care about flashy lights so in the long-term, the right decisions!
Beautiful and feature case with only a couple of minor flaws
I’m really pleased with this case. It looks great, is quiet and was very easy (even with my crappy stock PSU cables) to build very tidily!
There any many clever little innovations like the channels with Velcro straps for cable routing, little plastic clips for SSDs, etc.
The only negatives are:
Manual is like Ikea instructions, pictures only. Fine if you know what you’re doing.
The caddy for conventional Hard disks requires removal to install drives which requires the case to be on its side to remove. Also, there is zero clearance so the bottom slot is useless for most power connectors. The same is true if you attach a drive directly to the bottom of the case, no clearance so impossible. Luckily I only had 1 to install so I moved it higher, bit this seems like an unnecessary failure. If I was NZXT I would have the caddy take little plastic mounts that can be screwed to the side of the disks, then drives can be added/removed without removing the whole thing.
There is no way to route cables from the radiator tray on top without going round the ends of the radiator. In my case the fans in a pull configuration were too short to reach the fan header because of this, i had to use an extender. Given how good cable routing is in general, it would have been nice to see a way to route the cables from the radiator tray straight down into the back of the case.
Otherwise it’s fantastic. Looks amazing, quite and I’ve had no problems with cooling (initially i was worried about this because of the solid front/top of the case).
Kinda wish I’d got the 710i for the eye-candy, but I know that after 2 weeks I wont care about flashy lights so in the long-term, the right decisions!
Mostly great.
Great case with a logical layout. Easy to make a clean build with plenty of room at the rear for cabling.
Looses a star as i think its a slight downgrade of the older s304 which had better front airflow and filters.
Some of the screws are on so tightly that you need good screwdrivers otherwise there is a chance of stripping the head.
Overall its a great case, especially if you get a discount.
Amazing Case but Didn't Arrive in Perfect Conditio
I could rant on and on about how amazing the construction and design of this case is (It is!), however there are plenty of reviews talking about that. Instead I want to explain why I knocked a star off my rating. The case arrived with a giant gash in the cardboard box. For relatively high priced case I was disappointed to see the only padding in the box is on the ends. Upon opening the box I discovered the paint had been scraped off in some spots. It’s the sort of thing someone else would never notice but when it’s your own computer and the case is supposed to be brand new it’s a bit of a bummer. At this point it’s not worth it to me to send it back but if NZXT is reading this please consider adding additional packing material.
Amazing Case but Didn't Arrive in Perfect Conditio
I could rant on and on about how amazing the construction and design of this case is (It is!), however there are plenty of reviews talking about that. Instead I want to explain why I knocked a star off my rating. The case arrived with a giant gash in the cardboard box. For relatively high priced case I was disappointed to see the only padding in the box is on the ends. Upon opening the box I discovered the paint had been scraped off in some spots. It’s the sort of thing someone else would never notice but when it’s your own computer and the case is supposed to be brand new it’s a bit of a bummer. At this point it’s not worth it to me to send it back but if NZXT is reading this please consider adding additional packing material.
A brilliant case for my first ever pc build
My specs:
Ryzen 7 3800x
Rtx 2070 super
x570 aorus elite motherboard
Crucial ballistix 3600mhz 16gb ddr4
Corsair h100i RGB platinum aio cooler
Corsair TX750M PSU
1x500GB ssd, 1x2tb ssd
This case was amazing for my first build. I’d never built a pc before, so it was a nice addition that 2 fans were already installed, and that the initial cable management was great with loads of hooks for cable ties. It’s a compact ATX case, so everything fits very snugly. Even my rtx 2070 super, which is a damn big card, fits in nicely with room for my aio to breathe. I love the minimalistic design, and the PSU shroud helps to hide all your unneeded cables, so the inside of your case isn’t messy, and takes advantage of the nice tempered glass side panel.
Temperatures are pretty good. My GPU is the hottest thing in my system, reaching about 71 degrees under full load, and both my CPU and GPU idle at about 30-50 degrees.
Overall a great looking case with no wasted space. Super easy to build in, and the manual explains nicely how things like the hard drive tray come out, and what acrews to use.
Super user friendly
A brilliant case for my first ever pc build
My specs:
Ryzen 7 3800x
Rtx 2070 super
x570 aorus elite motherboard
Crucial ballistix 3600mhz 16gb ddr4
Corsair h100i RGB platinum aio cooler
Corsair TX750M PSU
1x500GB ssd, 1x2tb ssd
This case was amazing for my first build. I’d never built a pc before, so it was a nice addition that 2 fans were already installed, and that the initial cable management was great with loads of hooks for cable ties. It’s a compact ATX case, so everything fits very snugly. Even my rtx 2070 super, which is a damn big card, fits in nicely with room for my aio to breathe. I love the minimalistic design, and the PSU shroud helps to hide all your unneeded cables, so the inside of your case isn’t messy, and takes advantage of the nice tempered glass side panel.
Temperatures are pretty good. My GPU is the hottest thing in my system, reaching about 71 degrees under full load, and both my CPU and GPU idle at about 30-50 degrees.
Overall a great looking case with no wasted space. Super easy to build in, and the manual explains nicely how things like the hard drive tray come out, and what acrews to use.
Super user friendly
Best NZXT case and it really is worth the money
I absolutely love this case. It has everything for modern builds. All the cables are already routed for you, the standoffs are pre-installed etc. There’s an accessory box in the basement of the case that has all the screws you’d need. As I did struggle to know which screws to use for the Motherboard, you wanna use the screws from the pack that has 21 little screws in it. I can’t remember the size, but if there’s 21 in the pack then those are the ones you wanna use. They can also be used for installing HDD’s too. Comes with all four fans too. Great buy! 🙂
An Outstanding PC Case!!
Bought this to build my first PC in. It was even better than expected.
Pro’s:
Very well built
Looks fantastic
Excellent rubber grips on the bottom keeping it planted
Great cable management
A few dust filters included and installed to help keep it clean
Good airflow with just the 2 exhaust fans it comes with
The 2 fans are very quiet in my experience so far
Comes with all the necessary screws and motherboard standoffs you need already installed
Good value for money at only 70 too.
Con’s:
Installing the motherboard was a bit fiddly due to the compact size but to be honest that’s just me being hyper critical. I assume this is the same for almost every case though anyway.
I Would very highly recommend this case to anyone wanting to build a PC.
Brilliant Case
The pictures do not do this case justice it is huge in comparison to most cases but im looking forward to seeing my 2080 super fit in without issue when my mother board arrives.
One of the cleanest ITX cases I have ever built i
This is as my title says “One of the cleanest ITX cases I have ever built in” and that is no joke!
The layout and design of this cases make it very easy to make any build look clean and professional inside, with a little planning and fore-thought you can make a dull build look superb inside just buy routing your cables properly inside.
Well I have only one issue to advise of with the NZXT H210 case, and that is with the removal of the Tempered Glass side panel. When you go to remove is you will have to undo a thumb screw, then lift a metal away from the back of the case. Then using the Tab you will have to pull the top of the glass out of the case, which is a real pain because it is located by two very stiff location lugs that hold it in place very firmly. Feels like you might break the glass trying to get the panel off, but you won’t it is very well made.
That being said if i have to build another ITX machine for friends or family I would advise that one of these is used where possible.
Thank you NZXT for making such a lovely ITX case to build in.
One of the cleanest ITX cases I have ever built i
This is as my title says “One of the cleanest ITX cases I have ever built in” and that is no joke!
The layout and design of this cases make it very easy to make any build look clean and professional inside, with a little planning and fore-thought you can make a dull build look superb inside just buy routing your cables properly inside.
Well I have only one issue to advise of with the NZXT H210 case, and that is with the removal of the Tempered Glass side panel. When you go to remove is you will have to undo a thumb screw, then lift a metal away from the back of the case. Then using the Tab you will have to pull the top of the glass out of the case, which is a real pain because it is located by two very stiff location lugs that hold it in place very firmly. Feels like you might break the glass trying to get the panel off, but you won’t it is very well made.
That being said if i have to build another ITX machine for friends or family I would advise that one of these is used where possible.
Thank you NZXT for making such a lovely ITX case to build in.
Amazing case to build in, clean and neat!
Just got the H510 a few days ago and LOVE LOVE LOVE IT! It’s so easy to build in and the result is a clean and neat built. I was worried about getting a white case as I’ve always just stuck to getting black ones but having it built and looking at it, it’s so plain and clean that I just love it! Worth the money and time of rebuilding or building for the first time 🙂
Smart case, minimal with all the features you need.
Great case, only 2 fans buy extra bcus their cheap…
Only downside is the accessories box is so hard to find i actually demanded another sent out till i found it in the hard drive bay 3 days later.
I apologise and wont accept a partial refund as it will be wrong to do so… god knows i can use the money and put it to a gaming chair and desk tho 🙁
All in all. Buy one and check the hdd bay for the accessories box. Jobs a good one.
he nzxt 510 case not the i or elite model
excellent case for the 70 price, great build quailty and easy to install one of the best cases i have used.
only one matter is the air flow. if you need a lot more air flow got for another like fractal case , otherwise top case. if going with air cooling like the arctic freezer dua this case is great. reminder one usb at front and one usb c ! prefer two usb 2-3.
he nzxt 510 case not the i or elite model
excellent case for the 70 price, great build quailty and easy to install one of the best cases i have used.
only one matter is the air flow. if you need a lot more air flow got for another like fractal case , otherwise top case. if going with air cooling like the arctic freezer dua this case is great. reminder one usb at front and one usb c ! prefer two usb 2-3.