Philips 3-in-1 Purifier, Fan and Heater 2000 Series, Purifies rooms up to 42 m² 165 m³/h clean air rate (CADR) HEPA & Active Carbon filters, AMF220/35, Black
Purifying fan mode
Delivers a gentle stream of fresh air, ideal for making rooms experiencing warmer temperatures more comfortable. The fan mode only blows out purified air, ensuring you breathe and enjoy clean and refreshing air at home.
Purifying heater mode
Ceramic element heats up the air in just 3 seconds to deal with cooler environments quickly. The heater mode only blows out purified air, letting you breathe and enjoy clean and cozy air at home.
-
350° oscillation
Adjustable 350° oscillation enables to circulate the air as you need it across the room.
-
Purifies rooms up to 42 m2
Effective purification performance of 165 m³/h of Clean Air Delivery Rate (CADR), it can purify rooms up to 42 m² ** and it can effectively clean the air of a 20 m² room in 17.5 minutes.
-
3 layers HEPA filter
3 layers: pre-filter, HEPA and carbon. Pre-filter captures dust and hair. HEPA traps PM2.5, viruses, bacteria, pollen, dust, pet dander, gas and pollutants. Activated carbon removes gases and odors.
-
Remote control
Magnetic remote control provides simple operation and returns easily to the dock in the device.
-
Light control and sleep mode
3-level setting for lights display. Fully lit option indicates operation mode (heater or fan). Partially lit option shows only the display. Sleep mode option turns off all the lights on the device.
How does Philips 3-in-1 Purifier, Fan & Heater purify the air?
An air purifier works by driving air through the filter, cleaning the air from pollutants passing through it. Filtering efficiency and airflow speed drive better purification performance.
What is the quality of the filter of Philips 3-in-1 Purifier, Fan & Heater?
This purifier uses a HEPA filtration system which delivers a filtration efficiency of 99.95% in particles as small as 0.003 microns.
How often should I replace the filter of Philips 3-in-1 Purifier, Fan & Heater?
The filter can last up to 24 months after the first use. This recommendation is a theoretical calculation based on certain usage conditions. You can find more information about it at philips.com
What is the purification performance of Philips 3-in-1 Purifier, Fan & Heater?
The key performance indicator of a purifier is CADR (Clean Air Delivery Rate): the clean airflow generated in 1 hour. The higher CADR, the faster the cleaning. The dirtier the room, the higher the CADR must be. This purifier has a CADR of 165 m³/h.
How does the air quality sensor of Philips 3-in-1 Purifier, Fan & Heater work?
This purifier has a laser particle sensor that responds to suspended particles in the air. It measures the concentration of PM2.5 (particles in the air smaller than 2.5 microns) and shows it in real-time with both numerical and color-coded feedback.
| Weight: | 4.92 kg |
| Dimensions: | 25 x 25 x 59 cm; 4.92 Kilograms |
| Model: | AMF220/35 |
| Part: | AMF220/35 |
| Colour: | Black |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Manufacture: | Philips |
| Colour: | Black |
| Quantity: | 1 |
It’s worth spending money
Heats room quite well
Quite operation
Can set timer which is good optio
Very pleased with this unit. Really warms up the conservatory on the cool days, quickly brings the air quality down to 002 in no time. Helped with my relentless hay fever. Can’t wait to use the cooling fan when the seasons change and the summers here.
Very good you can feel the difference very fast especially if you have pets. It covers all house, a 3 bedroom house in my case. I never thought it will be that much of a difference. Really recommend this produc
I really love this product. It keeps the room warm even if there is only speed mode. The air quality sensor works well. I feel the air in the room is quite clean.
Bought to improve the air quality in our downstairs kitchen and lounge/diner, with the added bonus of providing a heating or cooling boost. Situated in a recess area alongside an arched opening, the air purifier is on all day, with a 7kw fan, so minimal cost, on lowest setting of 3, swivelling on the base in a 60 degree arc. This does mean that a cool breeze is blowing continuously but not overly so, and if sufficient distance from any seating area, is barely noticeable. If a boost of heat is required, there are again 3 settings with the lowest of 1250kw providing a warm stream of air between the two areas. According to a energy comparison site, a 20 pence per unit cost, for 6 x half hours a day, costs 75 pence. Level 2 & 3 fan speeds are very efficient and can be felt some metres away. The swivel facility also provides 2 further extensions of the unit to approximately 120 & 350 degrees. As soon as the cooking starts the air purifier kicks in and works well in cleaning the air quickly and efficiently. Not cheap but not as expensive as a Dyson equivalent with similar performance.
The Philips 3-in-1 Purifier, Fan and Heater 2000 Series was something I was looking for that not only heated the room but also outputs purified air in heat mode. I am glad I bought this Philips purifier this replaces my overpriced Dyson that never had enough power and performed poorly. This unit outperforms my previous Dyson air purifier in every way.
Design
This unit is small and half the size of the previous dyson yet it looks better and feels more premium. This unit is well built and sturdy the materials used on this device feels premium and robust. This air purifier doesn’t take up a lot of room and can be put anywhere. All the controls are clearly labelled and are on top and easily accessible. The LCD screen is nice and bright and gives readings of room temperature/ humidity and other readings like air quality. Overall a compact sturdy and pleasing design.
Performance/Usability
This performs well it easily purifies a medium room without any compromises I can feel and smell the purified air quality outputting from this unit. Both options of heat and cold output is enough airflow to feel the effect quickly. I am really impressed how fast this heats my room, you can really feel the heat blasted out is clean HEPA filtered hot air rather than the standard musky heat normally heaters give out. This cools the room quickly when set at the highest setting and found that it kept us cool in the summer. There are 3 heat/cold settings and also an Adjustable 350 oscillation mode to circulate air in all directions. There is also a sleep mode timer too. The fan has a LED ring around it that tells you if its hot air or cold air mode using red for hot and blue for cold.
This comes with fancy little remote that’s comfortable to hold and is clearly labelled, it’s also magnetic and can attach to the back of the heater.
Overall very happy with this product it’s not only a HEPA air purifier but a good heater that’s compact and well built.
Sound wise this is great, likewise in heat mode. Doesn’t seem to cool the room very much on a hot night though air circulation is helpful and makes things more comfortable.
This is a very good fan to heat up a small room. Noise it fine, remote works perfect. The cooling fan is just a normal fan as expected but knew it was not air conditioning. The air filter works great. The only one downside is no temp regulation. So its on, off or timer. Can’t set it to 20 degrees and let it maintain that temp for example.
Seems well made, does what I want in terms of cleaning the air
No better than a medium sized fan for cooling, but that’s not why I bought i
Aswell this definitely made things better with pet allergy, i have a dog with long coat, double coat.
The oscillating mode is silent and smooth.
In the video I have it set to sleep mode (no lights or display on) as the light around the fan gets distracting.
Its a perfect height we we take it into the bedroom for the evening.
Due to the heat wave I haven’t tried the heater, will update later on that.